Abnormal grain growth behavior and mechanism of 6005A aluminum alloy extrusion profile

[1]  Zhiyi Liu,et al.  Effects of Temperature Distribution on Microstructure and Mechanical Properties of Hot Extruded Al–Zn–Mg–Cu Alloy Pipe with Variable Cross-Section , 2022, Metals and Materials International.

[2]  Guoqun Zhao,et al.  Effects of abnormal grain growth at longitudinal weld on the aging behavior and mechanical properties of 2196 Al Cu Li alloy profile , 2021 .

[3]  Guoqun Zhao,et al.  Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy , 2021 .

[4]  Guoqun Zhao,et al.  Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment , 2021 .

[5]  R. Ruoff,et al.  Strain-induced abnormal grain growth of Fe foils , 2021 .

[6]  Bin Wang,et al.  Influence of surface enhanced treatment on microstructure and fatigue performance of 6005A aluminum alloy welded joint , 2020 .

[7]  Guoqun Zhao,et al.  Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions , 2020 .

[8]  H. Jafarian,et al.  Simulation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy , 2020 .

[9]  Guoqun Zhao,et al.  Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die , 2020 .

[10]  Guoqun Zhao,et al.  Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties , 2020 .

[11]  Yifan Zhao,et al.  Microstructure and Mechanical Properties of Friction Stir Welded Joint of an Aluminum Alloy Sheet 6005A-T4 , 2019, Metals.

[12]  Guoqun Zhao,et al.  Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195 , 2019, Journal of Materials Research and Technology.

[13]  K. Trumble,et al.  A Study on Peripheral Grain Structure Evolution of an AA7050 Aluminum Alloy with a Laboratory-Scale Extrusion Setup , 2019, Journal of Materials Engineering and Performance.

[14]  Guoqun Zhao,et al.  Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy , 2019, Journal of Materials Processing Technology.

[15]  Q. Lei,et al.  Microstructural evolution and failure mechanism of an extrusion welded aluminum alloy tube during hydroforming processing , 2019, Materials Science & Engineering: A.

[16]  Y. Miyashita,et al.  Texture and strain-induced abnormal grain growth in cryogenic friction stir processing of severely deformed aluminum alloy , 2019, Materials Characterization.

[17]  S. Srivatsa,et al.  Formation mechanism of abnormally large grains in a polycrystalline nickel-based superalloy during heat treatment processing , 2019, Acta Materialia.

[18]  A. Wagih,et al.  Improved mechanical and wear properties of hybrid Al-Al2O3/GNPs electro-less coated Ni nanocomposite , 2018, Ceramics International.

[19]  M. Zheng,et al.  Microstructure and texture evolution of deformed Mg-Zn alloy during recrystallization , 2018, Materials Characterization.

[20]  Siyu Sun,et al.  Microstructure and properties in the weld surface of friction stir welded 7050-T7451 aluminium alloys by laser shock peening , 2018, Vacuum.

[21]  Bing Chen,et al.  Effect of aging on the corrosion behavior of 6005 Al alloys in 3.5 wt% NaCl aqueous solution , 2018 .

[22]  S. Lei,et al.  The Prediction of Microstructure Evolution of 6005A Aluminum Alloy in a P-ECAP Extrusion Study , 2018, Journal of Materials Engineering and Performance.

[23]  Y. Araki,et al.  Ultra-large single crystals by abnormal grain growth , 2017, Nature Communications.

[24]  Yufeng Sun,et al.  Effect of abnormal grain growth on microstructure and mechanical properties of friction stir welded SPCC steel plates , 2017 .

[25]  Yan Zhiyong,et al.  Microstructure and mechanical properties of extrusion welds in continuous extrusion of AA6063 aluminium alloy with double billets , 2016 .

[26]  Ying-hong Peng,et al.  Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion , 2016 .

[27]  Guoqun Zhao,et al.  Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles , 2016 .

[28]  J. Duszczyk,et al.  Mechanism of the formation of peripheral coarse grain structure in hot extrusion of Al-4.5Zn-1Mg , 2016 .

[29]  S. Agnew,et al.  Texture enhancement during grain growth of magnesium alloy AZ31B , 2015 .

[30]  E. Holm,et al.  Dynamic abnormal grain growth in tantalum , 2014 .

[31]  Yoshikazu Araki,et al.  Abnormal Grain Growth Induced by Cyclic Heat Treatment , 2013, Science.

[32]  N. P. Gurao,et al.  Deformation behaviour at macro- and nano-length scales: The development of orientation gradients , 2013 .

[33]  Jie Liu,et al.  Effects of welding speed on the microstructure and hardness in friction stir welding joints of 6005A-T6 aluminum alloy , 2013 .

[34]  D. Ko,et al.  Improvement of mechanical properties of Al6061 extrudate by die cooling with N2 gas during hot extrusion , 2013 .

[35]  H. Kokawa,et al.  Texture Produced by Abnormal Grain Growth in Friction Stir-Welded Aluminum Alloy 1050 , 2013, Metallurgical and Materials Transactions A.

[36]  Wei Chen,et al.  Study on microstructure and mechanical properties of Al–Mg–Si–Cu alloy with high manganese content , 2012 .

[37]  Dirk J. Schipper,et al.  Friction conditions in the bearing area of an aluminium extrusion process , 2012 .

[38]  Yi Han,et al.  Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature , 2010 .

[39]  F. J. Humphreys,et al.  Abnormal grain growth in Al–3.5Cu , 2009 .

[40]  C. Mondal,et al.  Tensile properties of peak aged 7055 aluminum alloy extrusions , 2007 .

[41]  Paul T. Wang,et al.  Evolution of surface recrystallization during indirect extrusion of 6xxx aluminum alloys , 2005 .

[42]  J. Stephen,et al.  Structure-Property Correlations in Al-Li Alloy Integrally Stiffened Extrusions , 2001 .

[43]  G. Tempus,et al.  Influence of extrusion process parameters and texture on mechanical properties of Al–Li extrusions , 1991 .

[44]  G. Tempus,et al.  INFLUENCE OF EXTRUSION PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF Al-Li-EXTRUSIONS , 1987 .

[45]  David J. Srolovitz,et al.  Computer simulation of grain growth—V. Abnormal grain growth , 1985 .

[46]  J. Mackenzie,et al.  SECOND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES , 1958 .