Minimum weight layouts of spanning structures obtained using graphic statics

The focus of this article is to identify an analytical description for the layout of a minimum volume truss that is uniformly loaded. Two different span conditions are considered: single and multiple spans. The multiple-span condition is supported at equally spaced locations. The methodology utilized for the solution of the problems takes advantage of Maxwell’s Theorem of Load Paths and the properties of reciprocal diagrams in Graphic Statics. This approach provides considerable insight in the properties of the optimal layouts for the given boundary and loading conditions. In Graphic Statics, the solution to a problem is based on tracing two related diagrams: the form and the force diagram. These obtained graphs can also be viewed as the definition of two dual structures. A force diagram created for a truss structure (form diagram) can be understood as the layout of a (dual) structure with its own loading condition. Therefore, the optimization can be conducted in either space (the force or the form). The analytical solutions obtained in this article are verified numerically using a ground structure optimization tool.

[1]  Lauren L. Beghini,et al.  Rankine’s Theorem for the design of cable structures , 2013 .

[2]  Arkadiusz Mazurek.  Geometrical aspects of optimum truss like structures for three-force problem , 2012 .

[3]  Richard E. McConnel.  Least-Weight Frameworks for Loads Across Span , 1974 .

[4]  Matthew Gilbert,et al.  Michell structure for a uniform load over multiple spans , 2011 .

[5]  William F. Baker,et al.  On the layout of a least weight multiple span structure with uniform load , 2015 .

[6]  Lauren L. Beghini,et al.  Structural optimization using graphic statics , 2014 .

[7]  Tomasz Sokół,et al.  A 99 line code for discretized Michell truss optimization written in Mathematica , 2011 .

[8]  Lauren L. Beghini,et al.  Maxwell’s reciprocal diagrams and discrete Michell frames , 2013 .

[9]  Glaucio H. Paulino,et al.  Topology optimization for braced frames: Combining continuum and beam/column elements , 2012 .

[10]  Carlos Vázquez Espí,et al.  On the layout of a least weight single span structure with uniform load , 2015 .

[11]  William F. Baker,et al.  Geometrical aspects of optimum truss like structures , 2011 .

[12]  Waclaw Zalewski,et al.  Shaping Structures: Statics , 1997 .

[13]  A. Michell.  LVIII. The limits of economy of material in frame-structures , 1904 .

[14]  Tomasz Sokół,et al.  On the solution of the three forces problem and its application in optimal designing of a class of symmetric plane frameworks of least weight , 2010 .