Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties

Abstract Despite the great potential of graphene as the nanofiller, to achieve homogeneous dispersion remains the key challenge for effectively reinforcing the polymer. Here, we report an eco-friendly strategy for fabricating the polymer nanocomposites with well-dispersed graphene sheets in the polymer matrix via first coating graphene using polypropylene (PP) latex and then melt-blending the coated graphene with PP matrix. A ∼75% increase in yield strength and a ∼74% increase in the Young’s modulus of PP are achieved by addition of only 0.42 vol% of graphene due to the effective external load transfer. The glass transition temperature of PP is enhanced by ∼2.5 °C by incorporating only 0.041 vol% graphene. The thermal oxidative stability of PP is also remarkably improved with the addition of graphene, for example, compared with neat PP, the initial degradation temperature is enhanced by 26 °C at only 0.42 vol% of graphene loading.

[1]  Qinghua Zhang,et al.  Use of dynamic rheological behavior to estimate the dispersion of carbon nanotubes in carbon nanotube/polymer composites. , 2008, The journal of physical chemistry. B.

[2]  J. Loos,et al.  Preparation of Conductive Nanotube–Polymer Composites Using Latex Technology , 2004 .

[3]  J. Loos,et al.  Isotactic polypropylene/carbon nanotube composites prepared by latex technology. Thermal analysis of carbon nanotube-induced nucleation , 2008 .

[4]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[5]  F. Tuinstra,et al.  Raman Spectrum of Graphite , 1970 .

[6]  J. Loos,et al.  Latex-based concept for the preparation of graphene-based polymer nanocomposites , 2010 .

[7]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[8]  R. Car,et al.  Raman spectra of graphite oxide and functionalized graphene sheets. , 2008, Nano letters.

[9]  R. Ruoff,et al.  Graphene-based polymer nanocomposites , 2011 .

[10]  C. Macosko,et al.  Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods , 2011 .

[11]  Dale W. Schaefer,et al.  How Nano Are Nanocomposites , 2007 .

[12]  Ravi Prasher,et al.  Graphene Spreads the Heat , 2010, Science.

[13]  O. Monticelli,et al.  Stimuli-responsive polymer hydrogels containing partially exfoliated graphite , 2010 .

[14]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[15]  Lee Luong,et al.  Epoxy/graphene platelets nanocomposites with two levels of interface strength , 2011 .

[16]  C. Macosko,et al.  Morphology and Properties of Polyester/Exfoliated Graphite Nanocomposites , 2008 .

[17]  Rodney S. Ruoff,et al.  Polymer−Graphite Nanocomposites:  Effective Dispersion and Major Property Enhancement via Solid-State Shear Pulverization , 2008 .

[18]  Zhong-Zhen Yu,et al.  Polypropylene/Graphene Oxide Nanocomposites Prepared by In Situ Ziegler−Natta Polymerization , 2010 .

[19]  J. Loos,et al.  Strategies for dispersing carbon nanotubes in highly viscous polymers , 2005 .

[20]  L. Ye,et al.  Mode I interlaminar fracture of co-mingled yarn based glass/polypropylene composites , 1993 .

[21]  L. Drzal,et al.  Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets , 2007 .

[22]  B. Guo,et al.  Halloysite nanotubes as a novel β-nucleating agent for isotactic polypropylene , 2009 .

[23]  N. Koratkar,et al.  Enhanced mechanical properties of nanocomposites at low graphene content. , 2009, ACS nano.

[24]  Sunil P. Lonkar,et al.  Preparation and nonisothermal crystallization behavior of polypropylene/ layered double hydroxide nanocomposites , 2009 .

[25]  Shing Chung Josh Wong,et al.  Electrical conductivity and dielectric properties of PMMA/expanded graphite composites , 2003 .

[26]  R. Layek,et al.  Physical and mechanical properties of poly(methyl methacrylate) -functionalized graphene/poly(vinylidine fluoride) nanocomposites: Piezoelectric β polymorph formation , 2010 .

[27]  S. Stankovich,et al.  Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide , 2007 .

[28]  Riichiro Saito,et al.  Raman spectroscopy on isolated single wall carbon nanotubes , 2002 .

[29]  K. Lafdi,et al.  Use of exfoliated graphite filler to enhance polymer physical properties , 2007 .

[30]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[31]  J. Halpin,et al.  Ribbon Reinforcement of Composites , 1968 .

[32]  Byung Kyu Kim,et al.  Properties of Waterborne Polyurethane/ Functionalized Graphene Sheet Nanocomposites Prepared by an in situ Method , 2009 .

[33]  S. Wong,et al.  Electrical and mechanical properties of expanded graphite‐reinforced high‐density polyethylene , 2004 .

[34]  Marco Zanetti,et al.  Thermal behaviour of poly(propylene) layered silicate nanocomposites , 2001 .

[35]  L. Brinson,et al.  Functionalized graphene sheets for polymer nanocomposites. , 2008, Nature nanotechnology.

[36]  R. Car,et al.  Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite , 2007 .

[37]  Yan Wang,et al.  Molecular‐Level Dispersion of Graphene into Poly(vinyl alcohol) and Effective Reinforcement of their Nanocomposites , 2009 .

[38]  F. Fim,et al.  Polyethylene/graphite nanocomposites obtained by in situ polymerization , 2010 .

[39]  S. Bose,et al.  In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites , 2010 .

[40]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[41]  J. Torkelson,et al.  Polypropylene-graphite nanocomposites made by solid-state shear pulverization: Effects of significantly exfoliated, unmodified graphite content on physical, mechanical and electrical properties , 2010 .

[42]  Zhong-Zhen Yu,et al.  Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding , 2010 .

[43]  Dajun Chen,et al.  Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites , 2010 .

[44]  A. Raghu,et al.  Preparation and Physical Properties of Waterborne Polyurethane/Functionalized Graphene Sheet Nanocomposites , 2008 .

[45]  G. Shi,et al.  Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure , 2009 .

[46]  Angel Rubio,et al.  Single‐Walled Carbon Nanotube–Polymer Composites: Strength and Weakness , 2000 .

[47]  C. Giacomelli,et al.  Uniaxial compression and stretching deformation of an i-PP/EPDM/organoclay nanocomposite , 2011 .

[48]  Klaus Kern,et al.  Elastic properties of chemically derived single graphene sheets. , 2008, Nano letters.

[49]  J. Tascón,et al.  Atomic force and scanning tunneling microscopy imaging of graphene nanosheets derived from graphite oxide. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[50]  Jie Jin,et al.  Preparation and characterisation of covalent polymer functionalized graphene oxide , 2011 .