Simultaneous optimization of tool path and shape for five-axis flank milling

By representing the swept envelope of a generic rotary cutter as a sphere-swept surface, our previous work on distance function based tool path optimization is extended to develop the model and algorithm for simultaneous optimization of the tool path and shape for five-axis flank milling. If the tool path is fixed, a novel tool shape optimization method is obtained. If the tool shape is fixed, a tool path optimization method applicable to any rotary cutter is obtained. The approach applies to non-ruled surfaces, and also finds applications in cutter dimension optimization and flank millable surface design. Numerical examples are given to confirm its validity.

[1]  Han Ding,et al.  Analytical Expression of the Swept Surface of a Rotary Cutter Using the Envelope Theory of Sphere Congruence , 2009 .

[2]  Chenggang Li.  Surface Design for Flank Milling , 2007 .

[3]  Kwanhee Lee,et al.  Minimum distance between two sphere-swept surfaces , 2007, Comput. Aided Des..

[4]  Jian Liu,et al.  Improved positioning of cylindrical cutter for flank milling ruled surfaces , 2005, Comput. Aided Des..

[5]  Claire Lartigue,et al.  Tool path deformation in 5-axis flank milling using envelope surface , 2003, Comput. Aided Des..

[6]  Han Ding,et al.  Global optimization of tool path for five-axis flank milling with a cylindrical cutter , 2009, Comput. Aided Des..

[7]  Han Ding,et al.  Geometry of Signed Point-to-Surface Distance Function and Its Application to Surface Approximation , 2010, J. Comput. Inf. Sci. Eng..

[8]  Ning Wang,et al.  Optimize tool paths of flank milling with generic cutters based on approximation using the tool envelope surface , 2009, Comput. Aided Des..

[9]  Johanna Senatore,et al.  Analysis of improved positioning in five-axis ruled surface milling using envelope surface , 2005, Comput. Aided Des..

[10]  John C. J. Chiou,et al.  Accurate tool position for five-axis ruled surface machining by swept envelope approach , 2004, Comput. Aided Des..

[11]  Walter Rubio,et al.  Five-axis NC milling of ruled surfaces: Optimal geometry of a conical tool , 2002 .

[12]  Han Ding,et al.  Global optimization of tool path for five-axis flank milling with a cylindrical cutter , 2009 .

[13]  Gérard Poulachon,et al.  New approach to 5-axis flank milling of free-form surfaces: Computation of adapted tool shape , 2009, Comput. Aided Des..

[14]  Pierre-Yves Pechard,et al.  Geometrical deviations versus smoothness in 5-axis high-speed flank milling , 2009 .