A New Technique for Measuring Ferrite Core Loss Under DC Bias Conditions

It is well known that the measurement of ferrite core losses is difficult, particularly under low power factor conditions for which the excitation VA drawn is large relative to the power dissipated in the ferrite core. This paper proposes a new technique, called mutual inductance neutralization, which overcomes this difficulty by compensating for the reactive power drawn by the circuit through the use of an air cored mutual inductor. Based on the technique, circuits are presented which are appropriate for core loss measurement in the absence, and the presence of a dc bias. Measured results are presented which verify the accuracy of the technique, and results are also presented showing the effect of dc bias conditions on the losses of the ferrite core under test.

[1]  S Butterworth.  Capacity and Eddy Current Effects in Inductometers , 1920 .

[2]  P. Bertoldi.  European code of conduct to improve energy efficiency of power supply: the first policy action around the worldwide addressing external power supplies , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[3]  Alex Van den Bossche,et al.  Ferrite losses of cores with square wave voltage and dc bias , 2006 .

[4]  Fred C. Lee,et al.  Domain wall resonance and its effect on losses in ferrites , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[5]  M. H. Pong,et al.  Analysis of buck-boost converter inductor loss using a simple online B-H curve tracer , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[6]  James T. Niemann.  Electrical Measurements , 1934, Nature.

[7]  Harry A. Owen,et al.  High-frequency measurement techniques for magnetic cores , 1985, 1985 IEEE Power Electronics Specialists Conference.

[8]  A. Brockmeyer,et al.  Frequency dependence of the ferrite-loss increase caused by premagnetization , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[9]  A. Brockmeyer.  Experimental evaluation of the influence of DC-premagnetization on the properties of power electronic ferrites , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[10]  A. Mansoor,et al.  Active mode power supply efficiency: key issues, measured data and the design competition opportunity , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[11]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[12]  A. Fanara.  Energy star/spl reg/: a strategy to encourage improved efficiency of power supplies , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[13]  U. Madawala,et al.  The Effect of DC Bias Conditions on Ferrite Core Losses , 2008, IEEE transactions on magnetics.

[14]  W. A. Edson.  The Single-Layer Solenoid as an RF Transformer , 1955, Proceedings of the IRE.

[15]  U.K. Madawala,et al.  An Investigation into the Impact of DC Bias Conditions on Ferrite Core Losses , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[16]  L. Hartshorn.  The properties of mutual inductance standards at telephonic frequencies , 1925 .

[17]  Fred C. Lee,et al.  Some practical issues related to core loss measurement using impedance analyzer approach , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.