A method for the design of 3D scaffolds for high-density cell attachment and determination of optimum perfusion culture conditions.

The application of in vitro cultured cells in tissue engineering or drug screening, aimed at complex soft tissues such as liver, requires in vivo physiological function of the cultured cells. For this purpose, the scaffold in which cells are cultured should provide a microenvironment similar to an in vivo one with a three-dimensional extracellular matrix, a high supply capacity of O(2) and nutrients, and high cell density. In this paper, we propose a method to design (1) the geometry of the scaffold, with a surface/volume ratio optimized to allow high-density (5 x 10(7)cells/mL) cell culture and (2) culture conditions that will supply optimal quantities of oxygen and nutrients. CFD modeling of mass transport was used to determine the shear stress as well as O(2) and glucose metabolism in the scaffold (20 mm width-35 mm length) for various flow rates. Validation of the model was done through comparison with flow resistance and micro-PIV experiments. CFD analysis showed the maximum metabolic rate densities for this scaffold are 6.04 x 10(-3)mol/s/m(3) for O(2) at 0.71 mL/min and 1.91 x 10(-2)mol/s/m(3) for glucose at 0.35 mL/min.

[1]  Joyce Y. Wong,et al.  Building structure into engineered tissues , 2006 .

[2]  S. Ramakrishna,et al.  Hybrid braided 3-D scaffold for bioartificial liver assist devices , 2007, Journal of biomaterials science. Polymer edition.

[3]  Linda G Griffith,et al.  Emerging Design Principles in Biomaterials and Scaffolds for Tissue Engineering , 2002, Annals of the New York Academy of Sciences.

[4]  G. Whitesides,et al.  Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies , 2003, Electrophoresis.

[5]  Sangeeta N Bhatia,et al.  Fabrication of three-dimensional tissues. , 2007, Advances in biochemical engineering/biotechnology.

[6]  Hiroyuki Honda,et al.  Three-dimensional high-density culture of HepG2 cells in a 5-ml radial-flow bioreactor for construction of artificial liver. , 2005, Journal of bioscience and bioengineering.

[7]  T. Nakamura,et al.  Reciprocal modulation of growth and differentiated functions of mature rat hepatocytes in primary culture by cell--cell contact and cell membranes. , 1983, Proceedings of the National Academy of Sciences of the United States of America.

[8]  Jeffrey T Borenstein,et al.  Microfabrication of three-dimensional engineered scaffolds. , 2007, Tissue engineering.

[9]  D. Wendt,et al.  The role of bioreactors in tissue engineering. , 2004, Trends in biotechnology.

[10]  P. Davies,et al.  Flow-mediated endothelial mechanotransduction. , 1995, Physiological reviews.

[11]  M. Toner,et al.  Microfabricated grooved substrates as platforms for bioartificial liver reactors. , 2005, Biotechnology and bioengineering.

[12]  A. Ahluwalia,et al.  Microfabricated fractal branching networks. , 2004, Journal of biomedical materials research. Part A.

[13]  S. Alper,et al.  Hemodynamic shear stress and its role in atherosclerosis. , 1999, JAMA.

[14]  Vladimir Mironov,et al.  Organ printing: computer-aided jet-based 3D tissue engineering. , 2003, Trends in biotechnology.

[15]  F. Boschetti,et al.  Prediction of the micro-fluid dynamic environment imposed to three-dimensional engineered cell systems in bioreactors. , 2006, Journal of biomechanics.

[16]  Jyh-Ping Chen,et al.  High-density culture of hepatocytes in a packed-bed bioreactor using a fibrous scaffold from plant , 2006 .

[17]  A. Ichihara.  Mechanisms controlling growth of hepatocytes in primary culture , 1991, Digestive Diseases and Sciences.

[18]  N Ohshima,et al.  Novel cell immobilization method utilizing centrifugal force to achieve high-density hepatocyte culture in porous scaffold. , 2001, Journal of biomedical materials research.

[19]  H. Schlichting.  Boundary Layer Theory , 1955 .

[20]  Gradients of O2 concentration in hepatocytes. , 1978, The Journal of biological chemistry.

[21]  Teruo Fujii,et al.  Cell Culture in 3-Dimensional Microfluidic Structure of PDMS (polydimethylsiloxane) , 2003 .

[22]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[23]  Smadar Cohen,et al.  Liver tissue engineering within alginate scaffolds: effects of cell-seeding density on hepatocyte viability, morphology, and function. , 2003, Tissue engineering.

[24]  Robert Bond,et al.  Hepatocyte function in a radial-flow bioreactor using a perfluorocarbon oxygen carrier. , 2005, Artificial organs.

[25]  B Lepioufle,et al.  Study of osteoblastic cells in a microfluidic environment. , 2006, Biomaterials.

[26]  Eric Gottwald,et al.  Microstructured scaffolds for liver tissue cultures of high cell density: Morphological and biochemical characterization of tissue aggregates , 2005, Journal of cellular biochemistry.

[27]  Robert Langer,et al.  Three‐Dimensional Microfluidic Tissue‐Engineering Scaffolds Using a Flexible Biodegradable Polymer , 2006, Advanced materials.

[28]  P H Krebsbach,et al.  Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. , 2003, Biomaterials.

[29]  Helene Andersson,et al.  Microfabrication and microfluidics for tissue engineering: state of the art and future opportunities. , 2004, Lab on a chip.

[30]  J Tramper,et al.  The effect of PEGT/PBT scaffold architecture on oxygen gradients in tissue engineered cartilaginous constructs. , 2004, Biomaterials.

[31]  C. Cho,et al.  Hepatocyte-specific porous polymer-scaffolds of alginate/galactosylated chitosan sponge for liver-tissue engineering , 2001, Biotechnology Letters.

[32]  Etienne Burdet,et al.  Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering. , 2005, Macromolecular bioscience.

[33]  Joseph P Vacanti,et al.  Hepatic tissue engineering. , 2004, Transplant immunology.

[34]  L G Griffith,et al.  Cell-substratum adhesion strength as a determinant of hepatocyte aggregate morphology. , 1997, Biotechnology and bioengineering.

[35]  Roger Zauel,et al.  3-D computational modeling of media flow through scaffolds in a perfusion bioreactor. , 2005, Journal of biomechanics.