Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods

In this study, a method to opto-electronically probe the individual junctions and carrier transport across interfaces in fully printed and coated tandem polymer solar cells is described, enabling the identification of efficiency limiting printing/coating defects. The methods used are light beam induced current (LBIC) mapping, External quantum efficiency (EQE) measurements, and monochromatic current–voltage (I–V) characterization. Using these methods, inherent limitations to the accuracy of EQE and LBIC measurements on non-ideal tandem solar cells are identified and described through the use of a small-signal electrical model. The model is able to predict the EQE spectrum of the non-ideal polymer tandem solar cell, using extracted values of shunt- and series resistance of the individual junction of the tandem cell. This finally enables LBIC mapping of the individual junctions of the tandem polymer solar cells, using a combination of light and voltage-biasing.

[1]  J. Marek,et al.  Light-beam-induced current characterization of grain boundaries , 1984 .

[2]  F. Krebs,et al.  Electrical and Photo‐Induced Degradation of ZnO Layers in Organic Photovoltaics , 2011 .

[3]  Wilhelm Warta,et al.  Solar cell efficiency tables (version 42) , 2013 .

[4]  R. Gottschalg,et al.  Multi-laser LBIC system for thin film PV module characterisation , 2009 .

[5]  Christoph J. Brabec,et al.  Highly efficient organic tandem solar cells: a follow up review , 2013 .

[6]  Srinivas Sista,et al.  Tandem polymer photovoltaic cells—current status, challenges and future outlook , 2011 .

[7]  Jing-Jing Li,et al.  Elimination of Artifacts in External Quantum Efficiency Measurements for Multijunction Solar Cells Using a Pulsed Light Bias , 2013, IEEE Journal of Photovoltaics.

[8]  Suren A. Gevorgyan,et al.  Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules , 2013 .

[9]  Markus Hösel,et al.  OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools , 2013 .

[10]  E. V. Dyk,et al.  Application of LBIC measurements for characterisation of triple junction solar cells , 2014 .

[11]  Kristian O. Sylvester-Hvid,et al.  A solution process for inverted tandem solar cells , 2011 .

[12]  M. Wienk,et al.  Measuring the External Quantum Efficiency of Two‐Terminal Polymer Tandem Solar Cells , 2010 .

[13]  Ole Hagemann,et al.  All solution processed tandem polymer solar cells based on thermocleavable materials , 2008 .

[14]  Thomas R. Betts,et al.  Spatially distributed model for the analysis of laser beam induced current (LBIC) measurements of thin film silicon solar modules , 2011 .

[15]  Weiwei Li,et al.  Efficient tandem and triple-junction polymer solar cells. , 2013, Journal of the American Chemical Society.

[16]  Measuring the current density – voltage characteristics of individual subcells in two-terminal polymer tandem solar cells , 2011 .

[17]  S. Hegedus,et al.  Quantitative analysis and extraction of cell parameters from interconnected thin-film solar modules through LBIC-voltage sweeps , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.

[18]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[19]  F. Krebs,et al.  2D Characterization of OPV from Single and Tandem Cells to Fully Roll‐to‐Roll Processed Modules with and without Electrical Contact , 2014 .

[20]  B. Sopori,et al.  Some investigations on the influence of defects/grain boundaries on photovoltaic mechanisms in polycrystalline silicon films , 1980 .

[21]  F. Krebs,et al.  Photovoltaic Performance of Polymers Based on Dithienylthienopyrazines Bearing Thermocleavable Benzoate Esters , 2010 .

[22]  Yang Yang,et al.  A Robust Inter‐Connecting Layer for Achieving High Performance Tandem Polymer Solar Cells , 2011, Advanced materials.

[23]  F. Krebs,et al.  Roll-to-roll processed polymer tandem solar cells partially processed from water , 2012 .

[24]  D. Redfield.  Silicon-silicon interfaces , 1982 .

[25]  Suren A. Gevorgyan,et al.  A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers , 2014 .

[26]  Gang Li,et al.  Recent trends in polymer tandem solar cells research , 2013 .

[27]  Mikkel Jørgensen,et al.  Upscaling of polymer solar cell fabrication using full roll-to-roll processing. , 2010, Nanoscale.

[28]  Yang Yang,et al.  An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11% , 2014, Advanced materials.

[29]  Martin A. Green,et al.  Solar cell efficiency tables (version 41) , 2013 .

[30]  W. Warta,et al.  Solar cell efficiency tables (Version 45) , 2015 .

[31]  Raj René Janssen,et al.  Electronic memory effects in diodes from a zinc oxide nanoparticle-polystyrene hybrid material , 2006 .

[32]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[33]  Wilhelm Warta,et al.  Spectral response measurements of monolithic GaInP/Ga(In)As/Ge triple‐junction solar cells: Measurement artifacts and their explanation , 2003 .

[34]  Frederik C. Krebs,et al.  Life cycle analysis of organic tandem solar cells: When are they warranted? , 2014 .

[35]  Jing-Jing Li,et al.  Combined Effects of Shunt and Luminescence Coupling on External Quantum Efficiency Measurements of Multijunction Solar Cells , 2011, IEEE Journal of Photovoltaics.

[36]  Paul W. M. Blom,et al.  Organic Tandem and Multi‐Junction Solar Cells , 2008 .

[37]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[38]  Mikkel Jørgensen,et al.  Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique , 2011 .

[39]  George E. Georghiou,et al.  Voltage and light bias dependent quantum efficiency measurements of GaInP/GaInAs/Ge triple junction devices , 2013 .

[40]  Suren A. Gevorgyan,et al.  Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules , 2014 .

[41]  Andrew J. Medford,et al.  The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics , 2010 .

[42]  Mikkel Jørgensen,et al.  Enabling Flexible Polymer Tandem Solar Cells by 3D Ptychographic Imaging , 2015 .

[43]  Yang Yang,et al.  Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole. , 2008, Journal of the American Chemical Society.

[44]  B. Hansen,et al.  Multiple junction cell characterization using the LBIC method: early results, issues, and pathways to improvement , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[45]  Markus Hösel,et al.  Solar cells with one-day energy payback for the factories of the future , 2012 .

[46]  David Braun,et al.  Semiconducting polymer‐buckminsterfullerene heterojunctions: Diodes, photodiodes, and photovoltaic cells , 1993 .

[47]  H. Föll,et al.  Injection-level dependent series resistance: Comparison of CELLO and photoluminescence-based measurements , 2013 .

[48]  Jorge Morgado,et al.  Insoluble Patterns of Cross-Linkable Conjugated Polymers from Blend Demixing in Spin Cast Films , 2009 .

[49]  Mikkel Jørgensen,et al.  A self‐calibrating led‐based solar test platform , 2011 .

[50]  U. Würfel,et al.  Determining the photocurrent of individual cells within an organic solar module by LBIC and the filtering approach: Experiments and simulations , 2015 .

[51]  Mikkel Jørgensen,et al.  25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks , 2014, Advanced materials.

[52]  H. Föll,et al.  CELLO: an advanced LBIC measurement technique for solar cell local characterization , 2003 .