Short Communication) The Fabrication and Characterization of PZT Thin Film Acoustic Devices for Application in Underwater Robotic Systems

A high frequency spectrum lead zirconate titanate (PZT) thin film acoustic device was fabricated and studied for application using an underwater technique. The radio frequency (RF) planar magnetron sputtering method was used to deposit PZT thin film .The deposited PZT thin film IC (integrated circuits) fabrication processes were used to fabricate the acoustic devices. The optimized annealing conditions were 650oC and 20 min for PZT thin film deposited at 350oC for 2 h. The obtained PZT thin film had a dielectric constant of 869, a free dielectric constant e T 33 of about 893, a dielectric loss of 0.3, a concorcive electric field of 0.061 KV/cm, a piezoelectric constant d33 of 2.03 pm/V, a piezoelectric constant g33 = d33/e T 33 of 2.57 × 10 ‐4 vm/N and a polarization level of 112.5 nC/cm. The fabricated PZT thin film acoustic devices can be used as transmitters on receivers. The highest levels of transmission sensitivity and receiving sensitivity, which can be obtained, are 76 dB and ‐75 dB, respectively. The acoustic device has better performance when poled PZT thin film is used.

[1]  R. Castellano,et al.  Ion‐beam deposition of thin films of ferroelectric lead zirconate titanate (PZT) , 1979 .

[2]  Y. Sakashita,et al.  Dependence of electrical properties on film thickness in Pb(ZrxTi1−x)O3 thin films produced by metalorganic chemical vapor deposition , 1993 .

[3]  Joon-hoo Choi,et al.  Deposition behavior of Pb(ZrxTi1−x)O3 thin films by metalorganic chemical vapor deposition , 1993 .

[4]  F. Lévy,et al.  Properties of Pb(ZrxTi1−x)O3 thin films prepared by r.f. magnetron sputtering and heat treatment , 1990 .

[5]  J. Horwitz,et al.  Anion‐assisted pulsed laser deposition of lead zirconate titanate films , 1992 .

[6]  M. Sayer,et al.  rf planar magnetron sputtering and characterization of ferroelectric Pb(Zr,Ti)O3 films , 1983 .

[7]  A. Safari,et al.  Growth of epitaxial Pb(Zr,Ti)O3 films by pulsed laser deposition , 1992 .

[8]  Michael Sayer,et al.  Preparation of Pb(Zr,Ti)O3 thin films by sol gel processing: Electrical, optical, and electro‐optic properties , 1988 .

[9]  Kuniki Ohwada,et al.  Characterization of piezoelectric properties of PZT thin films deposited on Si by ECR sputtering , 1994 .

[10]  A. Okada.  Some electrical and optical properties of ferroelectric lead-zirconate-lead-titanate thin films , 1977 .

[11]  I. K. Naik,et al.  Observations of ferroelectric polarization reversal in sol‐gel processed very thin lead‐zirconate‐titanate films , 1990 .

[12]  K. Budd,et al.  Thin-film ferroelectrics of PZT of sol-gel processing , 1988, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  A. Okada.  Electrical properties of lead‐zirconate–lead‐titanate ferroelectric thin films and their composition analysis by Auger electron spectroscopy , 1978 .

[14]  L. E. Cross,et al.  Thickness-dependent electrical characteristics of lead zirconate titanate thin films , 1995 .

[15]  B. S. Kwak,et al.  Epitaxial lead zirconate‐titanate thin films on sapphire , 1993 .

[16]  S. Desu,et al.  Low‐temperature metalorganic chemical vapor deposition of perovskite Pb(ZrxTi1−x)O3 thin films , 1992 .

[17]  J. Horwitz,et al.  In situ deposition of epitaxial PbZrxTi(1−x)O3 thin films by pulsed laser deposition , 1991 .

[18]  Seshu B. Desu,et al.  Low temperature perovskite formation of lead zirconate titanate thin films by a seeding process , 1993 .