Microstructure and antioxidation performance of SiC-ZrO-MoSi 2 /Ni coated carbon fiber produced by composite electroplating

[1]  Xinghong Zhang,et al.  Ablation behavior of advanced TaSi 2 -based coating on carbon-bonded carbon fiber composite/ceramic insulation tile in plasma wind tunnel , 2018 .

[2]  Lai-fei Cheng,et al.  Improvement of the strength and toughness of carbon fiber/SiC composites via chemical vapor infiltration-grown SiC nanowire interphases , 2018 .

[3]  Lai-fei Cheng,et al.  Design and optimization of oxidation resistant coating for C/C aircraft brake materials , 2018 .

[4]  J. Kaleta,et al.  Improvement of Interaction in a Composite Structure by Using a Sol-Gel Functional Coating on Carbon Fibers , 2017, Materials.

[5]  Xinghong Zhang,et al.  Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2-SiC whisker and TaSi2-MoSi2-SiC whisker by slurry method , 2017 .

[6]  Wonoh Lee,et al.  Graphene/carbon nanotube hybrid as a multi-functional interfacial reinforcement for carbon fiber-reinforced composites , 2017 .

[7]  T. Troczynski,et al.  Comparative studies of the oxidation of MoSi2 based materials: Low-temperature oxidation (300–900 °C) , 2017 .

[8]  Lu Wang,et al.  Preparation of Continuous Al2O3/Y2O3 Coating on Carbon Fiber by a Novel Aqueous Plasma Electrolysis , 2017 .

[9]  L. Manocha,et al.  Deposition of silicon carbide interface coating on carbon fibre by PECVD for advanced composites , 2017 .

[10]  G. Logesh,et al.  Effect of temperature and gaseous medium on the evolved microstructures of carbon fiber reinforced reaction bonded silicon nitride composites , 2017 .

[11]  N. Park,et al.  A self-assembled flavin protective coating enhances the oxidative thermal stability of multi-walled carbon nanotubes , 2017 .

[12]  Yazheng Yang,et al.  Ablation behavior and mechanism of double-layer ZrB2-based ceramic coating for lightweight carbon-bonded carbon fiber composites under oxyacetylene flame at elevate temperature , 2017 .

[13]  Y. Xiang,et al.  Microstructure and oxidation protection of a MoSi2/SiO2-B2O3-Al2O3 coating for SiC-coated carbon/carbon composites , 2017 .

[14]  Ying Wang,et al.  Oxidation and thermal shock resistant properties of Si/Yb2SiO5/NdMgAl11O19 coating deposited on Cf/SiC composites , 2017 .

[15]  R. Machado,et al.  A novel PAN/silazane hybrid polymer for processing of carbon-based fibres with extraordinary oxidation resistance , 2017 .

[16]  Baosheng Xu,et al.  Microstructure and ablation behavior of double anti-oxidation protection for carbon-bonded carbon fiber composites , 2017 .

[17]  Jun Shen,et al.  Timing of polyethylene glycol addition for the control of SiO2 sol structure and sol–gel coating properties , 2017, Journal of Coatings Technology and Research.

[18]  K. Balani,et al.  Dual-Layer Oxidation-Protective Plasma-Sprayed SiC-ZrB2/Al2O3-Carbon Nanotube Coating on Graphite , 2017, Journal of Thermal Spray Technology.

[19]  M. Debili,et al.  NiO Formation by Simple Air Oxidation of Nickel Coated Carbon Fibers , 2016 .

[20]  Jianfeng Huang,et al.  Fabrication of gradient C/C-SiC-MoSi2 composites with enhanced ablation performance , 2016 .

[21]  Fen Wu,et al.  Preparation and oxidation behavior of a double-layer coating for three-dimensional braided carbon fiber , 2016 .

[22]  Zhihua Yang,et al.  Preparation and mechanical performance of ductile Csf/Al2O3–BN composites—Part 2: Effects of fiber contents and ablation properties , 2016 .

[23]  Hejun Li,et al.  Ablation behavior of rare earth La-modified ZrC coating for SiC-coated carbon/carbon composites under an oxyacetylene torch , 2016 .

[24]  Q. Fu,et al.  Supersonic plasma sprayed MoSi2–ZrB2 antioxidation coating for SiC–C/C composites , 2016 .

[25]  K. Rhee,et al.  Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites , 2015 .

[26]  Demeng Che,et al.  Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review , 2014 .

[27]  Hejun Li,et al.  Microstructure and ablation properties of carbon/carbon composites modified by ZrSiO4 , 2014 .

[28]  Chunxiang Lu,et al.  Preparation of anti-oxidative SiC/SiO2 coating on carbon fibers from vinyltriethoxysilane by sol–gel method , 2013 .

[29]  J. Schultz,et al.  Influence of an oxidation of the carbon fiber surface on the adhesion strength in carbon fiber-acrylate composites cured by electron beam , 2012 .