[1] Soil water flux is an important parameter in studies of runoff, infiltration, groundwater recharge, and subsurface chemical transport. Heat pulse sensors have been proposed as promising tools for measuring soil water fluxes. To date, heat pulse methods have required cumbersome mathematical analyses to calculate soil water flux from the measured data. We present a new mathematical analysis showing that a simple linear relationship exists between soil water flux and the natural log of the ratio of the temperature increase downstream from the line heat source to the temperature increase upstream from the line heat source. The simplicity of this relationship makes heat pulse sensors an attractive option for measuring soil water fluxes. In theory, this method is valid for fluxes with magnitudes between 10(-4) and 10(-7) m s(-1). The range of measurable fluxes is defined by temperature measurement resolution at the lower end and by the assumptions used in the analysis at the higher end.
[1]
Robert Horton,et al.
Determining Soil Water Flux and Pore Water Velocity by a Heat Pulse Technique
,
2000
.
[2]
R. Horton,et al.
Measurement of Soil Thermal Properties with a Dual‐Probe Heat‐Pulse Technique
,
1994
.
[3]
G. Byrne,et al.
A sensor for water flux in soil. “Point source” instrument
,
1967
.
[4]
D. Marshall.
Measurement of Sap Flow in Conifers by Heat Transport.
,
1958,
Plant physiology.
[5]
Keith L. Bristow,et al.
Error Analysis of the Heat Pulse Method for Measuring Soil Volumetric Heat Capacity
,
1993
.
[6]
Fred J. Molz,et al.
Laboratory Investigation and Analysis of a Ground‐Water Flowmeter
,
1985
.