Synthesis of Lumped Transmission-Line Analogs

Transmission lines and their lumped approximating networks have long been incorporated into radio-frequency power amplifiers to improve efficiency and shape circuit waveforms and are beginning to perform a similar roles in high-frequency switched-mode power electronics. Though lumped line-simulating networks are often preferred to their distributed exemplars for reasons of design flexibility and manufacturability, the impedance peaks and nulls of such lumped networks must be aligned in a precise, harmonic manner to minimize loss and symmetrize converter waveforms. This paper addresses the issue of harmonic frequency alignment in line-simulating networks, presenting new analytic results for predicting the impedance-minimum and impedance-maximum frequencies of networks in a ladder form. Two means of correcting for the observed harmonic misalignment in practical structures will be presented, corroborated by measurements of laminar structures built into the thickness of printed-circuit boards. These structures comprise inductances and capacitances whose dimensions are largely decoupled, such that the simulated line can be accurately analyzed and designed on a lumped basis. The presented techniques will be placed within a power-electronics setting by a representative application incorporating a lumped, line-simulating network.

[1]  Theodor F. Hueter,et al.  Sonics : techniques for the use of sound and ultrasound in engineering and science , 1955 .

[2]  David J. Perreault,et al.  Filters with active tuning for power applications , 2003 .

[3]  D. Perreault,et al.  Design Considerations for Very High Frequency dc-dc Converters , 2006 .

[4]  F. Raab.  Class-F power amplifiers with maximally flat waveforms , 1997 .

[5]  D.J. Perreault,et al.  Multi-resonant microfabricated inductors and transformers , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[6]  Kazuhiko Honjo,et al.  A simple circuit synthesis method for microwave class-F ultra-high-efficiency amplifiers with reactance-compensation circuits , 2000 .

[7]  E. Guillemin.  Synthesis of passive networks : theory and methods appropriate to the realization and approximation problems , 1957 .

[8]  Thomas H. Lee,et al.  The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES , 2003 .

[9]  Joshua W. Phinney,et al.  Multi-resonant passive components for power conversion , 2005 .

[10]  D.J. Perreault,et al.  Radio-Frequency Inverters With Transmission-Line Input Networks , 2006, IEEE Transactions on Power Electronics.

[11]  R. Gutmann,et al.  Power Combining in an Array of Microwave Power Rectifiers , 1979, 1979 IEEE MTT-S International Microwave Symposium Digest.

[12]  F. Raab.  Maximum efficiency and output of class-F power amplifiers , 2001 .

[13]  H. Zirath,et al.  L-band LDMOS power amplifiers based on an inverse class-F architecture , 2005, IEEE Transactions on Microwave Theory and Techniques.

[14]  Yehui Han,et al.  Resistance Compression Networks for Resonant Power Conversion , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[15]  Ernst A. Guillemin.  The classical theory of long lines, filters and related networks , 1935 .