Carbon nanotube-coated stainless steel mesh for enhanced oxygen reduction in biocathode microbial fuel cells

Abstract A novel carbon nanotubes (CNTs) coated stainless steel mesh (SSM) electrode has been fabricated by a simple and scalable process and is used as biocathode in microbial fuel cell (MFC) for performance improvement. Examination by scanning electron microscope shows that CNTs are uniformly distributed over the surface of the SSM, thus forming a three-dimensional network structure. The MFC with CNT-SSM biocathode achieves higher maximum power density (147 mW m −2 ), which is 49 times larger than that (3 mW m −2 ) produced from the MFC with bare SSM biocathode. Moreover, cyclic voltammetry shows that the microorganisms on the CNTs-SSM biocathode play a major role in oxygen reduction reaction (ORR), and the CNT-SSM biocathode performes better catalytic activity toward ORR than that of SSM biocathode. Additionally, the MFC with CNTs-SSM biocathode has higher Coulombic Efficiency than that of MFC with bare SSM biocathode. In this study, we demonstrate that the use of CNTs-SSM offers an effective mean to enhance the electricity of biocathode MFCs.

[1]  Yi Cui,et al.  Stretchable, porous, and conductive energy textiles. , 2010, Nano letters.

[2]  Yan Qiao,et al.  Electrocatalysis in microbial fuel cells—from electrode material to direct electrochemistry , 2010 .

[3]  Shungui Zhou,et al.  In situ formation of graphene/biofilm composites for enhanced oxygen reduction in biocathode microbial fuel cells , 2012 .

[4]  A. E. Greenberg,et al.  Standard Methods for the Examination of Water and Wastewater seventh edition , 2013 .

[5]  S. You,et al.  Power Generation and Electrochemical Analysis of Biocathode Microbial Fuel Cell Using Graphite Fibre Brush as Cathode Material , 2009 .

[6]  Xie Quan,et al.  Electron transfer mechanisms, new applications, and performance of biocathode microbial fuel cells. , 2011, Bioresource technology.

[7]  Hanqing Yu,et al.  Carbon nanotube/chitosan nanocomposite as a biocompatible biocathode material to enhance the electricity generation of a microbial fuel cell , 2011 .

[8]  Han-Qing Yu,et al.  Development of a novel bioelectrochemical membrane reactor for wastewater treatment. , 2011, Environmental science & technology.

[9]  L. T. Angenent,et al.  Application of Bacterial Biocathodes in Microbial Fuel Cells , 2006 .

[10]  Uwe Schröder,et al.  Application of pyrolysed iron(II) phthalocyanine and CoTMPP based oxygen reduction catalysts as cathode materials in microbial fuel cells , 2005 .

[11]  Yongyou Hu,et al.  Manganese dioxide-coated carbon nanotubes as an improved cathodic catalyst for oxygen reduction in a , 2011 .

[12]  Peng Liang,et al.  Use of inexpensive semicoke and activated carbon as biocathode in microbial fuel cells. , 2011, Bioresource technology.

[13]  Largus T Angenent,et al.  Cathodes as electron donors for microbial metabolism: which extracellular electron transfer mechanisms are involved? , 2011, Bioresource technology.

[14]  Jian Sun,et al.  Performance improvement of air-cathode single-chamber microbial fuel cell using a mesoporous carbon , 2011 .

[15]  Derek R. Lovley,et al.  Bug juice: harvesting electricity with microorganisms , 2006, Nature Reviews Microbiology.

[16]  Willy Verstraete,et al.  Evaluation of biocathodes in freshwater and brackish sediment microbial fuel cells , 2010, Applied Microbiology and Biotechnology.

[17]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[18]  Claire Dumas,et al.  Marine microbial fuel cell: Use of stainless steel electrodes as anode and cathode materials , 2007 .

[19]  H. May,et al.  Electrochemical evidence of direct electrode reduction by a thermophilic Gram-positive bacterium, Thermincola ferriacetica , 2009 .