Insights into Stress Corrosion Cracking in Scratched Area of Alloy 690TT Steam Generator Tubes

[1]  Jianqiu Wang,et al.  Stress corrosion behavior of scratched Alloy 690TT steam generator tube in chlorine‐containing high‐temperature pressurized water , 2022, Materials and Corrosion.

[2]  Bin Wu,et al.  Microstructure and stress corrosion cracking behavior of Alloy 690TT steam generator tubes with internal bulge defect , 2022, Journal of Nuclear Materials.

[3]  E. Han,et al.  Effects of surface grinding for scratched alloy 690TT tube in PWR nuclear power plant: Microstructure and stress corrosion cracking , 2022, Journal of Materials Science & Technology.

[4]  J. Xie,et al.  The intergranular oxidation behavior of low-angle grain boundary of alloy 600 in simulated pressurized water reactor primary water , 2021, Acta Materialia.

[5]  E. Han,et al.  Effect of surface scratch depth on microstructure change and stress corrosion cracking behavior of alloy 690TT steam generator tube , 2021 .

[6]  P. Withers,et al.  On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690 , 2021, Acta Materialia.

[7]  T. Shoji,et al.  Insights into the SCC crack tip of Alloy 690TT in caustic solution at high temperature , 2021 .

[8]  E. Han,et al.  Nodular corrosion inside the crevice of Alloy 690 in deaerated high-temperature chloride solution , 2021 .

[9]  Tingguang Liu,et al.  Size effect of scratches on the degradation behavior of alloy 690TT in high temperature caustic solution , 2021 .

[10]  D. Liang,et al.  A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel , 2020, Acta Materialia.

[11]  Wenjun Kuang,et al.  Insight into the acceleration in oxidation kinetics ahead of stress corrosion crack of alloy 690 in simulated PWR primary water , 2020 .

[12]  Tingguang Liu,et al.  Oxide properties of deformed Alloy 690TT in caustic solution at high temperature , 2020 .

[13]  Kai Chen,et al.  Microstructural investigation of the nodular corrosion of 304NG stainless steel in supercritical water , 2020, Corrosion Science.

[14]  Kai Chen,et al.  Effect of intergranular carbides on the cracking behavior of cold worked alloy 690 in subcritical and supercritical water , 2020 .

[15]  G. Was,et al.  A high-resolution characterization of the initiation of stress corrosion crack in Alloy 690 in simulated pressurized water reactor primary water , 2020 .

[16]  D. C. Johnson,et al.  Quantitative linkage between the stress at dislocation channel – Grain boundary interaction sites and irradiation assisted stress corrosion crack initiation , 2019, Acta Materialia.

[17]  Kai Chen,et al.  Characterization of the crack initiation and propagation in Alloy 600 with a cold-worked surface , 2019, Corrosion Science.

[18]  M. G. Burke,et al.  Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water , 2019, Acta Materialia.

[19]  K. Arioka,et al.  Mechanistic understanding of the temperature dependence of crack growth rate in alloy 600 and 316 stainless steel through high-resolution characterization , 2019, Acta Materialia.

[20]  W. Shuai,et al.  Crack Growth Driving Force at Tip of Stress Corrosion Cracking in Nuclear Structural Materials at Initial Stage , 2018, Rare Metal Materials and Engineering.

[21]  G. Was,et al.  Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining , 2018, Acta Materialia.

[22]  Yang Fuqiang,et al.  Analysis on Crack Driving Force at Stress Corrosion Cracking Tip Induced by Scratch in Nickel-based Alloy , 2018 .

[23]  M. Olszta,et al.  Grain boundary selective oxidation and intergranular stress corrosion crack growth of high-purity nickel binary alloys in high-temperature hydrogenated water , 2018 .

[24]  G. Was,et al.  Stress corrosion crack initiation in Alloy 690 in high temperature water , 2018 .

[25]  G. Was,et al.  The oxidation of alloy 690 in simulated pressurized water reactor primary water , 2017 .

[26]  Masashi Watanabe,et al.  A Mechanistic Study of Stress Corrosion Crack Propagation in Heavily Cold Worked TT Alloy 690 Exposed to Simulated PWR Primary Water , 2017 .

[27]  M. G. Burke,et al.  Using Modern Microscopy to “Fingerprint” Secondary Side SCC in Ni–Fe Alloys , 2017 .

[28]  Cheunsoon Ahn,et al.  Research on the Characteristics of Skin Color of Age 25-35 Females of Korea, China, and Vietnam , 2017 .

[29]  S. Bruemmer,et al.  Precursor Evolution and Stress Corrosion Cracking Initiation of Cold-Worked Alloy 690 in Simulated Pressurized Water Reactor Primary Water , 2017 .

[30]  Jian Lu,et al.  Effects of surface nanocrystallization on the corrosion behaviors of 316L and alloy 690 , 2017 .

[31]  K. Arioka,et al.  Rapid nickel diffusion in cold-worked carbon steel at 320–450 °C , 2015 .

[32]  Y. Takeda,et al.  Characterization of microstructure, local deformation and microchemistry in Alloy 690 heat-affected zone and stress corrosion cracking in high temperature water , 2015 .

[33]  G. Was,et al.  The effects of grain boundary carbide density and strain rate on the stress corrosion cracking behavior of cold rolled Alloy 690 , 2015 .

[34]  Steven J. Zinkle,et al.  Materials Challenges in Nuclear Energy , 2013 .

[35]  E. Han,et al.  Environmentally assisted crack growth in one-dimensionally cold worked Alloy 690TT in primary water , 2012 .

[36]  E. Han,et al.  Influence of Zn on oxide films on Alloy 690 in borated and lithiated high temperature water , 2011 .

[37]  Yu Jian-qiu,et al.  MICROSTRUCTURE NEAR SCRATCH ON ALLOY 690TT AND STRESS CORROSION INDUCED BY SCRATCHING , 2011 .

[38]  T. Terachi,et al.  Dependence of Stress Corrosion Cracking of Alloy 690 on Temperature, Cold Work, and Carbide Precipitation—Role of Diffusion of Vacancies at Crack Tips , 2011 .

[39]  E. Han,et al.  Localized corrosion behavior of scratches on nickel-base Alloy 690TT , 2011 .

[40]  E. Han,et al.  Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments , 2010 .

[41]  E. Han,et al.  Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments , 2009 .

[42]  E. Han,et al.  Effects of scratching on corrosion and stress corrosion cracking of Alloy 690TT at 58 C and 330 C , 2009 .

[43]  Peter L. Andresen,et al.  IGSCC of non-sensitized stainless steels in high temperature water , 2008 .

[44]  H. W. Liu.  A unified model of environment-assisted cracking , 2008 .

[45]  G. Subhash,et al.  Scratch-induced microplasticity and microcracking in zirconium diboride-silicon carbide composite , 2008 .

[46]  Seiya Yamazaki,et al.  The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water , 2008 .

[47]  Y. Zhou,et al.  Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air , 2005 .

[48]  T. Terachi,et al.  Microstructural Characterization of SCC Crack Tip and Oxide Film for SUS 316 Stainless Steel in Simulated PWR Primary Water at 320°C , 2005 .

[49]  Jian Lu,et al.  Grain refinement at the nanoscale via mechanical twinning and dislocation interaction in a nickel-based alloy , 2004 .

[50]  J. A. Gorman,et al.  Quantitative Assessment of Submodes of Stress Corrosion Cracking on the Secondary Side of Steam Generator Tubing in Pressurized Water Reactors: Part 1 , 2003 .

[51]  Gang Liu,et al.  Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment , 2003 .

[52]  L. E. Thomas,et al.  High-Resolution Characterization of Intergranular Attack and Stress Corrosion Cracking of Alloy 600 in High-Temperature Primary Water , 2000 .

[53]  G. Was,et al.  Isolation of carbon and grain boundary carbide effects on the creep and intergranular stress corrosion cracking behavior of Ni−16Cr−9Fe−xC alloys in 360 °C primary water , 1998 .

[54]  G. Gray,et al.  Microband formation in shock-loaded and quasi-statically deformed metals , 1989 .

[55]  Peter L. Andresen,et al.  Life prediction by mechanistic modeling and system monitoring of environmental cracking of iron and nickel alloys in aqueous systems , 1988 .

[56]  G. Gray.  Deformation twinning in Al-4.8 wt% Mg , 1988 .

[57]  G. P. Airey,et al.  The Effect of Carbon Content and Thermal Treatment on the SCC Behavior of Inconel Alloy 600 Steam Generator Tubing , 1979 .

[58]  S. Floreen,et al.  The relationship between microstructure, deformation behavior, and stress corrosion cracking resistance of an age-hardened Ni-base alloy , 1977 .

[59]  Wenjun Kuang,et al.  Grain Boundary Oxidation Behavior of Ni15Cr Alloy in High Temperature Carbon Dioxide , 2022, SSRN Electronic Journal.

[60]  G. Was,et al.  The effect of grain boundary structure on the intergranular degradation behavior of solution annealed alloy 690 in high temperature, hydrogenated water , 2020 .

[61]  R. Staehle.  Historical views on stress corrosion cracking of nickel-based alloys: The Coriou effect , 2016 .

[62]  Y. Aoyagi,et al.  Crystal Plasticity Simulation Considering Oxidation along Grain Boundary and Effect of Grain Size on Stress Corrosion Cracking , 2012 .

[63]  Y. Takeda,et al.  Deformation Mode and Microstructure on Stress Corrosion Cracking Path and Kinetics in High Temperature Water Environments , 2011 .

[64]  G. Gray,et al.  Orientation dependence of shock-induced twinning and substructures in a copper bicrystal , 2010 .