Determination of particular singular configurations of Stewart platform type of fixator by the stereographic projection method

Hexapod-type external fixators based on a general 6-6 Stewart platform structure are extensively used to manage orthopaedic disorders. While implementing these robotic devices, a practical visual aid is needed to quickly identify their uncontrollable states referred to as singularities. Thus, a visible correlation between the singularity of hexapod-type external fixators and their particular configurations has been explored geometrically in this work. A novel method called stereographic projection is utilized for that purpose. A mathematical procedure has been established to determine the characteristic values of the singular states. It is found that in case four- out of six-rod directions intersect each other at a common point, two different singular robot configurations result. Besides, if four joint angles at the top and bottom rings of the hexapod are equal, rings being parallel, then five-rod directions are intersected by two lines each passing through the end joints of the fifth rod.

[1]  Ibrahim Deniz Akcali,et al.  A graphical user interface for an external fixation system , 2014, IEEE-EMBS International Conference on Biomedical and Health Informatics (BHI).

[2]  Boris Mayer St-Onge,et al.  Singularity Analysis and Representation of the General Gough-Stewart Platform , 2000, Int. J. Robotics Res..

[3]  Serdar Kucuk,et al.  Dexterous Workspace Optimization for a New Hybrid Parallel Robot Manipulator , 2018, Journal of Mechanisms and Robotics.

[4]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[5]  T. Mruthyunjaya,et al.  Force redundancy in parallel manipulators: Theoretical and practical issues , 1998 .

[6]  Turgay Ibrikci,et al.  A Mathematical Model in the Implementation of a Stewart-Gough Platform as an External Fixator , 2009 .

[7]  Hüseyin Mutlu,et al.  Direct Kinematics for a Novel Robotic System Used as External Fixator , 2018, 2018 WRC Symposium on Advanced Robotics and Automation (WRC SARA).

[8]  Jerrold E. Marsden,et al.  Basic Complex Analysis , 1973 .

[9]  Pedro Araujo-Gómez,et al.  Design of a 3-UPS-RPU Parallel Robot for Knee Diagnosis and Rehabilitation , 2016 .

[10]  Amber L. Simpson,et al.  Computer‐assisted distraction osteogenesis by Ilizarov's method , 2008, The international journal of medical robotics + computer assisted surgery : MRCAS.

[11]  Serdar Kucuk,et al.  A novel kinematic design, analysis and simulation tool for general Stewart platforms , 2013, Simul..

[12]  G. Pólya,et al.  Functions of One Complex Variable , 1998 .

[13]  H. Mutlu,et al.  A Mathematical Model for the Use of a Gough-Stewart Platform Mechanism as a Fixator , 2006 .

[14]  Xiu Ting Wei,et al.  Singularity Elimination of Parallel Mechanism by Redundant Actuations , 2011 .

[15]  I. D. Akcali,et al.  Singularity analysis of a fixator by closest points approach , 2015, 2015 Medical Technologies National Conference (TIPTEKNO).

[16]  I. D. Akcali,et al.  Displacement analysis of robotic frames for reliable and versatile use as external fixator , 2014, The 4th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent.

[17]  Ibrahim Deniz Akcali,et al.  Lambda Fixator: A Novel Robotic System in Orthopedics , 2019, 2019 4th International Conference on Control, Robotics and Cybernetics (CRC).

[18]  Hüseyin Mutlu,et al.  A Novel Approach in the Direct Kinematics of Stewart Platform Mechanisms with Planar Platforms , 2006 .

[19]  A Aydin,et al.  A hybrid image processing system for X-ray images of an external fixator , 2012, Computer methods in biomechanics and biomedical engineering.

[20]  Dror Paley,et al.  History and Science Behind the Six-Axis Correction External Fixation Devices in Orthopaedic Surgery , 2011 .

[21]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[22]  N Weinrich,et al.  A hexapod robot external fixator for computer assisted fracture reduction and deformity correction , 2004, The international journal of medical robotics + computer assisted surgery : MRCAS.

[23]  Soheil Zarkandi,et al.  A new geometric method for singularity analysis of spherical mechanisms , 2011, Robotica.

[24]  James E. pLebensohn.  Geometry and the Imagination , 1952 .

[25]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[26]  E. T..  The Stereographic Projection , 1941, Nature.

[27]  A. Bieliński,et al.  Construction of straight line intersecting four given straight lines , 2008 .

[28]  Jorge Angeles,et al.  Architecture singularities of platform manipulators , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[29]  Jingli Du,et al.  Elimination of force singularity of the cable and cabin structure for the next generation large radio telescope , 2002 .

[30]  Hassan Zohoor,et al.  Singularity Analysis of a 3DOF Parallel Manipulator Using Infinite Constraint Plane Method , 2008, J. Intell. Robotic Syst..