Damage and fracture of dual-phase steels: Influence of martensite volume fraction

[1]  H. Suzuki,et al.  An effect of the second phase morphology on the tensile fracture characteristics of carbon steels , 1975 .

[2]  J. Im,et al.  Cavity formation from inclusions in ductile fracture , 1975 .

[3]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[4]  M. S. Rashid.  Dual Phase Steels , 1981 .

[5]  G. Thomas,et al.  Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel , 1981 .

[6]  P. Uggowitzer,et al.  The tensile fracture of ferritic-martensitic carbon steels , 1982 .

[7]  J. Gurland,et al.  A Study of the Deformation and Fracture of a Dual-Phase Steel , 1982 .

[8]  A. Marder.  Deformation characteristics of dual-phase steels , 1982 .

[9]  W. S. Owen,et al.  The dependence of some tensile and fatigue properties of a dual-phase steel on its microstructure , 1985 .

[10]  George Krauss,et al.  Void formation during tensile testing of dual phase steels , 1988 .

[11]  H. Exner.  CHAPTER 10 – QUALITATIVE AND QUANTITATIVE SURFACE MICROSCOPY , 1996 .

[12]  Wolfgang Bleck,et al.  Cold-rolled, high-strength sheet steels for auto applications , 1996 .

[13]  James A. Nemes,et al.  Micromechanical modeling of dual phase steels , 2003 .

[14]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[15]  E. Maire,et al.  On the competition between particle fracture and particle decohesion in metal matrix composites , 2004 .

[16]  J. Nemes,et al.  Characterizing DP-steels using micromechanical modeling of cells , 2007 .

[17]  Mohammad Mazinani,et al.  Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel , 2007 .

[18]  A. Pineau,et al.  2.06 – Failure of Metals , 2007 .

[19]  E. Maire,et al.  Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography , 2008 .

[20]  David S. Wilkinson,et al.  Effect of martensite distribution on damage behaviour in DP600 dual phase steels , 2009 .

[21]  K. S. Choi,et al.  Influence of Martensite Mechanical Properties on Failure Mode and Ductility of Dual-Phase Steels , 2009 .

[22]  K. S. Choi,et al.  On key factors influencing ductile fractures of dual phase (DP) steels , 2009 .

[23]  D. Wilkinson,et al.  Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing , 2009 .

[24]  E. Maire,et al.  Modelling the competition between interface debonding and particle fracture using a plastic strain dependent cohesive zone , 2010 .

[25]  Jpm Johan Hoefnagels,et al.  Microstructural banding effects clarified through micrographic digital image correlation , 2010 .

[26]  Olivier Bouaziz,et al.  Characterization and modeling of void nucleation by interface decohesion in dual phase steels , 2010 .

[27]  Saeed Ziaei-Rad,et al.  A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model , 2011 .

[28]  A. Butz,et al.  Mechanisms of void formation during tensile testing in a commercial, dual-phase steel , 2011 .

[29]  Dierk Raabe,et al.  Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging , 2011 .

[30]  E. Maire,et al.  Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels , 2011 .

[31]  P. Cloetens,et al.  Resolution effect on the study of ductile damage using synchrotron X-ray tomography , 2012 .

[32]  Mgd Marc Geers,et al.  Author ' s personal copy Identification of the continuum damage parameter : An experimental challenge in modeling damage evolution , 2012 .

[33]  Wolfgang Bleck,et al.  A micromechanical damage simulation of dual phase steels using XFEM , 2012 .

[34]  O. Bouaziz,et al.  Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications , 2013 .

[35]  Y. Bréchet,et al.  Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems , 2013 .

[36]  C. Pinna,et al.  Failure mechanisms in DP600 steel: Initiation, evolution and fracture , 2013 .

[37]  E. Maire,et al.  Experimental investigation of void coalescence in a dual phase steel using X-ray tomography , 2013 .

[38]  O. Bouaziz,et al.  Mechanical behavior of a compositionally graded 300M steel , 2013 .

[39]  O. Bouaziz,et al.  The influence of microstructure and composition on the plastic behaviour of dual-phase steels , 2014 .

[40]  Toshihiro Tsuchiyama,et al.  Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel , 2014 .

[41]  O. Bouaziz,et al.  Microstructure refinement of dual-phase steels with 3.5 wt% Mn : influence on plastic and fracture behavior , 2015 .