The closure condition of the double banana and its application to robot position analysis

A double banana is defined as the bar-and-joint assembly of two bipyramids joined by their apexes. Clearly, the bar lengths of this kind of assembly are not independent as we cannot assign arbitrary values to them. This dependency can be algebraically expressed as a closure condition fully expressed in terms of bar lengths. This paper is devoted to its derivation and to show how its use simplifies the position analysis of many well-known serial and parallel robots thus providing a unifying treatment to apparently disparate problems. This approach permits deriving the univariate polynomials, needed for the closed-form solution of these position analysis problems, without relying on trigonometric substitutions or difficult variable eliminations.

[1]  C. Innocenti,et al.  Direct Kinematics of the 6-4 Fully Parallel Manipulator with Position and Orientation Uncoupled , 1992 .

[2]  J. Michael McCarthy,et al.  21st Century Kinematics , 2013 .

[3]  Georg Nawratil.  Review and Recent Results on Stewart Gough Platforms with Self-Motions , 2012 .

[4]  Hüseyin Mutlu,et al.  A Novel Approach in the Direct Kinematics of Stewart Platform Mechanisms with Planar Platforms , 2006 .

[5]  Federico Thomas,et al.  INVERSE KINEMATICS BY DISTANCE MATRIX COMPLETION , 2005 .

[6]  Federico Thomas,et al.  Revisiting trilateration for robot localization , 2005, IEEE Transactions on Robotics.

[7]  Federico Thomas,et al.  On the Trilaterable Six-Degree-of-Freedom Parallel and Serial Manipulators , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[8]  J. Duffy,et al.  A forward displacement analysis of a class of stewart platforms , 1989, J. Field Robotics.

[9]  J. Faugère,et al.  Combinatorial classes of parallel manipulators , 1995 .

[10]  Carlo Innocenti,et al.  Direct position analysis of the Stewart platform mechanism , 1990 .

[11]  Karl Wohlhart,et al.  Displacement analysis of the general spherical Stewart platform , 1994 .

[12]  James Nielsen,et al.  On the Kinematic Analysis of Robotic Mechanisms , 1999, Int. J. Robotics Res..

[13]  Damien Chablat,et al.  Kinematic Analysis of a Family of 3R Manipulators , 2007, ArXiv.

[14]  David R. Smith,et al.  Higher order singularities of regional manipulators , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[15]  B. Servatius,et al.  Generic and Abstract Rigidity , 2002 .

[16]  Kenneth J. Waldron,et al.  Direct kinematic solution of a Stewart platform , 1990, IEEE Trans. Robotics Autom..

[17]  David R. Smith,et al.  Analysis of fourth order manipulator kinematics using conic sections , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[18]  Karl Menger,et al.  New Foundation of Euclidean Geometry , 1931 .

[19]  Raffaele Di Gregorio.  Kinematics of the 3-UPU wrist , 2003 .

[20]  Kenneth J. Waldron,et al.  Direct Position Kinematics of the 3-1-1-1 Stewart Platforms , 1994 .

[21]  Donald Lee Pieper.  The kinematics of manipulators under computer control , 1968 .

[22]  Timothy F. Havel.  Some Examples of the Use of Distances as Coordinates for Euclidean Geometry , 1991, J. Symb. Comput..

[23]  Sebti Foufou,et al.  Using Cayley-Menger determinants for geometric constraint solving , 2004, SM '04.