Ripple free fault tolerant control of five phase permanent magnet machines

This study is dealt with fault tolerant control of five phase permanent magnet (PM) machines. The main objectives are to increase the output power while eliminating the generated torque ripples. As a new aspect, the effect of available neutral connection is evaluated on the output power and torque ripples.

[1]  Demba Diallo,et al.  A fault-tolerant control architecture for induction motor drives in automotive applications , 2004, IEEE Transactions on Vehicular Technology.

[2]  Bruno Dehez,et al.  Torque Control Strategy of Polyphase Permanent-Magnet Synchronous Machines With Minimal Controller Reconfiguration Under Open-Circuit Fault of One Phase , 2012, IEEE Transactions on Industrial Electronics.

[3]  Hamid A. Toliyat,et al.  Fault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications , 2007, IEEE Transactions on Vehicular Technology.

[4]  Kais Atallah,et al.  Effect of optimal torque control on rotor loss of fault tolerant permanent magnet brushless machines , 2002 .

[5]  Seung-Ki Sul,et al.  Analysis of multiphase space vector pulse width modulation based on multiple d-q spaces concept , 2005, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[6]  Leila Parsa,et al.  An Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults , 2008, IEEE Transactions on Industrial Electronics.

[7]  J. Cusido,et al.  Reliable electro-mechanical actuators in aircraft , 2008, IEEE Aerospace and Electronic Systems Magazine.

[8]  Kais Atallah,et al.  Torque ripple minimisation in modular permanent magnet brushless machines , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[9]  John Chiasson,et al.  Modeling and High Performance Control of Electric Machines , 2005 .

[10]  S.E. Schulz,et al.  Fault detection and fault-tolerant control of interior permanent-magnet motor drive system for electric vehicle , 2003, IEEE Transactions on Industry Applications.

[11]  N. Bianchi,et al.  Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor , 2007, IEEE Transactions on Industry Applications.

[12]  Marco Villani,et al.  High Reliability Permanent Magnet Brushless Motor Drive for Aircraft Application , 2012, IEEE Transactions on Industrial Electronics.

[13]  K. Atallah,et al.  Optimal torque control of fault-tolerant permanent magnet brushless machines , 2005, Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401).

[14]  Drazen Dujic,et al.  A Space Vector PWM Scheme for Multifrequency Output Voltage Generation With Multiphase Voltage-Source Inverters , 2008, IEEE Transactions on Industrial Electronics.

[15]  K. Atallah,et al.  Torque-ripple minimization in modular permanent-magnet brushless machines , 2003 .

[16]  Sergio L. Toral Marín,et al.  Comparative Analysis of Discontinuous and Continuous PWM Techniques in VSI-Fed Five-Phase Induction Motor , 2011, IEEE Transactions on Industrial Electronics.

[17]  Seung-Ki Sul,et al.  Analysis of multiphase space vector pulse-width modulation based on multiple d-q spaces concept , 2005, IEEE Transactions on Power Electronics.