Recent attention to impulse antenna phased arrays has necessitated the need to develop a reliable high voltage, high repetition rate switch that will operate with ultra low jitter. The ideal jitter of such a switch would be a small fraction of the risetime in order to synchronize the array to steer and preserve the risetime of the radiated pulse. This paper presents the impact, gases and gas mixtures have on switch performance which includes recovery rate and in particular, jitter. A 50 Ω, 1 nF pulse forming line is charged to 30 kV and provides the low inductance voltage source to test the different gases. Triggering is provided by an SOS voltage source that supplies ≫100 kV, 10 ns risetime pulses at a rep rate up to 1 kHz in burst mode. A hermetically sealed spark gap with a Kel-F lining is used to house the switch and high pressure gas. The system contains a high pressure gas mixing chamber that can mix various gases up to 2000 psi. Gases tested include dry air, H2, N2, and SF6.
[1]
William D. Prather,et al.
Development of a hermetically sealed, high-energy trigatron switch for high repetition rate applications
,
2000
.
[2]
T. H. Martin,et al.
An empirical formula for gas switch breakdown delay
,
1989,
7th Pulsed Power Conference.
[3]
J. Walter,et al.
Modeling of a Single Element Pulsed Ring-Down Antenna for Implementation in a Phased Array System
,
2007,
2007 IEEE 34th International Conference on Plasma Science (ICOPS).
[4]
J. Walter,et al.
Theoretical pulsed ring down antenna array performance
,
2007,
2007 16th IEEE International Pulsed Power Conference.
[5]
C. James,et al.
Evaluation of Switch Jitter on a High Pressure Coaxial Spark Gap
,
2007,
2007 IEEE 34th International Conference on Plasma Science (ICOPS).