Combined Plasma-Based Fiber Etching and Diamond-Like Carbon Nanooverlay Deposition for Enhancing Sensitivity of Long-Period Gratings

This paper presents an application of reactive ion etching followed by diamond-like carbon nanooverlay deposition using radio frequency plasma-enhanced chemical vapor deposition method for effective tuning of the refractive index (RI) sensitivity of long-period gratings (LPGs). Both etching and deposition take place within one process. Combination of both plasma-based processes allows for well-controlled tuning of the LPG sensorial response up to its operation at both dispersion turning point of higher order cladding modes and mode transition regime. As a result of the processing, the RI sensitivity has been enhanced up to over 12 000 nm/RIU per single resonance in narrow RI range (1.3344-1.3355 RIU) and over 2000 nm/RIU in broader RI range (1.34-1.356 RIU). Experimental results have been supported by numerical analyses that show capabilities for further significant improvement of both RI sensitivity and range of RI measured with the enhanced sensitivity.

[1]  Wojtek J. Bock,et al.  Detection of bacteria using bacteriophages as recognition elements immobilized on long-period fiber gratings. , 2011, Optics express.

[2]  W. J. Bock,et al.  Tuned Pressure Sensitivity of Dual Resonant Long-Period Gratings Written in Boron Co-Doped Optical Fiber , 2012, Journal of Lightwave Technology.

[3]  Wojtek J. Bock,et al.  Recognition of bacterial lipopolysaccharide using bacteriophage-adhesin-coated long-period gratings. , 2015, Biosensors & bioelectronics.

[4]  W. Bock,et al.  Improved diamond‐like carbon coating deposition uniformity on cylindrical sample by its suspension in RF PECVD chamber , 2015 .

[5]  Ignacio Del Villar,et al.  Ultrahigh-sensitivity sensors based on thin-film coated long period gratings with reduced diameter, in transition mode and near the dispersion turning point , 2015 .

[6]  W. Bock,et al.  Properties of diamond‐like carbon nano‐coating deposited with RF PECVD method on UV‐induced long‐period fibre gratings , 2014 .

[7]  J. Robertson.  Diamond-like amorphous carbon , 2002 .

[8]  Predrag Mikulic,et al.  Measurements of reactive ion etching process effect using long-period fiber gratings. , 2014, Optics express.

[9]  Wojtek J. Bock,et al.  Application of diamond-like carbon films in optical fibre sensors based on long-period gratings , 2007 .

[10]  Wojtek J. Bock,et al.  Tuning properties of long-period gratings by plasma post-processing of their diamond-like carbon nano-overlays , 2014 .

[11]  Ian Bennion,et al.  Sensitivity characteristics of long-period fiber gratings , 2002 .

[12]  Predrag Mikulic,et al.  Label-free sensitivity of long-period gratings enhanced by atomic layer deposited TiO(2) nano-overlays. , 2015, Optics express.

[13]  Wojtek J. Bock,et al.  Enhancing sensitivity of long-period gratings by combined fiber etching and diamond-like carbon nano-overlay deposition , 2015, International Conference on Optical Fibre Sensors.

[14]  J. Judkins,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[15]  Philippe Lalanne,et al.  Optimization of sensitivity in Long Period Fiber Gratings with overlay deposition. , 2005, Optics Express.

[16]  Cosimo Trono,et al.  Giant sensitivity of long period gratings in transition mode near the dispersion turning point: an integrated design approach. , 2012, Optics letters.