A universal topology based on buck-boost converter with optimal resistive impedance tracking for energy harvesters in battery powered applications

This paper presents a universal topology based on buck-boost converter for energy harvesters used in battery powered applications. This topology can operate with both dc and ac harvesters and provides optimal resistive impedance tracking feature to allow for maximizing harvested energy. The ac-dc conversion is done in a single stage without utilizing a bridge rectifier at the input, unlike the conventional topologies for energy harvesting. That results in reducing voltage drop and power losses enabling the topology to be used with relatively low-voltage harvesters without increasing system complexity related to using synchronous bridge rectifiers. Also, bias supply scheme and gate drives needed with this topology are discussed and shown in this paper. Experimental results show the capability of the topology to operate with 50 Hz, 1.2V electromagnetic harvester with 6–7Ω optimal resistive impedance and provide perfect matching as desired at different battery voltage levels changing from 3.7V to 12V. The topology, with off-shelf discrete components, achieves efficiencies between 70–80% depending on cells' voltages which is comparable to the state of the art approaches that run at the same conditions, can work only with dc harvesters and do not provide impedance matching.

[1]  D.P. Arnold,et al.  Review of Microscale Magnetic Power Generation , 2007, IEEE Transactions on Magnetics.

[2]  Steven D. Pekarek,et al.  Modeling air-core permanent-magnet linear generators in free-rotating devices , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[3]  Aleksandar Prodic,et al.  Assisting converter based integrated battery management system for low power applications , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[4]  X. D. Xie,et al.  Energy harvesting from a vehicle suspension system , 2015 .

[5]  D. Inman,et al.  Resistive Impedance Matching Circuit for Piezoelectric Energy Harvesting , 2010 .

[6]  L. Zuo,et al.  Energy-harvesting shock absorber with a mechanical motion rectifier , 2013 .

[7]  Hua Yu,et al.  A Vibration-Based MEMS Piezoelectric Energy Harvester and Power Conditioning Circuit , 2014, Sensors.

[8]  J. M. Damaschke.  Design of a low-input-voltage converter for thermoelectric generator , 1997 .

[9]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[10]  Joseph A. Paradiso,et al.  Energy scavenging for mobile and wireless electronics , 2005, IEEE Pervasive Computing.

[11]  Tao Xie,et al.  Analyses of impedance matching for piezoelectric energy harvester with a resistive circuit , 2011, Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology.

[12]  Dong Sam Ha,et al.  A self-powered power management circuit for energy harvested by a piezoelectric cantilever , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[13]  Lun-De Liao,et al.  A Miniaturized Electromagnetic Generator With Planar Coils and Its Energy Harvest Circuit , 2009, IEEE Transactions on Magnetics.