Modeling, Analysis, and Control of an Actively Reconfigurable Planetary Rover for Traversing Slopes Covered with Loose Soil

Future planetary rovers are expected to probe across steep sandy slopes such as crater rims where wheel slippage can be a critical problem. One possible solution is to equip locomotion mechanisms with redundant actuators so that the rovers are able to actively reconfigure themselves to adapt to the target terrain. This study modeled a reconfigurable rover to analyze the effects of posture change on rover slippage over sandy slopes. The study also investigated control strategies for a reconfigurable rover to reduce slippage. The proposed mechanical model consists of two models: a complete rover model representing the relationship between the attitude of the rover and the forces acting on each wheel, and a wheel-soil contact force model expressed as a function of slip parameters. By combining these two models, the proposed joint model relates the configuration of the rover to its slippage. The reliability of the proposed model is discussed based on a comparison of slope-traversing experiments and numerical simulations. The results of the simulations show trends similar to those of the experiments and thus the validity of the proposed model. Following the results, a configuration control strategy for a reconfigurable rover was introduced accompanied by orientation control. These controls were implemented on a four-wheeled rover, and their effectiveness was tested on a natural sand dune. The results of the field experiments show the usefulness of the proposed control strategies.

[1]  David Wettergreen,et al.  Design and field experimentation of a prototype Lunar prospector , 2010, Int. J. Robotics Res..

[2]  Frank Kirchner,et al.  Locomotion modes for a hybrid wheeled-leg planetary rover , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[3]  Karl Iagnemma,et al.  Self‐supervised terrain classification for planetary surface exploration rovers , 2012, J. Field Robotics.

[4]  J Y Wong,et al.  A general theory for skid steering of tracked vehicles on firm ground , 2001 .

[5]  Kenji Nagaoka,et al.  Slope traversability analysis of reconfigurable planetary rovers , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  A. R. Reece.  Principles of Soil-Vehicle Mechanics , 1965 .

[7]  David Wettergreen,et al.  Model Predictive Control for Mobile Robots with Actively Reconfigurable Chassis , 2009, FSR.

[8]  A. R. Reece.  Paper 2: The Fundamental Equation of Earth-Moving Mechanics , 1964 .

[9]  Paul S. Schenker,et al.  Reconfigurable robots for all-terrain exploration , 2000, SPIE Optics East.

[10]  Takashi Kubota,et al.  Novel mobility system with active suspension for planetary surface exploration , 2011, 2011 Aerospace Conference.

[11]  Kenji Nagaoka,et al.  Evaluation of the reconfiguration effects of planetary rovers on their lateral traversing of sandy slopes , 2012, 2012 IEEE International Conference on Robotics and Automation.

[12]  Kazuya Yoshida,et al.  Motion dynamics of a rover with slip-based traction model , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[13]  Kazuya Yoshida,et al.  Slope traversal controls for planetary exploration rover on sandy terrain , 2009, J. Field Robotics.

[14]  Kazuya Yoshida,et al.  Terramechanics‐based model for steering maneuver of planetary exploration rovers on loose soil , 2007, J. Field Robotics.

[15]  Sachiko Wakabayashi,et al.  Design and mobility evaluation of tracked lunar vehicle , 2009 .

[16]  B. Hanamoto,et al.  The analytical determination of drawbar pull as a function of slip for tracked vehicles in deformable soils , 1961 .

[17]  S. V. Sreenivasan,et al.  Stability and traction control of an actively actuated micro-rover , 1994, J. Field Robotics.

[18]  石上 玄也,et al.  Terramechanics-based analysis and control for lunar/planetary exploration robots , 2008 .

[19]  Steven Dubowsky,et al.  Control of Robotic Vehicles with Actively Articulated Suspensions in Rough Terrain , 2003, Auton. Robots.

[20]  J. P. Pruiksma,et al.  Assessment of Tractive Performances of Planetary Rovers with Flexible Wheels Operating in Loosely Packed Soils , 2010 .

[21]  Kazuya Yoshida,et al.  Traveling performance evaluation of planetary rovers on loose soil , 2012, J. Field Robotics.

[22]  Takeshi Aoki,et al.  Mechanical design of three-wheeled lunar rover; “Tri-Star IV” , 2011, 2011 IEEE International Conference on Robotics and Automation.

[23]  Tim D. Barfoot,et al.  Experimental and simulation results of wheel-soil interaction for planetary rovers , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[24]  M. G. Bekker,et al.  Off-the-road locomotion , 1960 .

[25]  Lee F. Sword,et al.  New planetary rovers for long-range Mars science and sample return , 1998, Other Conferences.

[26]  Frédéric Plumet,et al.  Stability and Traction Optimization of a Reconfigurable Wheel-Legged Robot , 2004, Int. J. Robotics Res..

[27]  Jeffrey J. Biesiadecki,et al.  Athlete: A cargo handling and manipulation robot for the moon , 2007, J. Field Robotics.

[28]  Steven Dubowsky,et al.  On-line terrain parameter estimation for planetary rovers , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[29]  Kazuya Yoshida,et al.  Accurate estimation of drawbar pull of wheeled mobile robots traversing sandy terrain using built-in force sensor array wheel , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[30]  Jo Yung Wong,et al.  Theory of ground vehicles , 1978 .

[31]  Giancarlo Genta,et al.  Dynamic modeling of wheeled planetary rovers: A model based on the pseudo-coordiates approach , 2012 .

[32]  A. R. Reece,et al.  Prediction of rigid wheel performance based on the analysis of soil-wheel stresses part I. Performance of driven rigid wheels , 1967 .