A review of prognostics and health management of machine tools

This paper presents a survey of the applications of prognostics and health management maintenance strategy to machine tools. A complete perspective on this Industry 4.0 cutting-edge maintenance policy, through the analysis of all its preliminary phases, is given as an introduction. Then, attention is given to prognostics, whose different approaches are briefly classified and explained, pointing out their advantages and shortcomings. After that, all the works on prognostics of machine tools and their main subsystem are reviewed, highlighting current open research areas for improvement.

[1]  Xiang Li,et al.  Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model , 2018, J. Intell. Manuf..

[2]  Jay Lee,et al.  Watchdog Agent - an infotronics-based prognostics approach for product performance degradation assessment and prediction , 2003, Adv. Eng. Informatics.

[3]  Loredana Cristaldi,et al.  A comparative study on data-driven prognostic approaches using fleet knowledge , 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.

[4]  Binbin Xu,et al.  Comparison between Bayesian Method and LSE in Estimating MTBF of NC Machine Tools , 2015, 2015 International Conference on Computer Science and Mechanical Automation (CSMA).

[5]  Rui Kang,et al.  Benefits analysis of prognostics in systems , 2010, 2010 Prognostics and System Health Management Conference.

[6]  Konrad Wegener,et al.  A fundamental approach for data acquisition on machine tools as enabler for analytical Industrie 4.0 applications , 2019, Procedia CIRP.

[7]  M. G. Thurston.  An open standard for Web-based condition-based maintenance systems , 2001, 2001 IEEE Autotestcon Proceedings. IEEE Systems Readiness Technology Conference. (Cat. No.01CH37237).

[8]  Xiang Li,et al.  An Intelligent Predictive Engine for Milling Machine Prognostic Monitoring , 2006, 2006 4th IEEE International Conference on Industrial Informatics.

[9]  T. Kurfess,et al.  Tool life predictions in milling using spindle power with the neural network technique , 2016 .

[10]  Michael Pecht,et al.  Modeling Approaches for Prognostics and Health Management of Electronics , 2010 .

[11]  Steven X. Ding,et al.  A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches , 2015, IEEE Transactions on Industrial Electronics.

[12]  Enrico Zio,et al.  Artificial intelligence for fault diagnosis of rotating machinery: A review , 2018, Mechanical Systems and Signal Processing.

[13]  Raj Bhatnagar,et al.  Data driven predictive analytics for a spindle's health , 2015, 2015 IEEE International Conference on Big Data (Big Data).

[14]  Xu Jia,et al.  Failure mode and effects analysis of CNC machine tools based on SPA , 2017, 2017 2nd International Conference on System Reliability and Safety (ICSRS).

[15]  Geok Soon Hong,et al.  Prognosis of the probability of failure in tool condition monitoring application-a time series based approach , 2015 .

[16]  G. Kacprzynski,et al.  Advances in uncertainty representation and management for particle filtering applied to prognostics , 2008, 2008 International Conference on Prognostics and Health Management.

[17]  Dirk van Schrick,et al.  Remarks on Terminology in the Field of Supervision, Fault Detection and Diagnosis , 1997 .

[18]  L. Cristaldi,et al.  Toward a new definition of FMECA approach , 2015, 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

[19]  Z. J. Yang,et al.  Reliability analysis of machining center based on the field data , 2013 .

[20]  K. Goebel,et al.  Standardizing research methods for prognostics , 2008, 2008 International Conference on Prognostics and Health Management.

[21]  Wei Zhang,et al.  Systematic study of the prediction methods for machined surface topography and form error during milling process with flat-end cutter , 2019 .

[22]  Noureddine Zerhouni,et al.  Health assessment and life prediction of cutting tools based on support vector regression , 2015, J. Intell. Manuf..

[23]  Hung-Cuong Trinh,et al.  A Data-Independent Genetic Algorithm Framework for Fault-Type Classification and Remaining Useful Life Prediction , 2020, Applied Sciences.

[24]  Max Kuhn,et al.  Applied Predictive Modeling , 2013 .

[25]  Roger Serra,et al.  Cutting tools reliability and residual life prediction from degradation indicators in turning process , 2016 .

[26]  Samy E. Oraby,et al.  Tool life determination based on the measurement of wear and tool force ratio variation , 2004 .

[27]  Xun Xu,et al.  Machine Tool 4.0 for the new era of manufacturing , 2017 .

[28]  Lin Li,et al.  Industrial Big Data in an Industry 4.0 Environment: Challenges, Schemes, and Applications for Predictive Maintenance , 2017, IEEE Access.

[29]  Robert X. Gao,et al.  Deep learning and its applications to machine health monitoring , 2019, Mechanical Systems and Signal Processing.

[30]  Colin Bradley,et al.  A review of machine vision sensors for tool condition monitoring , 1997 .

[31]  Sankalita Saha,et al.  Evaluating algorithm performance metrics tailored for prognostics , 2009, 2009 IEEE Aerospace conference.

[32]  K. Goebel,et al.  Metrics for evaluating performance of prognostic techniques , 2008, 2008 International Conference on Prognostics and Health Management.

[33]  Noureddine Zerhouni,et al.  CNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks , 2012 .

[34]  X Li,et al.  Fuzzy Regression Modeling for Tool Performance Prediction and Degradation Detection , 2010, Int. J. Neural Syst..

[35]  Dong-Woo Cho,et al.  Estimating cutting force from rotating and stationary feed motor currents on a milling machine , 2002 .

[36]  S F Bush.  Scale, order and complexity in polymer processing , 2000 .

[37]  Eric Bechhoefer,et al.  Lubrication Oil Condition Monitoring and Remaining Useful Life Prediction with Particle Filtering , 2020 .

[38]  Carey Bunks,et al.  CONDITION-BASED MAINTENANCE OF MACHINES USING HIDDEN MARKOV MODELS , 2000 .

[39]  Hongli Gao,et al.  Screw performance degradation assessment based on quantum genetic algorithm and dynamic fuzzy neural network , 2015 .

[40]  Hongli Gao,et al.  Remaining useful life prediction of the ball screw system based on weighted Mahalanobis distance and an exponential model , 2018, Journal of Vibroengineering.

[41]  Laxman Yadu Waghmode,et al.  Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data , 2018, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability.

[42]  Shaoping Wang,et al.  Prognostic analysis based on hybrid prediction method for axial piston pump , 2012, IEEE 10th International Conference on Industrial Informatics.

[43]  Peter W. Tse,et al.  A Relevance Vector Machine-Based Approach with Application to Oil Sand Pump Prognostics , 2013, Sensors.

[44]  Hongru Li,et al.  Prognostic for hydraulic pump based upon DCT-composite spectrum and the modified echo state network , 2016, SpringerPlus.

[45]  Sarangapani Jagannathan,et al.  Mahalanobis-Taguchi System as a Multi-Sensor Based Decision Making Prognostics Tool for Centrifugal Pump Failures , 2011, IEEE Transactions on Reliability.

[46]  Chuanhai Chen,et al.  Reliability assessment of the spindle systems with a competing risk model , 2019 .

[47]  Steven Y. Liang,et al.  Damage mechanics approach for bearing lifetime prognostics , 2002 .

[48]  Shuang Liang,et al.  A weighted hidden Markov model approach for continuous-state tool wear monitoring and tool life prediction , 2016, The International Journal of Advanced Manufacturing Technology.

[49]  Hugh McManus,et al.  A framework for understanding uncertainty and its mitigation and exploitation in complex systems , 2006, IEEE Engineering Management Review.

[50]  Ying Peng,et al.  Current status of machine prognostics in condition-based maintenance: a review , 2010 .

[51]  Vladimir Stojanovic,et al.  Robust identification of OE model with constrained output using optimal input design , 2016, J. Frankl. Inst..

[52]  Jose Vicente Abellan-Nebot,et al.  A review of machining monitoring systems based on artificial intelligence process models , 2010 .

[53]  Vladimir Stojanovic,et al.  A nature inspired optimal control of pneumatic-driven parallel robot platform , 2017 .

[54]  Dong-Chul Han,et al.  Cutting Force Estimation by Measuring Spindle Displacement in Milling Process , 2005 .

[55]  Linxia Liao,et al.  Machinery time to failure prediction - Case study and lesson learned for a spindle bearing application , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[56]  Xiaodong Jia,et al.  Prognosability study of ball screw degradation using systematic methodology , 2018, Mechanical Systems and Signal Processing.

[57]  Vladimir Stojanovic,et al.  Joint state and parameter robust estimation of stochastic nonlinear systems , 2016 .

[58]  Hsuan-Tien Lin,et al.  Learning From Data , 2012 .

[59]  Chao Wang,et al.  Design of an instrumented smart cutting tool and its implementation and application perspectives , 2014 .

[60]  Takashi Yoneyama,et al.  Prognostics and Health Monitoring for an electro-hydraulic flight control actuator , 2009, 2009 IEEE Aerospace conference.

[61]  K. Goebel,et al.  Fusing competing prediction algorithms for prognostics , 2006, 2006 IEEE Aerospace Conference.

[62]  Brian A. Weiss,et al.  A review of diagnostic and prognostic capabilities and best practices for manufacturing , 2019, J. Intell. Manuf..

[63]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[64]  George Vachtsevanos,et al.  Methodologies for uncertainty management in prognostics , 2009, 2009 IEEE Aerospace conference.

[65]  Yaguo Lei,et al.  Machinery health prognostics: A systematic review from data acquisition to RUL prediction , 2018 .

[66]  Christopher M. Bishop,et al.  Pattern Recognition and Machine Learning (Information Science and Statistics) , 2006 .

[67]  Jie Wang,et al.  CHMM for tool condition monitoring and remaining useful life prediction , 2012 .

[68]  T. Yoneyama,et al.  Prognostics performance metrics and their relation to requirements, design, verification and cost-benefit , 2008, 2008 International Conference on Prognostics and Health Management.

[69]  Brian A. Weiss,et al.  The present status and future growth of maintenance in US manufacturing: results from a pilot survey , 2016, Manufacturing review.

[70]  Sarangapani Jagannathan,et al.  Mahalanobis Taguchi System (MTS) as a Prognostics Tool for Rolling Element Bearing Failures , 2010 .

[71]  Pavol Tanuska,et al.  Concept of predictive maintenance of production systems in accordance with industry 4.0 , 2017, 2017 IEEE 15th International Symposium on Applied Machine Intelligence and Informatics (SAMI).

[72]  Chuanhai Chen,et al.  Reliability Modelling of CNC Machine Tools Based on the Improved Maximum Likelihood Estimation Method , 2018 .

[73]  David L. Iverson.  Inductive System Health Monitoring , 2004, IC-AI.

[74]  Noureddine Zerhouni,et al.  Novel failure prognostics approach with dynamic thresholds for machine degradation , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[75]  Douglas C. Montgomery,et al.  Applied Statistics and Probability for Engineers, Third edition , 1994 .

[76]  Loredana Cristaldi,et al.  A root cause analysis and a risk evaluation of PV balance of system failures , 2017 .

[77]  Jay Lee,et al.  Intelligent prognostics tools and e-maintenance , 2006, Comput. Ind..

[78]  Xinpeng Zhang,et al.  Novelty detection methods for online health monitoring and post data analysis of turbopumps , 2013, Journal of Mechanical Science and Technology.

[79]  Andreas Albrecht,et al.  High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors , 2005 .

[80]  Yusuf Altintas,et al.  Dynamic Compensation of Spindle Integrated Force Sensors With Kalman Filter , 2004 .

[81]  Jeffrey Alun Jones,et al.  Comparison of Computational Prognostic Methods for Complex Systems Under Dynamic Regimes: A Review of Perspectives , 2019, Archives of Computational Methods in Engineering.

[82]  Dongfeng Shi,et al.  Tool wear predictive model based on least squares support vector machines , 2007 .

[83]  Peter Kipruto Chemweno,et al.  A review on lubricant condition monitoring information analysis for maintenance decision support , 2019, Mechanical Systems and Signal Processing.

[84]  Marcantonio Catelani,et al.  FMECA technique on photovoltaic module , 2011, 2011 IEEE International Instrumentation and Measurement Technology Conference.

[85]  Tarak Benkedjouh,et al.  Tool Wear Condition Monitoring Based on Blind Source Separation and Wavelet Transform , 2017 .

[86]  Yinhui Ao,et al.  Prognostics for drilling process with wavelet packet decomposition , 2010 .

[87]  Jay Lee,et al.  Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications , 2014 .

[88]  B. S. Pabla,et al.  Condition based maintenance of machine tools—A review , 2015 .

[89]  Linxia Liao,et al.  Discovering Prognostic Features Using Genetic Programming in Remaining Useful Life Prediction , 2014, IEEE Transactions on Industrial Electronics.

[90]  Steven X. Ding,et al.  A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part II: Fault Diagnosis With Knowledge-Based and Hybrid/Active Approaches , 2015, IEEE Transactions on Industrial Electronics.

[91]  Noureddine Zerhouni,et al.  The ISO 13381-1 standard's failure prognostics process through an example , 2010, 2010 Prognostics and System Health Management Conference.

[92]  Scott Poll,et al.  A Survey of Health Management User Objectives in Aerospace Systems Related to Diagnostic and Prognostic Metrics , 2021 .

[93]  Leonardo Ramos Rodrigues,et al.  Using Degradation Messages to Predict Hydraulic System Failures in a Commercial Aircraft , 2018, IEEE Transactions on Automation Science and Engineering.

[94]  Daniel E. Hastings,et al.  3.4.1 A Framework for Understanding Uncertainty and its Mitigation and Exploitation in Complex Systems , 2005 .

[95]  Mehdi Salehi,et al.  Model-based broadband estimation of cutting forces and tool vibration in milling through in-process indirect multiple-sensors measurements , 2016 .

[96]  Binbin Xu,et al.  Reliability Analysis of Numerical Control Lathe Based On The Field Data , 2015 .

[97]  Vladimir Stojanovic,et al.  Optimal control of hydraulically driven parallel robot platform based on firefly algorithm , 2015 .

[98]  George Chryssolouris,et al.  Tool wear predictability estimation in milling based on multi-sensorial data , 2016 .

[99]  J. Soulard,et al.  An experimental investigation on ultra-precision instrumented smart aerostatic bearing spindle applied to high speed micro-drilling , 2018 .

[100]  Donghua Zhou,et al.  Remaining useful life estimation - A review on the statistical data driven approaches , 2011, Eur. J. Oper. Res..

[101]  Linxia Liao,et al.  Review of Hybrid Prognostics Approaches for Remaining Useful Life Prediction of Engineered Systems, and an Application to Battery Life Prediction , 2014, IEEE Transactions on Reliability.

[102]  Noureddine Zerhouni,et al.  Joint Prediction of Continuous and Discrete States in Time-Series Based on Belief Functions , 2013, IEEE Transactions on Cybernetics.

[103]  Raphael T. Haftka,et al.  Reducing Uncertainty in Damage Growth Properties by Structural Health Monitoring , 2009 .

[104]  Jay Lee,et al.  Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment , 2014 .

[105]  Xuefeng Chen,et al.  The concept and progress of intelligent spindles: A review , 2017 .

[106]  M.J. Roemer,et al.  Validation and verification of prognostic and health management technologies , 2005, 2005 IEEE Aerospace Conference.

[107]  J. Dunsdon,et al.  An Open System Architecture for Condition Based Maintenance Overview , 2007, 2007 IEEE Aerospace Conference.

[108]  Peter W. Tse,et al.  Prognostics of slurry pumps based on a moving-average wear degradation index and a general sequential Monte Carlo method , 2015 .

[109]  Matthew J. Watson,et al.  In-line health monitoring system for hydraulic pumps and motors , 2003, 2003 IEEE Aerospace Conference Proceedings (Cat. No.03TH8652).

[110]  Binbin Xu,et al.  Bayesian reliability modeling and assessment solution for NC machine tools under small-sample data , 2015 .

[111]  Kamran Javed,et al.  Robust, reliable and applicable tool wear monitoring and prognostic: Approach based on an improved-extreme learning machine , 2012, 2012 IEEE Conference on Prognostics and Health Management.

[112]  Sankalita Saha,et al.  Metrics for Offline Evaluation of Prognostic Performance , 2021, International Journal of Prognostics and Health Management.

[113]  C.S. Byington,et al.  A model-based approach to prognostics and health management for flight control actuators , 2004, 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720).

[114]  Xifan Yao,et al.  Tool Condition Monitoring and Remaining Useful Life Prognostic Based on a Wireless Sensor in Dry Milling Operations , 2016, Sensors.