Investigation of rock slope stability using a 3D nonlinear strength-reduction numerical manifold method

Abstract Due to rock masses' nonlinear failure property, it is inappropriate to investigate the stability of rock slopes using the traditional SRM (strength reduction method) which is based on the linear MC (Mohr-Coulomb) failure criterion. To conduct 3D analysis (three dimensional) of rock slopes, we propose a 3D-NSRNMM (3D nonlinear strength reduction numerical manifold method) that is based on the nonlinear GHB (Generalized Hoek-Brown) failure criterion. To effectively implement the proposed 3D-NSRNMM, two methods are adopted to convert the GHB parameters into the average and instantaneous equivalent MC parameters. With the proposed 3D-NSRNMM, the influences of different types of equivalent MC parameters, and boundary conditions on rock slopes' stability are investigated. The numerical results assessed from the proposed 3D-NSRNMM indicate that: 1) boundary conditions will significantly influence the safety factor and failure mode of a rock slope obtained from 3D analysis; 2) the safety factor from two-dimensional analysis is more conservative compared with 3D analysis; 3) Furthermore, safety factors based on the instantaneous equivalent MC parameters are very close to those based on the average equivalent MC parameters, but 3D rock slopes' failure modes based on the two different types of equivalent MC parameters are a little different from each other.

[1]  W. Fu,et al.  Non-linear shear strength reduction technique in slope stability calculation , 2010 .

[2]  Dongdong Xu,et al.  Modeling Wave Propagation in Rock Masses Using the Contact Potential-Based Three-Dimensional Discontinuous Deformation Analysis Method , 2021, Rock Mechanics and Rock Engineering.

[3]  H. Zheng,et al.  Phreatic line calculation and stability analysis of slopes under the combined effect of reservoir water level fluctuations and rainfall , 2017 .

[4]  Timon Rabczuk,et al.  Dual-horizon peridynamics: A stable solution to varying horizons , 2017, 1703.05910.

[5]  H. Zheng,et al.  A high-order numerical manifold method with continuous stress/strain field , 2020 .

[6]  R. Lewis,et al.  Associated and non-associated visco-plasticity and plasticity in soil mechanics , 1975 .

[7]  Tamotsu Matsui,et al.  Finite element slope stability analysis by shear strength reduction technique , 1992 .

[8]  Gao Yongtao,et al.  Numerical simulation analysis on strength reduction for slope of jointed rock masses based on gereralized Hoek-Brown failure criterion , 2006 .

[9]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[10]  D. Fredlund,et al.  Comparison of slope stability methods of analysis , 1977 .

[11]  H. Zheng,et al.  Stability analysis of soil-rock-mixture slopes using the numerical manifold method , 2019 .

[12]  E. Eberhardt.  The Hoek–Brown Failure Criterion , 2012, Rock Mechanics and Rock Engineering.

[13]  Louis Ngai Yuen Wong,et al.  Frictional crack initiation and propagation analysis using the numerical manifold method , 2012 .

[14]  Xiurun Ge,et al.  Slope stability analysis under seismic load by vector sum analysis method , 2011 .

[15]  Feng Liu,et al.  A new contact potential based three-dimensional discontinuous deformation analysis method , 2020 .

[16]  M. Hossaini,et al.  Statistical analysis of bimslope stability using physical and numerical models , 2019, Engineering Geology.

[17]  Guowei Ma,et al.  Footwall slope stability analysis with the numerical manifold method , 2011 .

[18]  A. Drescher,et al.  Slope stability analysis by strength reduction , 1999 .

[19]  E. T. Brown,et al.  Underground excavations in rock , 1980 .

[20]  Hong Zheng,et al.  Modeling complex crack problems using the three-node triangular element fitted to numerical manifold method with continuous nodal stress , 2017 .

[21]  J. Z. Zhu,et al.  The finite element method , 1977 .

[22]  H. Zheng,et al.  Hydro-mechanical simulation of the saturated and semi-saturated porous soil–rock mixtures using the numerical manifold method , 2020 .

[23]  T. Belytschko,et al.  A three dimensional large deformation meshfree method for arbitrary evolving cracks , 2007 .

[24]  Chunguang Li,et al.  Slope stability analysis based on elasto‐plastic finite element method , 2005 .

[25]  H. Zheng,et al.  Investigation of the sequential excavation of a soil-rock-mixture slope using the numerical manifold method , 2019, Engineering Geology.

[26]  H. Zheng,et al.  Modeling unconfined seepage flow in soil-rock mixtures using the numerical manifold method , 2019, Engineering Analysis with Boundary Elements.

[27]  H. Zheng,et al.  A phase field numerical manifold method for crack propagation in quasi-brittle materials , 2021 .

[28]  H. Zheng,et al.  Reformulation of dynamic crack propagation using the numerical manifold method , 2019, Engineering Analysis with Boundary Elements.

[29]  Wang Wei,et al.  A strength reduction method based on the Generalized Hoek-Brown (GHB) criterion for rock slope stability analysis , 2020 .

[30]  A. Khoei,et al.  An extended finite element method for hydraulic fracture propagation in deformable porous media with the cohesive crack model , 2013 .

[31]  H. Zheng,et al.  Searching for critical slip surfaces of slopes using stress fields by numerical manifold method , 2020 .

[32]  H. Zheng,et al.  Modeling the entire progressive failure process of rock slopes using a strength-based criterion , 2020 .

[33]  Gen-Hua Shi,et al.  Manifold Method of Material Analysis , 1992 .

[34]  Quansheng Liu,et al.  Grout penetration process simulation and grouting parameters analysis in fractured rock mass using numerical manifold method , 2021 .

[35]  D. Naylor,et al.  Finite Elements and Slope Stability , 1982 .

[36]  D. J. Naylor,et al.  Safety analysis using finite elements , 1998 .

[37]  Chuangbing Zhou,et al.  Modeling Unconfined Seepage Flow Using Three-Dimensional Numerical Manifold Method , 2010 .

[38]  Hong Zheng,et al.  New strategies for some issues of numerical manifold method in simulation of crack propagation , 2014 .

[39]  Pieter A. Vermeer,et al.  A Hoek–Brown criterion with intrinsic material strength factorization , 2008 .

[40]  K. Bian,et al.  Investigating the softening of weak interlayers during landslides using nanoindentation experiments and simulations , 2020 .

[41]  Ted Belytschko,et al.  Cracking particles: a simplified meshfree method for arbitrary evolving cracks , 2004 .

[42]  Hang Lin,et al.  Consistency analysis of Hoek–Brown and equivalent Mohr–coulomb parameters in calculating slope safety factor , 2018, Bulletin of Engineering Geology and the Environment.

[43]  Hong Zheng,et al.  Modelling the stability of a soil-rock-mixture slope based on the digital image technology and strength reduction numerical manifold method , 2021 .

[44]  H. Zheng,et al.  Numerical study of soil-rock mixture: Generation of random aggregate structure , 2018 .

[45]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[46]  Hong Zheng,et al.  A three‐dimensional rigorous method for stability analysis of landslides , 2012 .

[47]  Murat Karakus,et al.  Three-dimensional numerical analysis for rock slope stability using shear strength reduction method , 2014 .

[48]  Hong Zheng,et al.  Direct Approach to Treatment of Contact in Numerical Manifold Method , 2017 .

[49]  Hong Zheng,et al.  Explicit Discontinuous Deformation Analysis Method with Lumped Mass Matrix for Highly Discrete Block System , 2018, International Journal of Geomechanics.

[50]  H. Zheng,et al.  Sequential excavation analysis of soil-rock-mixture slopes using an improved numerical manifold method with multiple layers of mathematical cover systems , 2019, Engineering Geology.

[51]  Z. Tingting.  DETERMINATION OF SHEAR STRENGTH REDUCTION FACTOR FOR GENERALIZED HOEK-BROWN CRITERION , 2012 .

[52]  H. Zheng,et al.  Boundary settings for the seismic dynamic response analysis of rock masses using the numerical manifold method , 2018 .

[53]  K. Ugai,et al.  A Method of Calculation of Total Safety Factor of Slope by Elasto-Plastic FEM , 1989 .

[54]  H. Zheng,et al.  An improved numerical manifold method with multiple layers of mathematical cover systems for the stability analysis of soil-rock-mixture slopes , 2020 .

[55]  Yongtao Yang,et al.  Enriched mixed numerical manifold formulation with continuous nodal gradients for dynamics of fractured poroelasticity , 2020 .

[56]  J. M. Duncan.  State of the Art: Limit Equilibrium and Finite-Element Analysis of Slopes , 1996 .

[57]  Timon Rabczuk,et al.  Element-wise fracture algorithm based on rotation of edges , 2013 .

[58]  H. Zheng,et al.  Three-dimensional fracture propagation with numerical manifold method , 2016 .

[59]  Ashok K. Chugh,et al.  On the boundary conditions in slope stability analysis , 2003 .

[60]  Hong Zheng,et al.  Hydraulic fracturing modeling using the enriched numerical manifold method , 2018 .

[61]  H. Zheng,et al.  A rigorous and unified mass lumping scheme for higher-order elements , 2017 .

[62]  Tingting Liu,et al.  A new method of assessing the stability of anti-dip bedding rock slopes subjected to earthquake , 2021, Bulletin of Engineering Geology and the Environment.

[63]  Yongtao Yang,et al.  Stability analysis of slopes using the vector sum numerical manifold method , 2020, Bulletin of Engineering Geology and the Environment.

[64]  Hong Zheng,et al.  A practical procedure for searching critical slip surfaces of slopes based on the strength reduction technique , 2009 .

[65]  D. V. Griffiths,et al.  SLOPE STABILITY ANALYSIS BY FINITE ELEMENTS , 1999 .

[66]  Hong Zheng,et al.  A stability analysis of rock slopes using a nonlinear strength reduction numerical manifold method , 2021 .

[67]  Charles E. Augarde,et al.  Fracture modeling using meshless methods and level sets in 3D: Framework and modeling , 2012 .

[68]  Tao Chen,et al.  Numerical determination of the effective permeability coefficient of soil–rock mixtures using the numerical manifold method , 2018, International Journal for Numerical and Analytical Methods in Geomechanics.

[69]  S. Priest,et al.  Determination of Mohr–Coulomb Shear Strength Parameters from Generalized Hoek–Brown Criterion for Slope Stability Analysis , 2011, Rock Mechanics and Rock Engineering.