Optimize tool paths of flank milling with generic cutters based on approximation using the tool envelope surface

This paper presents a global optimization method to generate a tool path for flank milling free-form surfaces with a generic cutter based on approximation using the tool envelope surface. It is an extension of our previous work [Gong Hu, Cao Li-Xin, Liu Jian. Improved positioning of cylindrical cutter for flank milling ruled surfaces. Computer Aided Design 2005; 37:1205-13]. First, given initial tool path or tool axis trajectory surface, the grazing points of the tool envelope surface can be calculated. Second, the errors between the tool envelope surface and the designed surface along the normal direction of the tool envelope surface are calculated. Based on this new definition of error, an optimization model is established to get the global optimized tool axis trajectory surface. In order to simplify the calculation, two variants of this method based on the least square criterion are proposed to solve this model. Since this method is really based on the tool envelope surface, it can reduce the initial machining errors effectively. The proposed method can be used not only for cylindrical cutters and conical cutters, but also for generic cutters with a surface of revolution. In addition to ruled surfaces, it also can be used for machining non-ruled surfaces. Finally, several examples are given to prove its effectiveness and accuracy. The generated tool paths and calculated grazing points for test are available in supplementary files for the readers' convenience in verifying this work in different CAD/CAM systems.

[1]  L.-C. Chuang,et al.  A five-axis rough machining approach for a centrifugal impeller , 2004 .

[2]  Xiong-Wei Liu,et al.  Five-axis NC cylindrical milling of sculptured surfaces , 1995, Comput. Aided Des..

[3]  Johanna Senatore,et al.  Optimising positioning of the axis of a milling cutter on an offset surface by geometric error minimisation , 2008 .

[4]  L. Piegl,et al.  The NURBS Book , 1995, Monographs in Visual Communications.

[5]  John C. J. Chiou,et al.  Accurate tool position for five-axis ruled surface machining by swept envelope approach , 2004, Comput. Aided Des..

[6]  Jian Liu,et al.  Improved positioning of cylindrical cutter for flank milling ruled surfaces , 2005, Comput. Aided Des..

[7]  Chih-Hsing Chu,et al.  Optimized tool path generation based on dynamic programming for five-axis flank milling of rule surface , 2008 .

[8]  Jian Liu,et al.  Second order approximation of tool envelope surface for 5-axis machining with single point contact , 2008, Comput. Aided Des..

[9]  Han Ding,et al.  Semidefinite programming for Chebyshev fitting of spatial straight line with applications to cutter location planning and tolerance evaluation , 2007 .

[10]  Sanjeev Bedi,et al.  Flank milling with flat end milling cutters , 2003, Comput. Aided Des..

[11]  Claire Lartigue,et al.  Tool path deformation in 5-axis flank milling using envelope surface , 2003, Comput. Aided Des..

[12]  W. Anotaipaiboon,et al.  Tool path generation for five-axis NC machining using adaptive space-filling curves , 2005 .

[13]  Yuan-Shin Lee,et al.  Optimizing tool orientations for 5-axis machining by configuration-space search method , 2003, Comput. Aided Des..

[14]  Johanna Senatore,et al.  Analytical estimation of error in flank milling of ruled surfaces , 2008, Comput. Aided Des..

[15]  Walter Rubio,et al.  Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference , 1998 .

[16]  B. Ravani,et al.  Cylindrical milling of ruled surfaces , 2008 .

[17]  Johanna Senatore,et al.  Analysis of improved positioning in five-axis ruled surface milling using envelope surface , 2005, Comput. Aided Des..

[18]  Frederic Monies,et al.  Improved positioning of a conical mill for machining ruled surfaces: Application to turbine blades , 2000 .

[19]  Ning Wang,et al.  Analytical calculation of the envelope surface for generic milling tools directly from CL-data based on the moving frame method , 2009, Comput. Aided Des..

[20]  C. Y. Wu.  Arbitrary Surface Flank Milling of Fan, Compressor, and Impeller Blades , 1995 .

[21]  Sanjeev Bedi,et al.  Triple tangent flank milling of ruled surfaces , 2004, Comput. Aided Des..

[22]  A. Lamikiz,et al.  The CAM as the centre of gravity of the five-axis high speed milling of complex parts , 2005 .

[23]  Sanjeev Bedi,et al.  Error measurements for flank milling , 2005, Comput. Aided Des..

[24]  Der Min Tsay,et al.  Accurate 5-Axis Machining of Twisted Ruled Surfaces , 2001 .

[25]  Chih-Hsing Chu,et al.  Tool Path Planning for 5-Axis Flank Milling Based on Dynamic Programming Techniques , 2008, GMP.

[26]  Chih-Hsing Chu,et al.  Tool path planning for five-axis flank milling with developable surface approximation , 2006 .

[27]  Johanna Senatore,et al.  Improved positioning for side milling of ruled surfaces: Analysis of the rotation axis's influence on machining error , 2007 .