Enhanced Single-Stage Folded Cascode OTA Suitable for Large Capacitive Loads

An enhanced single-stage folded cascode operational transconductance amplifier able to drive large capacitive loads is presented. Circuits that adaptively bias the input differential pair and the current folding stage are employed, which provide class AB operation with dynamic current boosting and increased gain-bandwidth (GBW) product. Measurement results of a test chip prototype fabricated in a 0.5-<inline-formula> <tex-math notation="LaTeX">$\mu$ </tex-math></inline-formula>m CMOS process show an increase in slew rate and GBW by a factor of 30 and 15, respectively, versus the class A version using the same supply voltage and bias currents. Overhead in other performance metrics is small.

[1]  L. R. Carley,et al.  An enhanced fully differential folded-cascode op amp , 1992 .

[2]  Vincenzo Peluso,et al.  900 mV differential class AB OTA for switched opamp applications , 1997 .

[3]  Johan H. Huijsing,et al.  Compact low-voltage power-efficient operational amplifier cells for VLSI , 1998, IEEE J. Solid State Circuits.

[4]  P. Kinget,et al.  A 0.5-V bulk-input fully differential operational transconductance amplifier , 2004, Proceedings of the 30th European Solid-State Circuits Conference.

[5]  A.J. Lopez-Martin,et al.  Very low-voltage analog signal processing based on quasi-floating gate transistors , 2004, IEEE Journal of Solid-State Circuits.

[6]  Ramón González Carvajal,et al.  The flipped voltage follower: a useful cell for low-voltage low-power circuit design , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[7]  A.J. Lopez-Martin,et al.  Low-Voltage Super class AB CMOS OTA cells with very high slew rate and power efficiency , 2005, IEEE Journal of Solid-State Circuits.

[8]  Ramón González Carvajal,et al.  A free but efficient low-voltage class-AB two-stage operational amplifier , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[9]  José Silva-Martínez,et al.  The Recycling Folded Cascode: A General Enhancement of the Folded Cascode Amplifier , 2009, IEEE Journal of Solid-State Circuits.

[10]  Hao Min,et al.  Transconductance enhancement method for operational transconductance amplifiers , 2010 .

[11]  Pui-In Mak,et al.  Double recycling technique for folded-cascode OTA , 2012 .

[12]  Paul M. Furth,et al.  Converting a Three-Stage Pseudoclass-AB Amplifier to a True-Class-AB Amplifier , 2012, IEEE Transactions on Circuits and Systems II: Express Briefs.

[13]  Santiago Celma,et al.  An Ultralow-Power Low-Voltage Class-AB Fully Differential OpAmp for Long-Life Autonomous Portable Equipment , 2012, IEEE Transactions on Circuits and Systems II: Express Briefs.

[14]  Syed Kamrul Islam,et al.  Low-Voltage Bulk-Driven Operational Amplifier With Improved Transconductance , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[15]  Tohid Moosazadeh,et al.  A single-stage operational amplifier with enhanced transconductance and slew rate for switched-capacitor circuits , 2014 .

[16]  Antonio Torralba,et al.  0.7-V Three-Stage Class-AB CMOS Operational Transconductance Amplifier , 2016, IEEE Transactions on Circuits and Systems I: Regular Papers.

[17]  Francisco Serra-Graells,et al.  Variable-Mirror Amplifier: A New Family of Process-Independent Class-AB Single-Stage OTAs for Low-Power SC Circuits , 2016, IEEE Transactions on Circuits and Systems I: Regular Papers.

[18]  Pakorn Prasopsin,et al.  A Sub-Microwatt Class-AB Super Buffer: Frequency Compensation for Settling-Time Improvement , 2018, IEEE Transactions on Circuits and Systems II: Express Briefs.