Design of a curvature-corrected bandgap reference with 7.5ppm/C temperature coefficient in 0.35µm CMOS process

This paper presents the design of high-precision curvature-corrected bandgap voltage reference circuit realized in 0.35μm CMOS technology. The circuit generates an output voltage of 500mV with temperature coefficient of 7.5ppm/C over a temperature range of -30C to 120C, with a power supply rejection ratio of 58dB at 100Hz, and an rms output noise of 5.33μV integrated from 0.1Hz to 10Hz. The circuit operates down to 1.8 volts with a line sensitivity of 0.12%/V. The design consumes 9.74μA of supply current, and occupies an area of 0.075mm2.

[1]  Ming-Dou Ker,et al.  New Curvature-Compensation Technique for CMOS Bandgap Reference With Sub-1-V Operation , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[2]  J. H. Huijsing,et al.  A curvature-corrected low-voltage bandgap reference , 1993 .

[3]  C. Fiocchi,et al.  Curvature compensated BiCMOS bandgap with 1 V supply voltage , 2001, Proceedings of the 26th European Solid-State Circuits Conference.

[4]  Y. Tsividis.  Accurate analysis of temperature effects in I/SUB c/V/SUB BE/ characteristics with application to bandgap reference sources , 1980, IEEE Journal of Solid-State Circuits.

[5]  Franco Maloberti,et al.  An improved bandgap reference with high power supply rejection , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[6]  Gyudong Kim,et al.  Exponential curvature-compensated BiCMOS bandgap references , 1994, IEEE J. Solid State Circuits.

[7]  Gabriel A. Rincon-Mora,et al.  A 1.1-V current-mode and piecewise-linear curvature-corrected bandgap reference , 1998, IEEE J. Solid State Circuits.

[8]  Ming-Dou Ker,et al.  New curvature-compensation technique for CMOS bandgap reference with sub-1-V operation , 2005, 2005 IEEE International Symposium on Circuits and Systems.

[9]  T. R. Viswanathan,et al.  A 1.4 V Supply CMOS Fractional Bandgap Reference , 2006, IEEE Journal of Solid-State Circuits.

[10]  V. Ivanov,et al.  A CMOS bandgap voltage reference with absolute value and temperature drift trims , 2005, 2005 IEEE International Symposium on Circuits and Systems.

[11]  Ka Nang Leung,et al.  Design of a 1.5-V high-order curvature-compensated CMOS bandgap reference , 2004, 2004 IEEE International Symposium on Circuits and Systems (IEEE Cat. No.04CH37512).