Character of distribution of the load between the balls in the ball bearings under the action combined of external load

Abstract The paper is devoted to mathematical modeling of the distribution pattern of the combined external load on the balls in the ball bearings and the development of methodology for determining the dependence of the maximum load on the balls of bearing depending on of the contact angle between raceway and the balls of bearing. The paper will be useful for scientific experts in the field of mechanics, design organizations associated with the design of various mechanisms, machinery and instruments, as well as students and teachers of technical colleges.

[1]  Cheng Yu,et al.  Bearing Strength of Cold-Formed Steel Bolted Connections Using Oversized Holes without Washers , 2011 .

[2]  Fulin Zhou,et al.  Experimental Study on Fire Resistance of Building Seismic Rubber Bearings , 2011 .

[3]  David,et al.  A New Model for Estimating Vibrations Generated in the Defective Rolling Element Bearings of the vibration response due to defects on rolling element bearings requires , 2011 .

[4]  Sarangapani Jagannathan,et al.  Mahalanobis Taguchi System (MTS) as a Prognostics Tool for Rolling Element Bearing Failures , 2010 .

[5]  Daniel Favrat,et al.  Integrated Design and Optimization of Gas Bearing Supported Rotors , 2010 .

[6]  B. Young,et al.  Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners , 2008 .

[7]  Abdolreza Joghataie,et al.  Dynamic Analysis of Nonlinear Frames by Prandtl Neural Networks , 2008 .

[8]  T. C. Gupta,et al.  Correlation of Parameters to Instability and Chaos of a Horizontal Flexible Rotor Ball Bearing System , 2013 .

[9]  Robert G. Parker,et al.  Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model , 2012 .

[10]  Hieu Nguyen,et al.  Directional Effects of Shear Combined with Compression on Bridge Elastomeric Bearings , 2010 .

[11]  C. S. Cai,et al.  Cable Vibration Control with a TMD-MR Damper System: Experimental Exploration , 2007 .

[12]  Avinash Singh,et al.  Effects of Bearing Preload, Oil Volume, and Operating Temperature on Axle Power Losses , 2012 .

[13]  Marek Krynke,et al.  A catalogue capacity of slewing bearings , 2012 .

[14]  Pierre Dehombreux,et al.  Singular Spectrum Analysis for Bearing Defect Detection , 2011 .

[15]  An Qi,et al.  Influences of eccentric unbalances on loads and life of auto water pump bearing , 2010 .

[16]  George C. Lee,et al.  Characterization of a Roller Seismic Isolation Bearing with Supplemental Energy Dissipation for Highway Bridges , 2010 .

[17]  Jan Valíček,et al.  Topographical anomaly on surfaces created by abrasive waterjet , 2012 .

[18]  Nicholas P. Jones,et al.  Vibration of Tensioned Beams with Intermediate Damper. I: Formulation, Influence of Damper Location , 2007 .

[19]  Theodor Krauthammer,et al.  Cladding-Structure Interaction under Impact Loads , 2005 .

[20]  Petr Baron,et al.  Sucking Machinery of Transport for Dosing Granulations of Plastics at Injection Molding , 2011 .