Progress towards the remote sensing of aircraft icing hazards

NASA has teamed with the FAA, DoD, industry, and academia for research into the remote detection and measurement of atmospheric conditions leading to aircraft icing hazards. The ultimate goal of this effort is to provide pilots, controllers, and dispatchers sufficient information to allow aircraft to avoid or minimize their exposure to the hazards of in-flight icing. Since the hazard of in-flight icing is the outcome of aircraft flight through clouds containing supercooled liquid water and strongly influenced by the aircraft's speed and configuration and by the length of exposure, the hazard can't be directly detected, but must be inferred based upon the measurement of conducive atmospheric conditions. Therefore, icing hazard detection is accomplished through the detection and measurement of liquid water in regions of measured sub-freezing air temperatures. The icing environment is currently remotely measured from the ground with a system fusing radar, lidar, and multi-frequency microwave radiometer sensors. Based upon expected ice accretion severity for the measured environment, a resultant aircraft hazard is then calculated. Because of the power, size, weight, and view angle constraints of airborne platforms, the current ground-based solution is not applicable for flight. Two current airborne concepts are the use of either multi-frequency radiometers or multi-frequency radar. Both ground-based and airborne solutions are required for the future since ground-based systems can provide hazard detection for all aircraft in airport terminal regions while airborne systems will be needed to provide equipped aircraft with flight path coverage between terminal regions.

[1]  J. B. Mead,et al.  EVALUATION OF TECHNOLOGIES FOR THE DESIGN OF A PROTOTYPE IN-FLIGHT REMOTE AIRCRAFT ICING POTENTIAL DETECTION SYSTEM , 1998 .

[2]  George G. Koenig,et al.  Overview of Mount Washington Icing Sensors Project , 2000 .

[3]  Marcia K. Politovich,et al.  Predicting In-Flight Aircraft Icing Intensity , 2003 .

[4]  David J. Brinker,et al.  NASA Icing Remote Sensing System comparisons from AIRS II , 2005 .

[5]  Eric P. Shettle,et al.  Atmospheric attenuation of millimeter and submillimeter waves: Models and computer code , 1979 .

[6]  Fuzhong Weng,et al.  Retrieval of Ice Cloud Parameters Using a Microwave Imaging Radiometer , 2000 .

[7]  Ed R. Westwater,et al.  Radiometric profiling of temperature, water vapor and cloud liquid water using various inversion methods , 1998 .

[8]  Domenico Cimini,et al.  Ground-Based Passive Microwave Profiling during Dynamic Weather Conditions , 2009 .

[9]  David Serke,et al.  The use of x-band radar to support the detection of in-flight icing hazards by the NASA Icing Remote Sensing System , 2008, Optical Engineering + Applications.

[10]  Andrew L. Reehorst,et al.  Ground-Based Icing Condition Remote Sensing System Definition , 2001 .

[11]  C. Knight,et al.  Cloud liquid water and radar reflectivity of nonprecipitating cumulus clouds , 1996 .

[12]  Frédéric Fabry,et al.  Observations of supercooled water and secondary ice generation by a vertically pointing X-band Doppler radar , 2001 .

[13]  Piedmont Airlines,et al.  AIRCRAFT ACCIDENT REPORT , 1969 .

[14]  Barbara G. Brown,et al.  Current Icing Potential: Algorithm Description and Comparison with Aircraft Observations , 2005 .

[15]  Guifu Zhang,et al.  An Assessment of Droplet Size and Liquid Water Content Derived from Dual-Wavelength Radar Measurements to the Application of Aircraft Icing Detection , 2001 .

[16]  George G. Koenig,et al.  Using RADTRAN to Simulate an Aircraft Microwave Radiometer to Detect Icing Potential , 2004 .

[17]  Andrew L. Reehorst,et al.  Millimeter-Wave Radar Field Measurements and Inversion of Cloud Parameters for the 1999 Mt. Washington Icing Sensors Project , 2001 .