Modeling and simulation analysis of PV fed Cuk, Sepic, Zeta and Luo DC-DC converter

This paper presents a modeling and simulation analysis of Photovoltaic (PV) fed Cuk, Sepic, Zeta and Luo DC-DC converters. The performance of all the MATLAB/Simulink based DC-DC converters is compared for the PV application. The results show the performance of all the designed converters and all the parameters used in designing the advanced DC-DC converters are calculated by using the respective converter mathematical analysis and summarized in tabulation form. The transient and steady state analysis of all the designed advanced DC-DC converters has been carried out in terms of voltage, current and power at fixed resistive load.

[1]  Rupendra Kumar Pachauri,et al.  Utilization of Energy Sources in Hybrid PV/FC Power Assisted Water Pumping System , 2015, 2015 IEEE International Conference on Computational Intelligence & Communication Technology.

[2]  Rupendra Kumar Pachauri,et al.  Effect of Environmental Conditions on Single and Double Diode PV system : Comparative Study , 2014 .

[3]  Ankit Gupta,et al.  Performance analysis of neural network and fuzzy logic based MPPT techniques for solar PV systems , 2014, 2014 6th IEEE Power India International Conference (PIICON).

[4]  Annu Mary Zacharias,et al.  Modeling and simulation of photovoltaic system with soft switching SEPIC converter , 2014, 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD).

[5]  D. S. Chauhan,et al.  Novel simulation approach to analyses the performance of SRM drive with ZETA converter , 2015, 2015 International Conference on Futuristic Trends on Computational Analysis and Knowledge Management (ABLAZE).

[6]  Rupendra Kumar Pachauri,et al.  Hybrid PV/FC stand alone green power generation: A perspective for Indian rural telecommunication systems , 2014, 2014 International Conference on Issues and Challenges in Intelligent Computing Techniques (ICICT).

[7]  M. Chilambarasan,et al.  Design and simulation of incremental conductance MPPT using self lift cuk converter , 2013, 2013 International Conference on Renewable Energy and Sustainable Energy (ICRESE).

[8]  R. Vidhya,et al.  AN IMPROVED LUO CONVERTER FOR HIGH POWER APPLICATIONS , 2014 .

[9]  Chandra Shetty,et al.  A quick and simplified approach for understanding the dynamics of the SEPIC converter for low voltage applications: Simulation study , 2015, 2015 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS).

[10]  B. Jayanand,et al.  Simulation and implementation of superlift Luo converter , 2013, 2013 International Conference on Renewable Energy and Sustainable Energy (ICRESE).

[12]  Saad Mekhilef,et al.  Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter , 2011, IEEE Transactions on Industrial Electronics.

[13]  J. Gnanavadivel,et al.  Power quality improvement techniques in AC-DC Cuk Converter , 2011, 2011 International Conference on Emerging Trends in Electrical and Computer Technology.

[14]  Nasrudin Abdul Rahim,et al.  Simulation of integrated SEPIC converter with multiplier cell for standalone PV application , 2011, 2011 IEEE Conference on Clean Energy and Technology (CET).

[15]  Bhim Singh,et al.  Power factor correction in a brushless DC motor drive using an isolated-Luo converter , 2014, 2014 6th IEEE Power India International Conference (PIICON).

[16]  Pravesh Kumar,et al.  Duty ratio control schemes of DC-DC boost converter integrated with solar PV system , 2015, 2015 International Conference on Energy Economics and Environment (ICEEE).

[17]  P. Baburaj,et al.  Interleaved Luo converter for the residential PV grid connected systems , 2015, 2015 10th Asian Control Conference (ASCC).

[18]  S. Ram Prasath,et al.  Simulation and performance analysis of CCM Zeta converter with PID controller , 2015, 2015 International Conference on Circuits, Power and Computing Technologies [ICCPCT-2015].

[19]  A. Boukhelifa,et al.  Design of a synchronous sepic DC-DC converter for a stand-alone photovoltaic system , 2015, 2015 IEEE 28th Canadian Conference on Electrical and Computer Engineering (CCECE).

[20]  Florian Ion,et al.  A COMPARATIVE STUDY OF SEPIC, CUK AND ZETA CONVERTERS , 2008 .

[21]  Sri Shakthi.  Design And Implementation Of Luo Converter For Electric Vehicle Applications , 2013 .

[22]  P. Cochat,et al.  Et al , 2008, Archives de pediatrie : organe officiel de la Societe francaise de pediatrie.

[23]  Bhim Singh,et al.  Power Factor Corrected Welding Power Supply Using Modified Zeta Converter , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[24]  M. Veerachary,et al.  Modeling and analysis of new zero current transition SEPIC converter , 2013, 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS).