Hydraulic Performances of Minimum Energy Loss Culverts in Australia

Culverts are among the most common hydraulic structures. Modern designs do not differ from ancient structures and are often characterized by significant afflux at the design flows. A significant advance was the development of the minimum energy loss (MEL) culverts in the late 1950s. The design technique allows a drastic reduction in the upstream flooding associated with lower costs. The development and operational performances of this type of structure is presented. The successful operation of MEL culverts for more than 40 years is documented with first-hand records during and after floods. The experiences demonstrate the design soundness, while highlighting the importance of the hydraulic expertise of the design engineers.

[1]  Arthur Sir Evans,et al.  The palace of Minos at Knossos : a comparative account of the successive stages of the early Cretan civilization as illustrated by the discoveries , 1929 .

[2]  M. H. Ballance,et al.  The Roman Bridges of the Via Flaminia , 1951, Papers of the British School at Rome.

[3]  F. Henderson Open channel flow , 1966 .

[4]  M Hee HYDRAULICS OF CULVERT DESIGN INCLUDING CONSTANT ENERGY CONCEPT , 1969 .

[5]  Gordon R. McKay Design of Minimum Energy Culverts , 1971 .

[6]  N H Cottman Fivefold increase obtained in the capacity of a small bridge by using a shaped minimum energy subway , 1976 .

[7]  T G Matthews,et al.  The history and development of minimum energy structures in water flow control , 1978 .

[8]  Greg McMahon The expansion characteristics of free surface flow , 1979 .

[9]  K F Porter Workshop on Minimum Energy Design of Culvert and Bridge Waterways, Australian Road Research Centre, Vermont South, Victoria, 6-7 December, 1978; proceedings , 1979 .

[10]  G R McKay DESIGN PRINCIPLES OF MINIMUM ENERGY WATERWAYS , 1979 .

[11]  C. J. Apelt Hydraulics of Minimum Energy Culverts and Bridge Waterways , 1981 .

[12]  Ad Gordon,et al.  The Behaviour of Lagoon Inlets , 1981 .

[13]  J. H. Loveless A Comparison of the Performance of Standard and Novel Culvert Designs Including the Effects of Sedimentation , 1984 .

[14]  Robert J. Houghtalen,et al.  HYDRAULIC DESIGN OF HIGHWAY CULVERTS , 1985 .

[15]  Susan Dumps,et al.  A model study. , 1988, Nursing standard (Royal College of Nursing (Great Britain) : 1987).

[16]  N H Cottman,et al.  BRIDGES AND CULVERTS REDUCED IN SIZE AND COST BY USE OF CRITICAL FLOW TRANSITIONS , 1990 .

[17]  A. D. Gordon,et al.  COASTAL LAGOON ENTRANCE DYNAMICS , 1991 .

[18]  Hubert Chanson,et al.  The hydraulics of open channel flow , 2004 .

[19]  Hubert Chanson Introducing originality and innovation in engineering teaching: The hydraulic design of culverts , 2000 .

[20]  Larry J. Weber,et al.  The Hydraulics of Open Channel Flow: An Introduction , 2001 .

[21]  H. CHANS,et al.  Introducing Originality and Innovation in Engineering Teaching: the Hydraulic Design of Culverts , 2001 .

[22]  Hubert Chanson Hydraulics of large culvert beneath Roman aqueduct of Nimes , 2002 .

[23]  Hubert Chanson,et al.  Hydraulics of a Large Culvert beneath the Roman Aqueduct of Nimes , 2002 .

[24]  Stephen E. Coleman,et al.  Overtopping Breaching of Noncohesive Homogeneous Embankments , 2002 .

[25]  Hubert Chanson Minimum Energy Loss Structures in Australia: Historical Development and Experience , 2003 .

[26]  Hubert Chanson Discussion of "Overtopping breaching of noncohesive homogeneous embankments" by Stephen E Coleman, Darryl P. Andrews, and M. Grant Webby , 2004 .

[27]  H. Chanson OVERTOPPING BREACHING OF NONCOHESIVE HOMOGENEOUS EMBANKMENTS - DISCUSSION ( 1 ) , 2004 .

[28]  M. Grant Webby,et al.  Discussion of ''Overtopping Breaching of Noncohesive Homogeneous Embankments'' by Stephen E. Coleman, , 2004 .