The behavior of a functionally graded origami structure subjected to quasi-static compression

[1]  Daining Fang,et al.  Out-of-plane compressive performance and energy absorption of multi-layer graded sinusoidal corrugated sandwich panels , 2019, Materials & Design.

[2]  Z. You,et al.  Dynamic in-plane compression of Miura-ori patterned metamaterials , 2019, International Journal of Impact Engineering.

[3]  Z. You,et al.  Quasi-static large deformation compressive behaviour of origami-based metamaterials , 2019, International Journal of Mechanical Sciences.

[4]  Richard S. Trask,et al.  Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities , 2019, Materials & Design.

[5]  D. Fang,et al.  Crushing behavior of multi-layer metal lattice panel fabricated by selective laser melting , 2018, International Journal of Mechanical Sciences.

[6]  Jiayao Ma,et al.  An origami-inspired structure with graded stiffness , 2018 .

[7]  Kon-Well Wang,et al.  Asymmetric energy barrier and mechanical diode effect from folding multi-stable stacked-origami , 2017 .

[8]  Soroush Kamrava,et al.  Origami-based cellular metamaterial with auxetic, bistable, and self-locking properties , 2017, Scientific Reports.

[9]  H. Ghariblu,et al.  Optimal shape design of functionally graded thickness inversion tubes subjected to oblique loading , 2017 .

[10]  Guangyong Sun,et al.  Crashworthiness analysis of octagonal multi-cell tube with functionally graded thickness under multiple loading angles , 2017 .

[11]  Xiaoping Zhou,et al.  Origami mechanical metamaterials based on the Miura-derivative fold patterns , 2016, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  Qing Li,et al.  On functionally graded composite structures for crashworthiness , 2015 .

[13]  Tomohiro Tachi,et al.  Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials , 2015, Proceedings of the National Academy of Sciences.

[14]  Xiaodong Huang,et al.  Comparison of functionally-graded structures under multiple loading angles , 2015 .

[15]  Guoxing Lu,et al.  Deformation of the Miura-ori patterned sheet , 2015 .

[16]  Joseph M. Gattas,et al.  Geometric assembly of rigid-foldable morphing sandwich structures , 2015 .

[17]  Jianguang Fang,et al.  Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets , 2015 .

[18]  Jinkyu Yang,et al.  Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability. , 2015, Physical review letters.

[19]  Thomas C. Hull,et al.  Origami structures with a critical transition to bistability arising from hidden degrees of freedom. , 2015, Nature materials.

[20]  G. Paulino,et al.  Unraveling metamaterial properties in zigzag-base folded sheets , 2015, Science Advances.

[21]  Thomas C. Hull,et al.  Using origami design principles to fold reprogrammable mechanical metamaterials , 2014, Science.

[22]  Goran Konjevod,et al.  Origami based Mechanical Metamaterials , 2014, Scientific Reports.

[23]  Qing Li,et al.  Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness , 2014 .

[24]  Z. You,et al.  Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries , 2013 .

[25]  Mohammad Mehrali,et al.  Dental implants from functionally graded materials. , 2013, Journal of biomedical materials research. Part A.

[26]  Fabrizio Scarpa,et al.  SILICOMB PEEK Kirigami cellular structures: mechanical response and energy dissipation through zero and negative stiffness , 2013 .

[27]  Yang Zhang,et al.  Design and preparation of high-performance alumina functional graded self-lubricated ceramic composites , 2013 .

[28]  Mark Schenk,et al.  Geometry of Miura-folded metamaterials , 2013, Proceedings of the National Academy of Sciences.

[29]  Levi H. Dudte,et al.  Geometric mechanics of periodic pleated origami. , 2012, Physical review letters.

[30]  Wan Abu Bakar Wan Abas,et al.  Development process of new bumper beam for passenger car: A review , 2012 .

[31]  A. Ajdari,et al.  Mechanical properties and energy absorption of heterogeneous and functionally graded cellular structures , 2011 .

[32]  Shiwei Zhou,et al.  Crashworthiness design for functionally graded foam-filled thin-walled structures , 2010 .

[33]  Wei Li,et al.  Bone remodeling induced by dental implants of functionally graded materials. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[34]  Michael D. Gilchrist,et al.  Designing the energy absorption capacity of functionally graded foam materials , 2009 .

[35]  Peter Schuster.  Current Trends in Bumper Design for Pedestrian Impact , 2006 .

[36]  H. S. Hedia.  Design of functionally graded dental implant in the presence of cancellous bone. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[37]  Wolfgang A. Kaysser,et al.  Functionally graded materials for sensor and energy applications , 2003 .

[38]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .