Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network

[1]  W. Zeng,et al.  Constitutive model of Ti17 titanium alloy with lamellar-type initial microstructure during hot deformation based on orthogonal analysis , 2014 .

[2]  Nitin Kotkunde,et al.  Comparative study of constitutive modeling for Ti–6Al–4V alloy at low strain rates and elevated temperatures , 2014 .

[3]  B. P. Kashyap,et al.  Modeling the hot working behavior of near-α titanium alloy IMI 834 , 2013 .

[4]  Jinghui Li,et al.  Hot deformation mechanism and microstructure evolution of a new near β titanium alloy , 2013 .

[5]  Zhengyi Jiang,et al.  Effects of hydrogen on the hot deformation behaviour of Ti-6Al-4V alloy: experimental and constitutive model studies , 2013 .

[6]  W. Zeng,et al.  Comparative study on constitutive relationship of as-cast Ti60 titanium alloy during hot deformation based on Arrhenius-type and artificial neural network models , 2013 .

[7]  H. Yang,et al.  Prediction of constitutive behavior and microstructure evolution in hot deformation of TA15 titanium alloy , 2013 .

[8]  A. Zarei‐Hanzaki,et al.  Flow behavior modeling of a Ti–6Al–7Nb biomedical alloy during manufacturing at elevated temperatures , 2013 .

[9]  Shengdun Zhao,et al.  Modeling the hot deformation behavior of Al alloy 3003 , 2013 .

[10]  A. Assadi,et al.  Generalized Constitutive-Based Theoretical and Empirical Models for Hot Working Behavior of Functionally Graded Steels , 2013, Metallurgical and Materials Transactions A.

[11]  X. J. Wang,et al.  Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2 μm SiCp reinforced Mg matrix composite , 2013 .

[12]  Tongsheng Deng,et al.  Constitutive modeling and microstructure change of Ti–6Al–4V during the hot tensile deformation , 2012 .

[13]  N. Haghdadi,et al.  Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy , 2012, Materials & Design.

[14]  Matthew S. Dargusch,et al.  Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network , 2012 .

[15]  Gokul Hariharan,et al.  Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network , 2012 .

[16]  Y. C. Lin,et al.  A phenomenological constitutive model for high temperature flow stress prediction of Al–Cu–Mg alloy , 2012 .

[17]  Hongying Li,et al.  Constitutive modeling for hot deformation behavior of T24 ferritic steel , 2012 .

[18]  Ali A. Roostaei,et al.  Constitutive base analysis of a 7075 aluminum alloy during hot compression testing , 2011 .

[19]  Yuanfei Han,et al.  Optimization of forging process parameters of Ti600 alloy by using processing map , 2011 .

[20]  Yuanfei Han,et al.  The influence of thermomechanical processing on microstructural evolution of Ti600 titanium alloy , 2011 .

[21]  H. Yang,et al.  Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution , 2011 .

[22]  A. Taheri,et al.  High temperature deformation and processing map of a NiTi intermetallic alloy , 2011 .

[23]  Cheng Guo,et al.  Constitutive modeling of hot deformation behavior of H62 brass , 2011 .

[24]  Zhenshan Cui,et al.  Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization , 2011 .

[25]  Jian-tao Liu,et al.  Hot compressive deformation behavior of a new hot isostatically pressed Ni–Cr–Co based powder metallurgy superalloy , 2011 .

[26]  Y. Lin,et al.  A critical review of experimental results and constitutive descriptions for metals and alloys in hot working , 2011 .

[27]  R. H. Wagoner,et al.  A plastic constitutive equation incorporating strain, strain-rate, and temperature , 2010 .

[28]  Jingwei Zhao,et al.  Influence of hydrogen content on hot deformation behavior and microstructural evolution of Ti600 alloy , 2010 .

[29]  Jiao Luo,et al.  Constitutive model for high temperature deformation of titanium alloys using internal state variables , 2010 .

[30]  Xiaoming He,et al.  A method to predict flow stress considering dynamic recrystallization during hot deformation , 2008 .

[31]  N. S. Reddy,et al.  Prediction of flow stress in Ti–6Al–4V alloy with an equiaxed α + β microstructure by artificial neural networks , 2008 .

[32]  Miaoquan Li,et al.  High temperature deformation behavior of a near alpha Ti600 titanium alloy , 2008 .

[33]  Baldev Raj,et al.  Artificial neural network modeling of composition–process–property correlations in austenitic stainless steels , 2008 .

[34]  Jue Zhong,et al.  Constitutive modeling for elevated temperature flow behavior of 42CrMo steel , 2008 .

[35]  R. Kazmi,et al.  Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys : Experiments and modeling over a wide range of strain-rates and temperatures , 2007 .

[36]  Wei Sha,et al.  Comment on “Prediction of the flow stress of 0.4C–1.9Cr–1.5Mn–1.0Ni–0.2Mo steel during hot deformation” by R.H. Wu et al. [J. Mater. Process. Technol. 116 (2001) 211] , 2006 .

[37]  Yeong Sung Suh,et al.  Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys , 2004 .

[38]  Kenan Genel,et al.  Modeling of tribological properties of alumina fiber reinforced zinc–aluminum composites using artificial neural network , 2003 .

[39]  Uday S. Dixit,et al.  Application of neural networks in generating processing map for hot working , 2003 .

[40]  K. P. Rao,et al.  Flow stress behavior and deformation characteristics of Ti-3Al-5V-5Mo compressed at elevated temperatures , 2002 .

[41]  H. J. McQueen,et al.  Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation , 2001 .

[42]  Y. Prasad,et al.  Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy , 2000 .

[43]  C. M. Sellars,et al.  Development of constitutive equations for modelling of hot rolling , 2000 .

[44]  H. Mcqueen,et al.  New method for determining sinh constitutive constants for high temperature deformation of 300 austenitic steels , 1992 .

[45]  Kurt Hornik,et al.  Multilayer feedforward networks are universal approximators , 1989, Neural Networks.

[46]  S. V. Sajadifar,et al.  Workability characteristics and mechanical behavior modeling of severely deformed pure titanium at high temperatures , 2014 .

[47]  Yu Sun,et al.  Characterization of the hot deformation behavior of a Ti–22Al–25Nb alloy using processing maps based on the Murty criterion , 2012 .

[48]  W. Sha,et al.  Modelling the correlation between processing parameters and properties of maraging steels using artificial neural network , 2004 .