Tri-generation System based on Municipal Waste Gasification, Fuel Cell and an Absorption Chiller

The present work focuses on the design of a novel tri-generation system based on gasification of municipal solid wastes, a solid oxide fuel cell and an ammonia-water absorption chiller. Tri-generation systems can be implemented in buildings such as hospitals and hotels, where there is a continuous and large demand for electricity, heating and cooling. The system is modelled in Aspen Plus and the influence of different operating parameters on the system performance was studied. The findings suggest that low air equivalent ratios and high gasification temperatures enhance the overall system performance. Syngas cleaning with metal sorbents zinc oxide and sodium bicarbonate for the removal of hydrogen sulfide and hydrogen chloride concentrations proved to be very effective, reducing the concentration of contaminants to < 1 ppm (part per million) levels. The possibility of covering the demand profiles of a specific building was also investigated: the system could fully meet the electricity and cooling demands, whereas the heat requirements could be satisfied only up to 55%. Moreover, assuming 20 years of operation, the payback period was 4.5 years and the net present value exceeded 5 million euros.

[1]  Ye Huang,et al.  Biomass Fuelled Trigeneration System in Selected Buildings , 2011 .

[2]  H. Auracher.  Thermal design and optimization , 1996 .

[3]  Isabel Malico,et al.  Design of a trigeneration system using a high‐temperature fuel cell , 2009 .

[4]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[5]  David Kennedy,et al.  Aspen plus simulation of biomass gasification in a steam blown dual fluidised bed , 2013 .

[6]  Yiping Dai,et al.  Thermodynamic analysis of a new combined cooling, heat and power system driven by solid oxide fuel cell based on ammonia–water mixture , 2011 .

[7]  C. S. Li,et al.  Physical and chemical composition of hospital waste. , 1993, Infection control and hospital epidemiology.

[8]  Alberto Traverso,et al.  Heat recovery options for onboard fuel cell systems , 2011 .

[9]  A. Einstein,et al.  Electricity from wood through the combination of gasification and solid oxide fuel cells , 2008 .

[10]  Alojz Poredoš,et al.  Economics of a trigeneration system in a hospital , 2006 .

[11]  S. Poskrobko,et al.  Production of ice water in a tri-generation centralized system , 2007 .

[12]  Fahad A. Al-Sulaiman,et al.  Trigeneration: A comprehensive review based on prime movers , 2011 .

[13]  Brian Elmegaard,et al.  Design and Optimization of an Integrated Biomass Gasification and Solid Oxide Fuel Cell System , 2010 .

[14]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[15]  David Kennedy,et al.  Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus , 2010 .

[16]  Marc Jerez Itarte.  Technoeconomy analysis of distinctive hybrid solid oxide fuel cells based power plants , 2015 .

[17]  R. G. Tated,et al.  Simulation of biomass gasification in downdraft gasifier for different biomass fuels using ASPEN PLUS , 2015, Clean Technologies and Environmental Policy.

[18]  Masoud Rokni,et al.  Integration of a municipal solid waste gasification plant with solid oxide fuel cell and gas turbine , 2013 .

[19]  Mohammad. Rasul,et al.  Performance analysis of an integrated fixed bed gasifier model for different biomass feedstocks , 2013 .

[20]  J. Y. Wu,et al.  Theoretical research of a silica gel–water adsorption chiller in a micro combined cooling, heating and power (CCHP) system , 2009 .

[21]  Umberto Arena,et al.  Process and technological aspects of municipal solid waste gasification. A review. , 2012, Waste management.

[22]  Eric Croiset,et al.  Simulation of a tubular solid oxide fuel cell stack using AspenPlusTM unit operation models , 2004 .

[23]  R. B. Slimane,et al.  ADVANCED SORBENT DEVELOPMENT PROGRAM; DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS , 2000 .

[24]  Christopher Michael Somers,et al.  SIMULATION OF ABSORPTION CYCLES FOR INTEGRATION INTO REFINING PROCESSES , 2009 .

[25]  Denilson Boschiero do Espirito Santo.  Performance evaluation of an electricity base load engine cogeneration system , 2009 .

[26]  L C Laurence,et al.  Syngas Treatment Unit for Small Scale Gasification - Application to IC Engine Gas Quality Requirement , 2012 .

[27]  B. Feng,et al.  A thermodynamic study of the removal of HCl and H2S from syngas , 2012, Frontiers of Chemical Science and Engineering.

[28]  A. Poredoš,et al.  The energy efficiency of chillers in a trigeneration plant , 2002 .

[29]  G De Feo,et al.  Energy from gasification of solid wastes. , 2003, Waste management.

[30]  Steven B. Kraines,et al.  CO2-emissions reduction potential and costs of a decentralized energy system for providing electricity, cooling and heating in an office-building in Tokyo , 2006 .

[31]  M. Florio.  Guide to cost-benefit analysis of investment projects : structural funds and instrument for pre-accession , 2008 .

[32]  Masoud Rokni,et al.  Thermodynamic analyses of municipal solid waste gasification plant integrated with solid oxide fuel cell and Stirling hybrid system , 2015 .