Realization of Electrically Small, Low-Profile Quasi-Isotropic Antenna Using 3D Printing Technology

A 3D printed, low-profile, electrically small antenna with a quasi-isotropic radiation pattern is presented herein. It is composed of an electric meandered dipole antenna, and the extended arcs from the meander line mimicking the current flow of the loop antenna. A quasi-isotropic radiation pattern is achieved from the total current flow over the proposed structure. Modern stereolithographic 3D printing and nano-polycrystalline copper coating technologies are used to build a prototype. The measured antenna exhibits a good uniformity in terms of the radiation pattern with a maximum gain deviation of 4.5 dB at 959 MHz and a radiation efficiency of 81 %, close to the computed expectations. The electrical size of the antenna <italic>ka</italic> is 0.48, and its height is <inline-formula> <tex-math notation="LaTeX">$\lambda _{0}$ </tex-math></inline-formula>/82.32.

[1]  S.R. Best,et al.  The effectiveness of space-filling fractal geometry in lowering resonant frequency , 2002, IEEE Antennas and Wireless Propagation Letters.

[2]  J. Nah,et al.  Investigation of 3-D Printed, Electrically Small, and Thin Magnetic Dipole Antenna , 2018, IEEE Antennas and Wireless Propagation Letters.

[3]  J. Chieh,et al.  Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology , 2014, IEEE Antennas and Wireless Propagation Letters.

[4]  Kam Eucharist Kedze,et al.  Effects of Split Position on the Performance of a Compact Broadband Printed Dipole Antenna with Split-Ring Resonators , 2019, Journal of Electromagnetic Engineering and Science.

[5]  Oleksiy S. Kim,et al.  Rapid Prototyping of Electrically Small Spherical Wire Antennas , 2014, IEEE Transactions on Antennas and Propagation.

[6]  Jong-Myung Woo,et al.  Design of a Small Radio Frequency Identification Tag Antenna Using a Corrugated Meander Line Applicable to a Drug Runout Sensor System , 2018 .

[7]  Zhenghe Feng,et al.  A Wideband Isotropic Radiated Planar Antenna Using Sequential Rotated L-Shaped Monopoles , 2014, IEEE Transactions on Antennas and Propagation.

[8]  Xue Jianbin,et al.  Comparison of Different Types of 3D Printing Technologies , 2018 .

[9]  Zhenghe Feng,et al.  Isotropic Radiation From a Compact Planar Antenna Using Two Crossed Dipoles , 2012, IEEE Antennas and Wireless Propagation Letters.

[10]  Ick-Jae Yoon,et al.  Investigation of 3D Printed Electrically Small Folded Spherical Meander Wire Antenna , 2017 .

[11]  B. Wiley,et al.  3D printing electronic components and circuits with conductive thermoplastic filament , 2017 .

[12]  Atef Z. Elsherbeni,et al.  3D Printed Dielectric Reflectarrays: Low-Cost High-Gain Antennas at Sub-Millimeter Waves , 2014, IEEE Transactions on Antennas and Propagation.

[13]  Sangwook Nam,et al.  A Compact Quasi-Isotropic Antenna Based on Folded Split-Ring Resonators , 2017, IEEE Antennas and Wireless Propagation Letters.

[14]  Geonyeong Shin,et al.  Electrically small folded spherical helix antennas using copper strips and 3D printing technology , 2016 .

[15]  Sungjoon Lim,et al.  Planar quasi‐isotropic antenna for drone communication , 2018 .

[16]  C. Tai,et al.  A new class of resonant antennas , 1991 .

[17]  J. Ouyang,et al.  An Electrically Small Planar Quasi-Isotropic Antenna , 2018, IEEE Antennas and Wireless Propagation Letters.

[18]  J. Romeu,et al.  Are space-filling curves efficient small antennas? , 2003, IEEE Antennas and Wireless Propagation Letters.

[19]  M. Tentzeris,et al.  Design and Development of a Novel 3-D Cubic Antenna for Wireless Sensor Networks (WSNs) and RFID Applications , 2009, IEEE Transactions on Antennas and Propagation.

[20]  Longyue Qu,et al.  Circularly Polarized Loop-Type Ground Radiation Antenna for IoT Applications , 2019, Journal of Electromagnetic Engineering and Science.

[21]  Atif Shamim,et al.  A Dual Band Additively Manufactured 3-D Antenna on Package With Near-Isotropic Radiation Pattern , 2018, IEEE Transactions on Antennas and Propagation.

[22]  Junji Yamauchi,et al.  Shortening ratios of modified dipole antennas , 1984 .