Model updating‐based automated damage detection of concrete‐encased composite column‐beam connections

[1]  Guido De Roeck,et al.  Dealing with uncertainty in model updating for damage assessment: A review , 2015 .

[2]  Ananth Ramaswamy,et al.  Finite element model updating of concrete structures based on imprecise probability , 2017 .

[3]  Sung-Han Sim,et al.  Data fusion of acceleration and angular velocity for improved model updating , 2016 .

[4]  Rui Calçada,et al.  Model updating of a dynamic model of a composite steel-concrete railway viaduct based on experimental tests , 2018, Engineering Structures.

[5]  Yonghui An,et al.  Experimental and numerical studies on model updating method of damage severity identification utilizing four cost functions , 2013 .

[6]  Paul Reynolds,et al.  Modal testing and dynamic FE model correlation and updating of a prototype high-strength concrete floor , 2003 .

[7]  Andreas Stavridis,et al.  Effects of variability in ambient vibration data on model updating and damage identification of a 10-story building , 2017 .

[8]  Ahmet Can Altunişik,et al.  Automated model updating of multiple cracked cantilever beams for damage detection , 2017 .

[9]  Dae Young Kim,et al.  Calibration of analytical models to assess wind-induced acceleration responses of tall buildings in serviceability level , 2009 .

[10]  Hyo Seon Park,et al.  A model updating method with strain measurement from impact test for the safety of steel frame structures , 2017 .

[11]  Qiusheng Li,et al.  Effects of amplitude-dependent damping and time constant on wind-induced responses of super tall building , 2007 .

[12]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[13]  Sheng Zhan,et al.  Field measurement, model updating, and response prediction of a large-scale straight-bladed vertical axis wind turbine structure , 2018, Measurement.

[14]  Hongping Zhu,et al.  Substructure based approach to finite element model updating , 2011 .

[15]  Rodrigo Astroza,et al.  Effects of model uncertainty in nonlinear structural finite element model updating by numerical simulation of building structures , 2018, Structural Control and Health Monitoring.

[16]  Guido De Roeck,et al.  Damage analysis of a steel–concrete composite frame by finite element model updating , 2010 .

[17]  XiaYong,et al.  Civil structure condition assessment by FE model updating , 2001 .

[18]  J. N. Eiras,et al.  Experimental modal analysis and finite element model updating for structural health monitoring of reinforced concrete radioactive waste packages , 2018, Construction and Building Materials.

[19]  Hong Hao,et al.  Civil structure condition assessment by FE model updating: methodology and case studies , 2001 .

[20]  Heung-Fai Lam,et al.  Bayesian structural model updating using ambient vibration data collected by multiple setups , 2017 .

[21]  Andrea Frangi,et al.  Vibration-based model updating of a timber frame structure , 2017 .

[22]  Luís F. Ramos,et al.  Integrating geomatic approaches, Operational Modal Analysis, advanced numerical and updating methods to evaluate the current safety conditions of the historical Bôco Bridge , 2018 .

[23]  Raimundo Delgado,et al.  Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters , 2012 .

[24]  E. I. Saavedra Flores,et al.  Multi-scale model updating for the mechanical properties of cross-laminated timber , 2016 .

[25]  Masoud Sanayei,et al.  Automated finite element model updating of full-scale structures with PARameter Identification System (PARIS) , 2014, Adv. Eng. Softw..

[26]  A. Altunışık,et al.  Experimental evaluation of damage effect on dynamic characteristics of concrete encased composite column-beam connections , 2018, Engineering Failure Analysis.

[27]  Sankaran Mahadevan,et al.  Uncertainty quantification in structural damage diagnosis , 2011 .

[28]  Hyung-Jo Jung,et al.  A new multi-objective approach to finite element model updating , 2014 .

[29]  Werner Lorenz,et al.  Vibration-based Model Updating and Identification of Multiple Axial Forces in Truss Structures , 2017 .

[30]  Ahmet E. Aktan,et al.  Limitations in Structural Identification of Large Constructed Structures , 2007 .

[31]  Natalia Sabourova,et al.  Sensitivity-based model updating for structural damage identification using total variation regularization , 2016, 1602.08137.

[32]  You-Lin Xu,et al.  Nonlinear model updating of a reinforced concrete pedestrian cable‐stayed bridge , 2019, Structural Control and Health Monitoring.

[33]  Rubén Boroschek,et al.  Operational modal analysis and FE model updating of the Metropolitan Cathedral of Santiago, Chile , 2017 .

[34]  Temel Türker,et al.  Investigation of restoration effects on the dynamic characteristics of the Hagia Sophia bell-tower by ambient vibration test , 2012 .

[35]  P. G. Bakir,et al.  Investigation of Uncertainty Changes in Model Outputs for Finite-Element Model Updating Using Structural Health Monitoring Data , 2014 .

[36]  Hyo Seon Park,et al.  Model updating method for damage detection of building structures under ambient excitation using modal participation ratio , 2019, Measurement.

[37]  Xijun Ye,et al.  Modal identification of Canton Tower under uncertain environmental conditions , 2012 .

[38]  Jun Shi,et al.  Experimental investigation into stressing state characteristics of large-curvature continuous steel box-girder bridge model , 2018, Construction and Building Materials.

[39]  Bojana V. Rosić,et al.  Model updating techniques for damage detection in concrete beam using optical fiber strain measurement device , 2016 .

[40]  A. Marra,et al.  Bayesian model updating of historic masonry towers through dynamic experimental data , 2017 .

[41]  Loris Vincenzi,et al.  Ambient vibration‐based finite element model updating of an earthquake‐damaged masonry tower , 2018 .

[42]  Sébastien MousseauS. Mousseau,et al.  Assessment of the frequency domain decomposition technique by forced-vibration tests of a full-scale structure , 2008 .

[43]  D. Cardone,et al.  Finite element model updating of base-isolated buildings using experimental results of in-situ tests , 2018, Soil Dynamics and Earthquake Engineering.

[44]  A. Altunışık,et al.  Non-destructive testing of an ancient Masonry Bastion , 2016 .

[45]  Hong-Gun Park,et al.  Design considerations for interior RC beam-column joint with additional bars , 2015 .

[46]  Eric M. Hernandez,et al.  Finite element model updating of semi-composite bridge decks using operational acceleration measurements , 2016 .

[47]  Jun Li,et al.  Structural damage identification based on autoencoder neural networks and deep learning , 2018, Engineering Structures.