Tool Path Generation for Turbine Blades Machining With Twin Tool

[1]  Chia-Hsiang Menq,et al.  Integrated planning for precision machining of complex surfaces. Part 1: Cutting-path and feedrate optimization , 1997 .

[2]  Shreyes N. Melkote,et al.  Machining fixture layout optimization using the genetic algorithm , 2000 .

[3]  Piyush Bubna,et al.  Selection of master cutter paths in sculptured surface machining by employing curvature principle , 2005 .

[4]  Chao Yao,et al.  Integrated analysis method of thin-walled turbine blade precise machining , 2015 .

[5]  Gregory C Loney,et al.  NC machining of free form surfaces , 1987 .

[6]  K. Marciniak,et al.  Influence of surface shape in admissible tool positions in 5-axis face milling , 1987 .

[7]  Yue Sun,et al.  Error prediction and compensation based on interference-free tool paths in blade milling , 2014 .

[8]  Yuan-Shin Lee Mathematical modelling using different endmills and tool placement problems for 4- and 5-axis NC complex surface machining , 1998 .

[9]  Ying Zhang,et al.  An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade , 2015, 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

[10]  Krishnan Suresh,et al.  Constant Scallop-height Machining of Free-form Surfaces , 1994 .

[11]  Chih-Ching Lo,et al.  Efficient cutter-path planning for five-axis surface machining with a flat-end cutter , 1999, Comput. Aided Des..

[12]  Yusuf Altintas,et al.  Mechanics and Dynamics of Ball End Milling , 1998 .

[13]  Svetan Ratchev,et al.  An advanced FEA based force induced error compensation strategy in milling , 2006 .

[14]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[15]  Nuodi Huang,et al.  5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement , 2014 .

[16]  Zhenyu Han,et al.  Cutting deflection control of the blade based on real-time feedrate scheduling in open modular architecture CNC system , 2017 .

[17]  Jian-Hua Yu,et al.  A control process for machining distortion by using an adaptive dual-sphere fixture , 2016 .

[18]  Dinghua Zhang,et al.  Research of Machining Vibration Restraint Method for Compressor Blade , 2016 .

[19]  Yuan-Shin Lee,et al.  Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining , 1998, Comput. Aided Des..

[20]  Jean-Pierre Kruth,et al.  Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces , 1994 .

[21]  Aristomenis Antoniadis,et al.  Influence of milling strategy on the surface roughness in ball end milling of the aluminum alloy Al7075-T6 , 2012 .

[22]  Taejung Kim,et al.  Toolpath generation along directions of maximum kinematic performance; a first cut at machine-optimal paths , 2002, Comput. Aided Des..

[23]  James H. Oliver,et al.  Non-constant parameter NC tool path generation on sculptured surfaces , 1994 .