3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties.

Hydrogel bioprinting is a major area of focus in the field of tissue engineering. However, 3D printed hydrogel scaffolds often suffer from low printing accuracy and poor mechanical properties because of their soft nature and tendency to shrink. This makes it challenging to process them into structural materials. In this study, natural chitosan hydrogel scaffolds were, for the first time, reinforced with milled silk particles and fabricated by 3D printing. Compared with pure chitosan scaffolds, the addition of silk particles resulted in up to a 5-fold increase in compressive modulus as well as significantly better printing accuracy and improved scaffold stability. The chitosan/silk inks flowed well during printing; loading of up to 300% silk (w/w) resulted in only minor changes in the rheological properties of the ink. Particle loading also enabled tuning of the surface roughness of the scaffolds and improved scaffolds' biodegradability. The printed composite hydrogel scaffolds showed no cytotoxicity and supported adherence and growth of human fibroblast cells.

[1]  Y. Mai,et al.  Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites , 2008 .

[2]  Hsin-Yi Lin,et al.  Crosslinked chitosan: its physical properties and the effects of matrix stiffness on chondrocyte cell morphology and proliferation. , 2005, Journal of biomedical materials research. Part A.

[3]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[4]  P. Janmey,et al.  Effects of substrate stiffness on cell morphology, cytoskeletal structure, and adhesion. , 2005, Cell motility and the cytoskeleton.

[5]  Esmaiel Jabbari,et al.  Material properties and osteogenic differentiation of marrow stromal cells on fiber-reinforced laminated hydrogel nanocomposites. , 2010, Acta biomaterialia.

[6]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[7]  Clifton A. Shook,et al.  The effect of particle shape on pipeline friction for newtonian slurries of fine particles , 2000 .

[8]  R. Muzzarelli,et al.  Chitosan chemistry : Relevance to the biomedical sciences , 2005 .

[9]  Yoshihito Osada,et al.  High Mechanical Strength Double‐Network Hydrogel with Bacterial Cellulose , 2004 .

[10]  P. Janmey,et al.  Tissue Cells Feel and Respond to the Stiffness of Their Substrate , 2005, Science.

[11]  Katja Schenke-Layland,et al.  Engineering of a bio-functionalized hybrid off-the-shelf heart valve. , 2014, Biomaterials.

[12]  David L Kaplan,et al.  Ingrowth of human mesenchymal stem cells into porous silk particle reinforced silk composite scaffolds: An in vitro study. , 2011, Acta biomaterialia.

[13]  A. Domb,et al.  Chitosan chemistry and pharmaceutical perspectives. , 2004, Chemical reviews.

[14]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[15]  David L. Kaplan,et al.  High-strength silk protein scaffolds for bone repair , 2012, Proceedings of the National Academy of Sciences.

[16]  I. Krieger,et al.  Rheological studies on sterically stabilized model dispersions of uniform colloidal spheres: II. Steady-shear viscosity , 1986 .

[17]  Hai-bin Wang,et al.  Promotion of cardiac differentiation of brown adipose derived stem cells by chitosan hydrogel for repair after myocardial infarction. , 2014, Biomaterials.

[18]  R. Dilley,et al.  TGF-α/HA complex promotes tympanic membrane keratinocyte migration and proliferation via ErbB1 receptor. , 2013, Experimental cell research.

[19]  Xungai Wang,et al.  Fabrication of ultrafine powder from eri silk through attritor and jet milling , 2009 .

[20]  Zhiqiang Chen,et al.  Short Oxygen Plasma Treatment Leading to Long-Term Hydrophilicity of Conductive PCL-PPy Nanofiber Scaffolds , 2017, Polymers.

[21]  Xungai Wang,et al.  Milled non-mulberry silk fibroin microparticles as biomaterial for biomedical applications. , 2015, International journal of biological macromolecules.

[22]  M. Mooney.  Explicit Formulas for Slip and Fluidity , 1931 .

[23]  S. Middleman,et al.  Power-Law Flow through a Packed Tube , 1965 .

[24]  Dong-Woo Cho,et al.  Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.

[25]  Ting Huang,et al.  A Novel Hydrogel with High Mechanical Strength: A Macromolecular Microsphere Composite Hydrogel , 2007 .

[26]  J. Kardos,et al.  Moduli of Crystalline Polymers Employing Composite Theory , 1972 .

[27]  Sanskrita Das,et al.  Enhanced redifferentiation of chondrocytes on microperiodic silk/gelatin scaffolds: toward tailor-made tissue engineering. , 2013, Biomacromolecules.

[28]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[29]  Pekka Pursula,et al.  3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels. , 2017, ACS applied materials & interfaces.

[30]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[31]  Miqin Zhang,et al.  Chitosan-based hydrogels for controlled, localized drug delivery. , 2010, Advanced drug delivery reviews.

[32]  Y. Seo,et al.  Tissue engineered scaffold utilizing the reinforced technique , 2010 .

[33]  M. Textor,et al.  Differential regulation of osteogenic differentiation of stem cells on surface roughness gradients. , 2014, Biomaterials.

[34]  Thomas J. Dougherty,et al.  A Mechanism for Non‐Newtonian Flow in Suspensions of Rigid Spheres , 1959 .

[35]  W. Hennink,et al.  Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. , 2007, Tissue engineering.

[36]  J. Ai,et al.  Synthesis, characterization and antioxidant activity of a novel electroactive and biodegradable polyurethane for cardiac tissue engineering application. , 2014, Materials science & engineering. C, Materials for biological applications.

[37]  Yi Hong,et al.  Covalently crosslinked chitosan hydrogel: properties of in vitro degradation and chondrocyte encapsulation. , 2007, Acta biomaterialia.

[38]  Tong Lin,et al.  Layer-by-layer assembly of antibacterial coating on interbonded 3D fibrous scaffolds and its cytocompatibility assessment. , 2012, Journal of biomedical materials research. Part A.

[39]  Barry J Doyle,et al.  Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting. , 2018, Journal of the mechanical behavior of biomedical materials.

[40]  Katja Schenke-Layland,et al.  ECM and ECM-like materials - Biomaterials for applications in regenerative medicine and cancer therapy. , 2016, Advanced drug delivery reviews.

[41]  Binil Starly,et al.  3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells. , 2016, ACS biomaterials science & engineering.

[42]  David L. Kaplan,et al.  Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications , 2008 .

[43]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[44]  Shingo Nakamura,et al.  Hydrogel blends of chitin/chitosan, fucoidan and alginate as healing-impaired wound dressings. , 2010, Biomaterials.