A novel severe plastic deformation method for manufacturing AZ31 magnesium alloy tube

[1]  Qiang Chen,et al.  Microstructure evolution of SiCp/ZM6 (Mg–Nd–Zn) magnesium matrix composite in the semi-solid state , 2016 .

[2]  Qiang Chen,et al.  Effect of accumulative plastic deformation on generation of spheroidal structure, thixoformability and mechanical properties of large-size AM60 magnesium alloy , 2015 .

[3]  Y. Y. Li,et al.  Effects of channel angles on extrusion-shear for AZ31 magnesium alloy: modeling and experiments , 2015 .

[4]  Yunyang Li,et al.  Researches on physical field evolution of micro-cutting of steel H13 by micron scale ceramic cutter based on finite element modeling , 2015 .

[5]  H. Wang,et al.  The influences of shear deformation on the evolutions of the extrusion shear for magnesium alloy , 2014 .

[6]  G. Faraji,et al.  Mechanical and Microstructural Properties of Ultra-fine Grained AZ91 Magnesium Alloy Tubes Processed via Multi Pass Tubular Channel Angular Pressing (TCAP) , 2014 .

[7]  Qiang Chen,et al.  Comparisons of microstructure, thixoformability and mechanical properties of high performance wrought magnesium alloys reheated from the as-cast and extruded states , 2014 .

[8]  C. Gür,et al.  Investigating the formation of intermetallic compounds during friction stir welding of magnesium alloy to aluminum alloy in air and under liquid nitrogen , 2014 .

[9]  Weijiu Huang,et al.  Effects of turning speed on high-speed turning by ultrafine-grained ceramic tool based on 3D finite element method and experiments , 2013 .

[10]  Shang-yu Huang,et al.  Analysis of the bulging process of an AZ31B magnesium alloy sheet with a uniform pressure coil , 2013 .

[11]  H–J. Hu,et al.  Studies on wears of ultrafine-grained ceramic tool and common ceramic tool during hard turning using Archard wear model , 2013 .

[12]  V. Balasubramanian,et al.  Friction stir welding of AZ61A magnesium alloy , 2013 .

[13]  Qiang Chen,et al.  Microstructure development and thixoextrusion of magnesium alloy prepared by repetitive upsetting-extrusion , 2011 .

[14]  Dmitry Orlov,et al.  Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing , 2011 .

[15]  Qiang Chen,et al.  Microstructural evolution and tensile mechanical properties of thixoforged ZK60-Y magnesium alloys produced by two different routes , 2010 .

[16]  Dingfei Zhang,et al.  Numerical and physical simulation of new SPD method combining extrusion and equal channel angular pressing for AZ31 magnesium alloy , 2010 .

[17]  T. Kumar,et al.  Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation , 2009 .

[18]  T. Langdon,et al.  The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys. , 2007 .

[19]  J. Duszczyk,et al.  Finite Element Simulation of Magnesium Extrusion to Manufacture a Cross-Shaped Profile , 2007 .

[20]  Mark A.M. Bourke,et al.  Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion , 2004 .

[21]  Margam Chandrasekaran,et al.  Effect of materials and temperature on the forward extrusion of magnesium alloys , 2004 .

[22]  T. Langdon,et al.  Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP , 2003 .