Resistive switching induced by metallic filaments formation through poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate).

We report the design and fabrication of Al/poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/Cu resistive memory devices that utilize the Cu redox reaction and conformational features of PEDOT:PSS to achieve resistive switching. The top Cu electrode acts as the source of the redox ions that are injected through the PEDOT:PSS layer during the forming process. The Cu filament is confirmed directly using the cross-sectional images of transmission electron microscopy and energy-dispersive X-ray spectroscopy. The resultant resistive memory devices can operate over a small voltage range, i.e., the switching-on threshold voltage is less than 1.5 V and the absolute value of the switching-off threshold voltage is less than 1.0 V. The on/off current ratio is as large as 1 × 10(4) and the two different resistance states can be maintained over 10(6) s. Moreover, the devices present good thermal stability that the resistive switching can be observed even at temperature up to 160 °C, at which the oxidation of the Cu top electrode is the failure factor. Furthermore, the cause of failure for Al/PEDOT:PSS/Cu memory devices at higher temperature is confirmed to be the oxidation of Cu top electrode.

[1]  Won-Jae Joo,et al.  Metal filament growth in electrically conductive polymers for nonvolatile memory application. , 2006, The journal of physical chemistry. B.

[2]  Ohyun Kim,et al.  Bipolar switching characteristics of nonvolatile memory devices based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) thin film , 2008 .

[3]  Sang-Hyun Hong,et al.  Novel Digital Nonvolatile Memory Devices Based on Semiconducting Polymer Thin Films , 2007 .

[4]  Yan Wang,et al.  Electrical breakdown of nanowires. , 2011, Nano letters.

[5]  Dong Min Kim,et al.  High temperature polyimide containing anthracene moiety and its structure, interface, and nonvolatile memory behavior. , 2011, ACS Applied Materials and Interfaces.

[6]  K. Terabe,et al.  Quantized conductance atomic switch , 2005, Nature.

[7]  Yuchao Yang,et al.  Bipolar resistive switching in Cu/AlN/Pt nonvolatile memory device , 2010 .

[8]  S. Kirchmeyer,et al.  Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene) , 2005 .

[9]  F. Zeng,et al.  Fully room-temperature-fabricated nonvolatile resistive memory for ultrafast and high-density memory application. , 2009, Nano letters.

[10]  W. Lu,et al.  CMOS compatible nanoscale nonvolatile resistance switching memory. , 2008, Nano letters.

[11]  Dong Min Kim,et al.  Programmable permanent data storage characteristics of nanoscale thin films of a thermally stable aromatic polyimide. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[12]  R. Muller,et al.  Polymer and Organic Nonvolatile Memory Devices , 2011 .

[13]  Yuchao Yang,et al.  Bipolar resistance switching in high-performance Cu/ZnO:Mn/Pt nonvolatile memories: active region and influence of Joule heating , 2010 .

[14]  S. Menzel,et al.  Understanding the switching-off mechanism in Ag+ migration based resistively switching model systems , 2007 .

[15]  S. Möller,et al.  A polymer/semiconductor write-once read-many-times memory , 2003, Nature.

[16]  Changqing Xie,et al.  Organic nonpolar nonvolatile resistive switching in poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate thin film , 2009 .

[17]  Noa Oded,et al.  Polymeric memory elements and logic circuits that store multiple bit states. , 2010, ACS applied materials & interfaces.

[18]  J. Yang,et al.  Memristive switching mechanism for metal/oxide/metal nanodevices. , 2008, Nature nanotechnology.

[19]  T. Hasegawa,et al.  Nanometer-scale switches using copper sulfide , 2003 .

[20]  J. C. Scott,et al.  Nonvolatile Memory Elements Based on Organic Materials , 2007 .

[21]  H. Hwang,et al.  Resistive switching characteristics of polymer non-volatile memory devices in a scalable via-hole structure , 2009, Nanotechnology.

[22]  Won-Jae Joo,et al.  Study on threshold behavior of operation voltage in metal filament-based polymer memory. , 2007, The journal of physical chemistry. B.

[23]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[24]  Y. Yeo,et al.  Injection‐induced De‐doping in a Conducting Polymer during Device Operation: Asymmetry in the Hole Injection and Extraction Rates , 2007 .

[25]  W. Xu,et al.  Resistive Switching and Memory Effect Based on CuSCN Complex Layer Created Through Interface Reactions , 2009 .

[26]  Hyunsang Hwang,et al.  Nanoscale Resistive Switching of a Copper–Carbon-Mixed Layer for Nonvolatile Memory Applications , 2009, IEEE Electron Device Letters.

[27]  Masakazu Aono,et al.  A Polymer‐Electrolyte‐Based Atomic Switch , 2011 .

[28]  Yuchao Yang,et al.  Reproducible and controllable organic resistive memory based on Al/poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate)/Al structure , 2010 .

[29]  G. I. Meijer,et al.  Who Wins the Nonvolatile Memory Race? , 2008, Science.

[30]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[31]  R. Waser,et al.  Nanoionics-based resistive switching memories. , 2007, Nature materials.

[32]  D Prime,et al.  Overview of organic memory devices , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[33]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[34]  O. Inganäs,et al.  Supramolecular Self-Assembly for Enhanced Conductivity in Conjugated Polymer Blends: Ionic Crosslinking in Blends of Poly(3,4-ethylenedioxythiophene)-Poly(styrenesulfonate) and Poly(vinylpyrrolidone) , 1998 .