Characterization of the gas sensors based on polymer-coated resonant microcantilevers for the detection of volatile organic compounds.

The gas sensors based on polymer-coated resonant microcantilevers for volatile organic compounds (VOCs) detection are investigated. A method to characterize the gas sensors through sensor calibration is proposed. The expressions for the estimation of the characteristic parameters are derived. The effect of the polymer coating location on the sensor's sensitivity is investigated and the formula to calculate the polymer-analyte partition coefficient without knowing the polymer coating features is presented for the first time. Three polymers: polyethyleneoxide (PEO), polyethylenevinylacetate (PEVA) and polyvinylalcohol (PVA) are used to perform the experiments. Six organic solvents: toluene, benzene, ethanol, acetone, hexane and octane are used as analytes. The response time, reversibility, hydrophilicity, sensitivity and selectivity of the polymer layers are discussed. According to the results, highly sensitive sensors for each of the analytes are proposed. Based on the characterization method, a convenient and flexible way to the construction of electric nose system by the polymer-coated resonant microcantilevers can be achieved.

[1]  Udo Weimar,et al.  Detection of volatile organic compounds (VOCs) with polymer-coated cantilevers , 1999 .

[2]  Christiane Ziegler,et al.  Cantilever-based biosensors , 2004, Analytical and bioanalytical chemistry.

[3]  H. T. Nagle,et al.  Handbook of Machine Olfaction , 2002 .

[4]  Peter Vettiger,et al.  A chemical sensor based on a micromechanical cantilever array for the identification of gases and vapors , 1998 .

[5]  Olivier Français,et al.  Chemical sensing: millimeter size resonant microcantilever performance , 2004 .

[6]  Martin Hegner,et al.  Rapid functionalization of cantilever array sensors by inkjet printing , 2004 .

[7]  Rashid Bashir,et al.  BioMEMS: state-of-the-art in detection, opportunities and prospects. , 2004, Advanced drug delivery reviews.

[8]  J. Grate,et al.  Solubility interactions and the design of chemically selective sorbent coatings for chemical sensors and arrays , 1991 .

[9]  Panos G. Datskos,et al.  Selectivity of chemical sensors based on micro-cantilevers coated with thin polymer films , 2000 .

[10]  Udo Weimar,et al.  Multicomponent analysis and prediction with a cantilever array based gas sensor , 2001 .

[11]  Udo Weimar,et al.  Fabrication and application of polymer coated cantilevers as gas sensors , 1999 .

[12]  W. G. Delinger,et al.  Gas sensing using embedded piezoresistive microcantilever sensors , 2004 .

[13]  M. Grattarola,et al.  Micromechanical cantilever-based biosensors , 2001 .

[14]  J. R. Stetter,et al.  Understanding Chemical Sensors and Chemical Sensor Arrays (Electronic Noses): Past, Present, and Future , 2002 .

[15]  D. Lange,et al.  CMOS Cantilever Sensor Systems: Atomic Force Microscopy and Gas Sensing Applications , 2002 .

[16]  James K. Gimzewski,et al.  A chemical sensor based on a microfabricated cantilever array with simultaneous resonance-frequency and bending readout , 2001 .

[17]  José Pedro Santos,et al.  Micromachined silicon microcantilevers for gas sensing applications with capacitive read-out , 2005 .

[18]  James K. Gimzewski,et al.  An artificial nose based on a micromechanical cantilever array , 1999 .

[19]  Panos G. Datskos,et al.  Analyte species and concentration identification using differentially functionalized microcantilever arrays and artificial neural networks , 2006 .

[20]  J W Gardner and P N Bartlett,et al.  Electronic Noses: Principles and Applications , 1999 .

[21]  A. Hierlemann,et al.  Complementary metal oxide semiconductor cantilever arrays on a single chip: mass-sensitive detection of volatile organic compounds. , 2002, Analytical chemistry.

[22]  Laura M. Lechuga,et al.  Nanomechanical biosensors: a new sensing tool , 2006 .

[23]  Udo Weimar,et al.  Parallel frequency readout of an array of mass-sensitive transducers for sensor applications , 2000 .

[24]  A. Hierlemann.  Integrated chemical microsensor systems in CMOS-technology , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[25]  B. Snopok,et al.  Multisensor systems for chemical analysis: state-of-the-art in Electronic Nose technology and new trends in machine olfaction , 2002 .

[26]  Dominique Rebière,et al.  Silicon made resonant microcantilever: Dependence of the chemical sensing performances on the sensitive coating thickness , 2006 .

[27]  M. Sepaniak,et al.  Cantilever transducers as a platform for chemical and biological sensors , 2004 .

[28]  Arun Majumdar,et al.  Bioassays Based on Molecular Nanomechanics , 2003, Disease markers.

[29]  C. Ziegler,et al.  A highly sensitive self-oscillating cantilever array for the quantitative and qualitative analysis of organic vapor mixtures , 2006 .