Design of a low-cost and compact 1 × 5 wavelength-selective switch for access networks.

This paper describes the design, modeling, construction, and testing of a low-cost and compact (80  mm×50  mm) 1×5 wavelength-selective switch. The core beam-deflecting element of the switch is a nematic liquid crystal on silicon spatial light modulator. The switch is designed for coarse wavelength-division multiplexing wavelengths in order to bring the benefit of a low-cost, compact, and robust switching design toward the customer end in the access network. During the system development stage, a single optomechanical assembly was designed and prototyped using the three-dimensional printing technology. The experimental results show an insertion loss of -13.8±1.4  dB and a worst-case scenario crosstalk level of -24.8  dB. Approaches for enhancing the performance of the switch are analyzed and discussed.

[1]  B. Robertson,et al.  Origin of Transient Crosstalk and Its Reduction in Phase-only LCOS Wavelength Selective Switches , 2013, Journal of Lightwave Technology.

[2]  T J Cloonan,et al.  Five-stage free-space optical switching network with field-effect transistor self-electro-optic-effect-device smart-pixel arrays. , 1994, Applied optics.

[3]  Leonid G. Kazovsky,et al.  Next Generation Optical Access Networks , 2006, 2006 3rd International Conference on Broadband Communications, Networks and Systems.

[4]  G A Russell,et al.  Free-space optical interconnected topologies for parallel computer application and experimental implementation using rapid prototyping techniques , 2006 .

[5]  Timothy D. Wilkinson,et al.  Telecommunications applications of ferroelectric liquid-crystal smart pixels , 1996 .

[6]  N Collings,et al.  High Quality Assembly of Phase-Only Liquid Crystal on Silicon (LCOS) Devices , 2011, Journal of Display Technology.

[7]  Carmen Mas Machuca,et al.  Cost vs. reliability performance study of fiber access network architectures , 2010, IEEE Communications Magazine.

[8]  Ji’an Duan,et al.  Evaluation of Mode Field Diameter of Step-Index Fibers and Comparison Analysis , 2013 .

[9]  Glen Kramer,et al.  Wavelength-division-multiplexed passive optical network (WDM-PON) technologies for broadband access: a review (Invited) , 2005 .

[10]  D.T. Neilson,et al.  Wavelength-selective 1/spl times/K switches using free-space optics and MEMS micromirrors: theory, design, and implementation , 2005, Journal of Lightwave Technology.

[11]  R. Yadav.  Passive-optical-network- (PON-) based converged access network [Invited] , 2012, IEEE/OSA Journal of Optical Communications and Networking.

[12]  Siegfried Janz,et al.  Compact and low power thermo-optic switch using folded silicon waveguides. , 2009, Optics express.

[13]  M. T. Gale.  Replication techniques for diffractive optical elements , 1997 .

[14]  N. Collings,et al.  The Applications and Technology of Phase-Only Liquid Crystal on Silicon Devices , 2011, Journal of Display Technology.

[15]  M.C. Wu,et al.  1/spl times/N/sup 2/ wavelength-selective switch with two cross-scanning one-axis analog micromirror arrays in a 4-f optical system , 2006, Journal of Lightwave Technology.

[16]  D. G. Vass,et al.  Evolutionary development of advanced liquid crystal spatial light modulators. , 1989, Applied optics.

[17]  Madeleine Glick,et al.  Optical local area networking using CWDM , 2003, SPIE ITCom.

[18]  Brian Robertson,et al.  Adaptive beam steering implemented in a ferroelectric liquid-crystal spatial-light-modulator free-space, fiber-optic switch. , 2002, Applied optics.

[19]  W H Steier.  The ray packet equivalent of a Gaussian light beam. , 1966, Applied optics.

[20]  Magnus Pålsson,et al.  Fundamental-mode fiber-to-fiber coupling at high-power , 2009, LASE.

[21]  Leonid G. Kazovsky,et al.  Challenges in next-generation optical access networks: addressing reach extension and security weaknesses , 2011 .

[22]  Brian Robertson,et al.  Pixel-level fringing-effect model to describe the phase profile and diffraction efficiency of a liquid crystal on silicon device. , 2015, Applied optics.

[23]  Thomas A. Strasser,et al.  ROADMS Unlock the Edge of the Network , 2008, IEEE Communications Magazine.

[24]  T. Strasser,et al.  Wavelength-Selective Switches for ROADM Applications , 2010, IEEE Journal of Selected Topics in Quantum Electronics.

[25]  N. Collings,et al.  The Silicon Backplane Design for an LCOS Polarization-Insensitive Phase Hologram SLM , 2008, IEEE Photonics Technology Letters.

[26]  Neil Hopkinson,et al.  Materials for high speed sintering , 2014 .

[27]  Z. You,et al.  Fundamentals of phase-only liquid crystal on silicon (LCOS) devices , 2014, Light: Science & Applications.

[28]  W. Crossland,et al.  Demonstration of Multi-Casting in a 1 × 9 LCOS Wavelength Selective Switch , 2014, Journal of Lightwave Technology.

[29]  Steve Serati,et al.  Liquid crystal spatial light modulator for multispot beam steering , 2004, SPIE Optics + Photonics.

[30]  W. Crossland,et al.  Liquid crystal over silicon device characteristics for holographic projection of high-definition television images. , 2008, Applied optics.

[31]  W. Crossland,et al.  Holographic optical switching: the "ROSES" demonstrator , 2000, Journal of Lightwave Technology.

[32]  Rong Zhang,et al.  A compensation method for the full phase retardance nonuniformity in phase-only liquid crystal on silicon spatial light modulators. , 2014, Optics express.