论文信息 - Design of a scalable trailing edge of morphing wings

Design of a scalable trailing edge of morphing wings

A networking mechanism was designed based on scalable trailing edge to satisfy the requirements of morphing wings. By this way, we can increase the lift coefficient and the aerodynamic efficiency of the aircraft in the process of taking off and landing. We use Lagrange equations to set up the system dynamics model. Simulation results by Simulink and Fluent show that the whole system can realize the flexible curved transition and the system itself has good scalability. And it will have better improvement on the aerodynamic performance of the aircraft.

Bing Li | Gang Li | Hefei Wang

[1] Sridhar Kota,et al. Static Shape Control of Smart Structures Using Compliant Mechanisms , 1999 .

[2] René Motro,et al. Investigation of minimal forms with density methods , 1997 .

[3] M. Bendsøe,et al. Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[4] J. Rossi,et al. ACTIVE RIB EXPERIMENT FOR SHAPE CONTROL OF AN ADAPTIVE WING , 1993 .

[5] E Stanewsky,et al. Adaptive wing and flow control technology , 2001 .

[6] Y. Xie,et al. A simple evolutionary procedure for structural optimization , 1993 .

[7] John Hodgkinson,et al. Flight Test of the F/A-18 Active Aeroelastic Wing Airplane , 2013 .

[8] Christopher A. Martin,et al. Contributions of the NASA Langley Research Center to the DARPA/AFRL/NASA/ Northrop Grumman Smart Wing Program , 2003 .

[9] Gareth J. Knowles,et al. Static shape control for adaptive wings , 1994 .

[10] M. Frese. The internal structure and dynamics of the railgun plasma armature between infinitely wide ablating rails , 1991 .

[11] Hans Peter Monner,et al. Realization of an optimized wing camber by using formvariable flap structures , 2001 .