Special issue: Sustainable thermal energy management in the process industries international conference (SusTEM2011)

[1]  Carl-Erik Grip,et al.  Process integration. Tests and application of different tools on an integrated steelmaking site , 2013 .

[2]  Anthony John Griffiths,et al.  Effect of exhaust confinement and fuel type upon the blowoff limits and fuel switching ability of swirl combustors , 2012 .

[3]  Guohong Tian,et al.  Exergy efficiency enhancement of MSF desalination by heat recovery from hot distillate water stages , 2013 .

[4]  Xiaohui Zhang,et al.  Modelling and mapping sustainable heating for cities , 2013 .

[5]  C. W. Chan,et al.  A review of chemical heat pumps, thermodynamic cycles and thermal energy storage technologies for low grade heat utilisation , 2013 .

[6]  Christos N. Markides,et al.  The role of pumped and waste heat technologies in a high-efficiency sustainable energy future for the UK , 2013 .

[7]  Mark Worall,et al.  An experimental investigation into the integration of a jet-pump refrigeration cycle and a novel jet-spay thermal ice storage system , 2013 .

[8]  Antonis Papachristodoulou,et al.  Analysis and control design of sustainable policies for greenhouse gas emissions , 2013 .

[9]  Zheng Li,et al.  An engineering approach to the optimal design of distributed energy systems in China , 2013 .

[10]  Yuying Yan,et al.  A potential candidate for the sustainable and reliable domestic energy generation–Thermoelectric cogeneration system , 2013 .

[11]  Yaodong Wang,et al.  Modelling and simulation of a distributed power generation system with energy storage to meet dynamic household electricity demand , 2013 .

[12]  Dermot J. Roddy,et al.  A syngas network for reducing industrial carbon footprint and energy use , 2013 .

[13]  Andrew Hopkins,et al.  Thermal distributive blast furnace gas characterisation, a steelworks case study , 2013 .

[14]  D McIlveen-Wright,et al.  A techno-economic assessment of biomass fuelled trigeneration system integrated with organic Rankine cycle , 2013 .

[15]  Anthony Paul Roskilly,et al.  Opportunities and barriers for efficient energy use in a medium-sized brewery , 2013 .

[16]  Conor J. Walsh,et al.  A comparison of two low grade heat recovery options , 2011 .

[17]  Jie Zhang,et al.  Analysis of recoverable exhaust energy from a light-duty gasoline engine , 2013 .

[18]  Christos N. Markides,et al.  Thermodynamic analysis of pumped thermal electricity storage , 2013 .

[19]  Igor Bulatov,et al.  Optimisation for the retrofit of large scale heat exchanger networks with different intensified heat transfer techniques , 2013 .

[20]  Vassili Toropov,et al.  Thermal energy management in the bread baking industry using a system modelling approach , 2013 .

[21]  Conor J. Walsh,et al.  Desalination using low grade heat in the process industry: challenges and perspectives. , 2012 .

[22]  Hong-Qi Li,et al.  Current situations and technical development of energy-savings in China refrigeration industries , 2013 .

[23]  David Reay,et al.  Opportunities for low-grade heat recovery in the UK food processing industry , 2013 .

[24]  Phil Coates,et al.  Thermal optimisation of polymer extrusion using in-process monitoring techniques , 2013 .

[25]  Yi Chen,et al.  Evaluation of low grade heat transport in the process industry using absorption processes , 2013 .

[26]  Savvas A. Tassou,et al.  Analysis and simulation of continuous food frying processes , 2013 .

[27]  Christos N. Markides,et al.  The role of heat exchange on the behaviour of an oscillatory two-phase low-grade heat engine , 2013 .

[28]  Raya Al-Dadah,et al.  Effects of contact resistance and metal additives in finned-tube adsorbent beds on the performance of silica gel/water adsorption chiller , 2013 .

[29]  Tianshu Ge,et al.  The present and future of residential refrigeration, power generation and energy storage , 2013 .