Estimating Direct-to-Reverberant Energy Ratio Using D/R Spatial Correlation Matrix Model

We present a method for estimating the direct-to-reverberant energy ratio (DRR) that uses a direct and reverberant sound spatial correlation matrix model (Hereafter referred to as the spatial correlation model). This model expresses the spatial correlation matrix of an array input signal as two spatial correlation matrices, one for direct sound and one for reverberation. The direct sound propagates from the direction of the sound source but the reverberation arrives from every direction uniformly. The DRR is calculated from the power spectra of the direct sound and reverberation that are estimated from the spatial correlation matrix of the measured signal using the spatial correlation model. The results of experiment and simulation confirm that the proposed method gives mostly correct DRR estimates unless the sound source is far from the microphone array, in which circumstance the direct sound picked up by the microphone array is very small. The method was also evaluated using various scales in simulated and actual acoustical environments, and its limitations revealed. We estimated the sound source distance using a small microphone array, which is an example of application of the proposed DRR estimation method.

[1]  Sampo Vesa,et al.  Sound Source Distance Learning Based on Binaural Signals , 2007, 2007 IEEE Workshop on Applications of Signal Processing to Audio and Acoustics.

[2]  Don H. Johnson,et al.  Array Signal Processing: Concepts and Techniques , 1993 .

[3]  P. Holmberg.  Ultrasonic sensor array for position and rotation estimates of planar surfaces , 1994 .

[4]  Martin Cooke,et al.  Binaural Estimation of Sound Source Distance via the Direct-to-Reverberant Energy Ratio for Static and Moving Sources , 2010, IEEE Transactions on Audio, Speech, and Language Processing.

[5]  Qp. Bronkhorst,et al.  MODELING AUDITORY DISTANCE PERCEPTION IN ROOMS , 2002 .

[6]  Tiago H. Falk,et al.  Temporal Dynamics for Blind Measurement of Room Acoustical Parameters , 2010, IEEE Transactions on Instrumentation and Measurement.

[7]  Hideo Suzuki,et al.  The nature and technology of acoustic space , 1995 .

[8]  A. Bronkhorst,et al.  Auditory distance perception in humans : A summary of past and present research , 2005 .

[9]  Søren H. Nielsen,et al.  Auditory Distance Perception in Different Rooms , 1993 .

[10]  B.C. Wheeler,et al.  Acoustic scene analysis using estimated impulse responses , 2003, The Thrity-Seventh Asilomar Conference on Signals, Systems & Computers, 2003.

[11]  Tammo Houtgast,et al.  Auditory distance perception in rooms , 1999, Nature.

[12]  Marc Moonen,et al.  Design of far-field and near-field broadband beamformers using eigenfilters , 2003, Signal Process..

[13]  Heinrich Kuttruff,et al.  Room acoustics , 1973 .

[14]  Sampo Vesa,et al.  Binaural Sound Source Distance Learning in Rooms , 2009, IEEE Transactions on Audio, Speech, and Language Processing.

[15]  Arun Ross,et al.  Microphone Arrays , 2009, Encyclopedia of Biometrics.

[16]  Maurizio Omologo,et al.  Use of the crosspower-spectrum phase in acoustic event location , 1997, IEEE Trans. Speech Audio Process..

[17]  Pavel Zahorik,et al.  Direct-to-reverberant energy ratio sensitivity. , 2002, The Journal of the Acoustical Society of America.

[18]  Jont B. Allen,et al.  Image method for efficiently simulating small‐room acoustics , 1976 .

[19]  H. Asoh,et al.  Sound Source Localization and Separation in Near Field , 2000 .

[20]  Pavel Zahorik,et al.  Assessing auditory distance perception using virtual acoustics. , 2002, The Journal of the Acoustical Society of America.

[21]  Yusuke Hioka,et al.  Estimating direct-to-reverberant energy ratio based on spatial correlation model segregating direct sound and reverberation , 2010, 2010 IEEE International Conference on Acoustics, Speech and Signal Processing.