Unitised regenerative fuel cells in solar-hydrogen systems for remote area power supply

Remote area power supply (RAPS) is a potential early market for renewable energy - hydrogen systems because of the relatively high costs of conventional energy sources in remote regions. Solar-hydrogen RAPS systems commonly employ photovoltaic panels, a P

[1]  Peter Lund,et al.  Optimization of stand-alone photovoltaic systems with hydrogen storage for total energy self-sufficiency , 1991 .

[2]  S. Srinivasan,et al.  Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part I. Fundamental scientific aspects , 2001 .

[3]  K. Yasuda,et al.  Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells , 2002 .

[4]  F. Barbir.  PEM electrolysis for production of hydrogen from renewable energy sources , 2005 .

[5]  Aliakbar Akbarzadeh,et al.  Solar hydrogen systems for remote area power supply from triple bottom line prospective , 2005 .

[6]  Zongqiang Mao,et al.  Deposited RuO2–IrO2/Pt electrocatalyst for the regenerative fuel cell , 2007 .

[7]  Pierre Millet,et al.  Solid polymer electrolyte water electrolysis: electrocatalysis and long-term stability , 1994 .

[8]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[9]  John W. Weidner,et al.  Electrochemical hydrogen production from thermochemical cycles using a proton exchange membrane electrolyzer , 2007 .

[10]  Shimshon Gottesfeld,et al.  Characterization of polymer electrolytes for fuel cell applications , 1993 .

[11]  Suhaib Muhammad Ali,et al.  Low-cost storage options for solar hydrogen systems for remote area power supply , 2006 .

[12]  H. Dhar,et al.  A unitized approach to regenerative solid polymer electrolyte fuel cells , 1993 .

[13]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[14]  Ursula Wittstadt,et al.  Membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells , 2005 .

[15]  Angelika Heinzel,et al.  Development of electrode/membrane units for the reversible solid polymer fuel cell (RSPFC) , 1995 .

[16]  Wan Ramli Wan Daud,et al.  Challenges and future developments in proton exchange membrane fuel cells , 2006 .

[17]  T. Schucan,et al.  Case Studies of integrated hydrogen systems. International Energy Agency Hydrogen Implementing Agreement, Final report for Subtask A of task 11 - Integrated Systems , 1999 .

[18]  P. Lehman,et al.  Operating experience with a photovoltaic-hydrogen energy system , 1997 .

[19]  Kenneth A. Burke.  UNITIZED REGENERATIVE FUEL CELL SYSTEM DEVELOPMENT , 2003 .

[20]  韩明 邵志刚衣宝廉.  Bifunctional electrodes with a thin catalyst layer for ‘unitized ’proton exchange membrane regenerative fuel cell , 1999 .

[21]  Fred Mitlitsky,et al.  Integrated Modular Propulsion and Regenerative Electro-energy Storage System (IMPRESS) for small satellites , 1996 .

[22]  Gavin Conibeer,et al.  A comparison of hydrogen storage technologies for solar-powered stand-alone power supplies: A photovoltaic system sizing approach , 2007 .

[23]  Fred Mitlitsky,et al.  Reversible (unitised) PEM fuel cell devices , 1999 .

[24]  Wenli Yao,et al.  Chemical deposition of platinum nanoparticles on iridium oxide for oxygen electrode of unitized regenerative fuel cell , 2007 .

[25]  Kodjo Agbossou,et al.  Analytical model for predicting the performance of photovoltaic array coupled with a wind turbine in a stand-alone renewable energy system based on hydrogen , 2003 .

[26]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[27]  Aliakbar Akbarzadeh,et al.  Performance analysis of a proton exchange membrane unitised regenerative fuel cell for solar hydrogen systems for remote area power supply , 2005 .

[28]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[29]  Anthony B. LaConti,et al.  Proton-exchange membrane regenerative fuel cells , 1994 .

[30]  Xiaoping Ma,et al.  Bifunctional oxygen electrode with corrosion-resistive gas diffusion layer for unitized regenerative fuel cell , 2006 .

[31]  F. Mitlitsky,et al.  Regenerative Fuel Cell Systems , 1998 .

[32]  Kodjo Agbossou,et al.  Electrolytic hydrogen based renewable energy system with oxygen recovery and re-utilization , 2004 .

[33]  Massimo Santarelli,et al.  Parameters estimation of a PEM fuel cell polarization curve and analysis of their behavior with temperature , 2006 .

[34]  J. Ivy,et al.  Summary of Electrolytic Hydrogen Production: Milestone Completion Report , 2004 .

[35]  K. Agbossou,et al.  Renewable energy systems based on hydrogen for remote applications , 2001 .

[36]  B. Yi,et al.  Composite Electrode for Unitized Regenerative Proton Exchange Membrane Fuel Cell with Improved Cycle Life , 2004 .

[37]  R. O’Hayre,et al.  Fuel Cell Fundamentals , 2005 .

[38]  W Smith,et al.  The role of fuel cells in energy storage , 2000 .

[39]  Chang-Soo Kim,et al.  Optimization of bifunctional electrocatalyst for PEM unitized regenerative fuel cell , 2004 .