Transmission of kilowatt-class CO(2) laser light through dielectric-coated metallic hollow waveguides for material processing.

We have measured the transmittance of 3-kW CO(2) laser light through Ge-coated Ag hollow waveguides. The basic characteristics such as transmissivity, bending loss, and output-beam properties are described. A maximum laser power of 2.6 kW was delivered through a straight hollow waveguide that was 1.7 mm in diameter and 2 m long. Furthermore, 4-m-long waveguides were fabricated by joining two waveguides. Finally, preliminary experiments on welding steel plates were done with the light transmitted through the waveguide. Although the focusing properties of the output beam should be improved for practical laser processing, this type of waveguide is promising for high-power CO(2) laser-light transmission.

[1]  Mitsunobu Miyagi,et al.  Excitation dependent losses and temperature increase in various hollow waveguides at 10.6 μm , 1987 .

[2]  Michel E. Marhic,et al.  Low‐order TE0q operation of a CO2 laser for transmission through circular metallic waveguides , 1981 .

[3]  N. Croitoru,et al.  Characterization of hollow fibers for the transmission of infrared radiation. , 1990, Applied optics.

[4]  Mitsunobu Miyagi,et al.  Loss reduction of dielectric-coated metallic hollow waveguides for CO2 laser light transmission , 1990 .

[5]  Mitsunobu Miyagi,et al.  Hollow IR waveguides , 1990, Photonics West - Lasers and Applications in Science and Engineering.

[6]  M. Miyagi,et al.  Design theory of dielectric-coated circular metallic waveguides for infrared transmission , 1984 .

[7]  M. Miyagi,et al.  Wave Propagation and Attenuation in the General Class of Circular Hollow Waveguides with Uniform Curvature , 1984 .

[8]  S. Sakuragi,et al.  Infrared image guide with bundled As-S glass fibers. , 1985, Applied optics.

[9]  Mitsunobu Miyagi,et al.  Transmission of 1 kW‐class CO2 laser light through circular hollow waveguides for material processing , 1991 .

[10]  E Garmire,et al.  Propagation of infrared light in flexible hollow waveguides. , 1976, Applied optics.

[11]  Mitsunobu Miyagi,et al.  Transmission characteristics of germanium thin-film-coated metallic hollow waveguides for high-powered CO/sub 2/ laser light , 1990 .

[12]  Mitsunobu Miyagi,et al.  Fabrication of germanium‐coated nickel hollow waveguides for infrared transmission , 1983 .

[13]  J. Harrington,et al.  Hollow sapphire fibers for the delivery of CO(2) laser energy. , 1990, Optics letters.

[14]  Mitsunobu Miyagi,et al.  Loss characteristics of circular hollow waveguides for incoherent infrared light , 1989 .

[15]  Hiromasa Ishiwatari,et al.  An optical cable for a CO 2 laser scalpel , 1986 .