Electrodeposition Technologies for Li‐Based Batteries: New Frontiers of Energy Storage
暂无分享,去创建一个
Zihan Shen | Jinyun Liu | Qingwen Zhou | Jun Pu | Jia Zhu | Jia Zhu | Jinyun Liu | Huigang Zhang | Zihan Shen | J. Pu | Qingwen Zhou | Chenglin Zhong | Huigang Zhang | Chenglin Zhong | Jia Zhu
[1] Scott J. Litzelman,et al. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries , 2022, Nature Energy.
[2] Jia Zhu,et al. Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits , 2019, Nature Communications.
[3] Qiuying Xia,et al. Low-temperature synthesized self-supported single-crystalline LiCoO2 nanoflake arrays as advanced 3D cathodes for flexible lithium-ion batteries , 2019, Journal of Materials Chemistry A.
[4] Yuegang Zhang,et al. Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries. , 2019, Chemistry.
[5] H. Oguchi,et al. A complex hydride lithium superionic conductor for high-energy-density all-solid-state lithium metal batteries , 2019, Nature Communications.
[6] Lianzhou Wang,et al. Characterisation of lithium-ion battery anodes fabricated via in-situ Cu6Sn5 growth on a copper current collector , 2019, Journal of Power Sources.
[7] Jaehak Lee,et al. Ultrafine Copper Nanopalm Tree‐Like Framework Decorated with Iron Oxide for Li‐Ion Battery Anodes with Exceptional Rate Capability and Cycling Stability , 2019, Advanced Energy Materials.
[8] Jinyun Liu,et al. High capacity 3D structured tin-based electroplated Li-ion battery anodes , 2019, Energy Storage Materials.
[9] Yayuan Liu,et al. Wrinkled Graphene Cages as Hosts for High-Capacity Li Metal Anodes Shown by Cryogenic Electron Microscopy. , 2019, Nano letters.
[10] Hui Zhan,et al. Flexible Artificial Solid Electrolyte Interphase Formed by 1,3-Dioxolane Oxidation and Polymerization for Metallic Lithium Anodes. , 2019, ACS applied materials & interfaces.
[11] Wei Lv,et al. Realizing stable lithium deposition by in situ grown Cu2S nanowires inside commercial Cu foam for lithium metal anodes , 2019, Journal of Materials Chemistry A.
[12] G. Wang,et al. A Nitrogen-Rich 2D sp2 -Carbon-Linked Conjugated Polymer Framework as a High-Performance Cathode for Lithium-Ion Batteries. , 2018, Angewandte Chemie.
[13] Chunya Wang,et al. Advanced Carbon for Flexible and Wearable Electronics , 2018, Advanced materials.
[14] Yan Yu,et al. Designed Nanoarchitectures by Electrostatic Spray Deposition for Energy Storage , 2018, Advanced materials.
[15] G. Meng,et al. Rational design of novel nanostructured arrays based on porous AAO templates for electrochemical energy storage and conversion , 2019, Nano Energy.
[16] D. R. Sørensen,et al. Structural Evolution of Disordered LixV2O5 Bronzes in V2O5 Cathodes for Li-Ion Batteries , 2018, Chemistry of Materials.
[17] Jinzhou Fu,et al. Ultrathin Si/CNTs Paper-Like Composite for Flexible Li-Ion Battery Anode With High Volumetric Capacity , 2018, Front. Chem..
[18] Heng Zhang,et al. Electrolyte Additives for Lithium Metal Anodes and Rechargeable Lithium Metal Batteries: Progress and Perspectives. , 2018, Angewandte Chemie.
[19] S. Yao,et al. Correlation between Li Plating Behavior and Surface Characteristics of Carbon Matrix toward Stable Li Metal Anodes , 2018, Advanced Energy Materials.
[20] Guoqiang Liu,et al. Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium , 2018, Nature Communications.
[21] Jingwei Xiang,et al. Improved Rechargeability of Lithium Metal Anode via Controlling Lithium‐Ion Flux , 2018, Advanced Energy Materials.
[22] Z. Lou,et al. Device Configurations and Future Prospects of Flexible/Stretchable Lithium‐Ion Batteries , 2018, Advanced Functional Materials.
[23] Jiayan Luo,et al. 2D Materials for Lithium/Sodium Metal Anodes , 2018, Advanced Energy Materials.
[24] D. Steingart,et al. Poor Man's Atomic Layer Deposition of LiF for Additive-Free Growth of Lithium Columns. , 2018, Nano letters.
[25] Yao Fu,et al. Enabling Stable Lithium Metal Anode via 3D Inorganic Skeleton with Superlithiophilic Interphase , 2018, Advanced Energy Materials.
[26] Minjoon Park,et al. Issues and Challenges Facing Flexible Lithium-Ion Batteries for Practical Application. , 2018, Small.
[27] Wei Liu,et al. Stretchable Lithium Metal Anode with Improved Mechanical and Electrochemical Cycling Stability , 2018, Joule.
[28] Lei Wen,et al. Engineering of lithium-metal anodes towards a safe and stable battery , 2018, Energy Storage Materials.
[29] Jiulin Wang,et al. Recent progress and perspective on lithium metal anode protection , 2018, Energy Storage Materials.
[30] J. Tu,et al. Confining Sulfur in Integrated Composite Scaffold with Highly Porous Carbon Fibers/Vanadium Nitride Arrays for High‐Performance Lithium–Sulfur Batteries , 2018 .
[31] Yunhui Huang,et al. Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive , 2018, Advanced materials.
[32] Yan Yu,et al. Advanced 3D Current Collectors for Lithium‐Based Batteries , 2018, Advanced materials.
[33] Jia Zhu,et al. Interlayer Lithium Plating in Au Nanoparticles Pillared Reduced Graphene Oxide for Lithium Metal Anodes , 2018, Advanced Functional Materials.
[34] H. Abruña,et al. Phenothiazine-Based Polymer Cathode Materials with Ultrahigh Power Densities for Lithium Ion Batteries , 2018, ACS Applied Energy Materials.
[35] Hui Xu,et al. Fabrication of Lithiophilic Copper Foam with Interfacial Modulation toward High-Rate Lithium Metal Anodes. , 2018, ACS applied materials & interfaces.
[36] Maxwell C. Schulze,et al. Electrodeposited thin-film CuxSb anodes for Li-ion batteries: enhancement of cycle life via tuning of film composition and engineering of the film-substrate interface , 2018 .
[37] Zaiping Guo,et al. Free-standing sulfur-polypyrrole cathode in conjunction with polypyrrole-coated separator for flexible Li-S batteries , 2018, Energy Storage Materials.
[38] Weigu Li,et al. Flexible All‐Solid‐State Supercapacitors of High Areal Capacitance Enabled by Porous Graphite Foams with Diverging Microtubes , 2018 .
[39] R. Bao,et al. Electrodeposition of high-density lithium vanadate nanowires for lithium-ion battery , 2018, Applied Surface Science.
[40] L. Mai,et al. α-MoO3- by plasma etching with improved capacity and stabilized structure for lithium storage , 2018, Nano Energy.
[41] Liangting Cai,et al. Nickel sulfide anchored carbon nanotubes for all-solid-state lithium batteries with enhanced rate capability and cycling stability , 2018 .
[42] Jun Lu,et al. 30 Years of Lithium‐Ion Batteries , 2018, Advanced materials.
[43] Hong Liang,et al. 3D Current Collectors for Lithium-Ion Batteries: A Topical Review , 2018, Small Methods.
[44] C. Delmas,et al. Sodium and Sodium‐Ion Batteries: 50 Years of Research , 2018 .
[45] Xin-bo Zhang,et al. Functional and stability orientation synthesis of materials and structures in aprotic Li-O2 batteries. , 2018, Chemical Society reviews.
[46] Rui Zhang,et al. Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries , 2018 .
[47] Fernando A. Soto,et al. Synergistic Effect of Graphene Oxide for Impeding the Dendritic Plating of Li , 2018 .
[48] Hui Xu,et al. Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress , 2018, Advanced materials.
[49] E. Uchaker,et al. Revitalized interest in vanadium pentoxide as cathode material for lithium-ion batteries and beyond , 2018 .
[50] S. Limpijumnong,et al. Effect of Sn-Doping on Behavior of Li-Intercalation in V2O5 Cathode Materials of Li-Ion Batteries: A Computational Perspective , 2018 .
[51] M. R. Sovizi,et al. Enhancement in electrochemical performances of Li–S batteries by electrodeposition of sulfur on polyaniline–dodecyl benzene sulfonic acid–sulfuric acid (PANI–DBSA–H2SO4) honeycomb structure film , 2018 .
[52] Kyeongjae Cho,et al. 2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries , 2018, Nature Nanotechnology.
[53] Yan-li Chen,et al. Electrodeposited binder-free NiCo2O4@carbon nanofiber as a high performance anode for lithium ion batteries , 2018, Nanotechnology.
[54] S. Guan,et al. One-Step Electrodeposition of Layer by Layer Architectural Si-Graphene Nanocomposite Anode of Lithium Ion Battery with Enhanced Cycle Performance , 2018 .
[55] Zhaohui Li,et al. Coaxial MnO2 Nanoshell/CNFs Composite Film Anode for High-Performance Lithium-Ion Batteries , 2018 .
[56] S. Passerini,et al. 3D Porous Cu–Zn Alloys as Alternative Anode Materials for Li‐Ion Batteries with Superior Low T Performance , 2018 .
[57] Yan Yu,et al. The nanoscale circuitry of battery electrodes , 2017, Science.
[58] Liangting Cai,et al. Fe3S4@Li7P3S11 nanocomposites as cathode materials for all-solid-state lithium batteries with improved energy density and low cost , 2017 .
[59] Allen Pei,et al. Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode , 2017, Science Advances.
[60] Quan-hong Yang,et al. Carbon enables the practical use of lithium metal in a battery , 2017 .
[61] Yonggang Yao,et al. Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode , 2017, Advanced materials.
[62] Yanwu Zhu,et al. High Areal Capacity and Lithium Utilization in Anodes Made of Covalently Connected Graphite Microtubes , 2017, Advanced materials.
[63] Kristin A. Persson,et al. Non-encapsulation approach for high-performance Li–S batteries through controlled nucleation and growth , 2017, Nature Energy.
[64] M. Javanbakht,et al. Synthesis of mesoporous LixMnO2 as a cathode material of Lithium ion battery via one-pot galvanostatic electrodeposition method , 2017 .
[65] D. Xie,et al. Smart construction of polyaniline shell on cobalt oxides as integrated core-shell arrays for enhanced lithium ion batteries , 2017 .
[66] M. Morcrette,et al. Electrochemical synthesis of 1D core-shell Si/TiO 2 nanotubes for lithium ion batteries , 2017 .
[67] Huigang Zhang,et al. Novel Co2 VO4 Anodes Using Ultralight 3D Metallic Current Collector and Carbon Sandwiched Structures for High-Performance Li-Ion Batteries. , 2017, Small.
[69] P. Mukherjee,et al. Hierarchical Structured Cu/Ni/TiO2 Nanocomposites as Electrodes for Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.
[70] Tianyu Liu,et al. 3D printed functional nanomaterials for electrochemical energy storage , 2017 .
[71] Q. Jiang,et al. Lithium Ion Breathable Electrodes with 3D Hierarchical Architecture for Ultrastable and High‐Capacity Lithium Storage , 2017 .
[72] Rui Zhang,et al. Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. , 2017, Chemical reviews.
[73] Huigang Zhang,et al. Porous-Nickel-Scaffolded Tin-Antimony Anodes with Enhanced Electrochemical Properties for Li/Na-Ion Batteries. , 2017, ACS applied materials & interfaces.
[74] D. Vernardou,et al. Electrodeposition of Vanadium Oxides at Room Temperature as Cathodes in Lithium-Ion Batteries , 2017 .
[75] P. He,et al. Carbon-Free O2 Cathode with Three-Dimensional Ultralight Nickel Foam-Supported Ruthenium Electrocatalysts for Li-O2 Batteries. , 2017, ChemSusChem.
[76] X. Tao,et al. 3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries , 2017 .
[77] F. Pan,et al. Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance , 2017 .
[78] Yu Zhang,et al. High‐Performance Integrated Self‐Package Flexible Li–O2 Battery Based on Stable Composite Anode and Flexible Gas Diffusion Layer , 2017, Advanced materials.
[79] Rui Zhang,et al. Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes. , 2017, Angewandte Chemie.
[80] P. Knauth,et al. Electrochemically engineered single Li-ion conducting solid polymer electrolyte on titania nanotubes for microbatteries , 2017 .
[81] Huigang Zhang,et al. Ultra-flexible lithium ion batteries fabricated by electrodeposition and solvothermal synthesis , 2017 .
[82] Changle Li,et al. T-Nb2O5 quantum dots prepared by electrodeposition for fast Li ion intercalation/deintercalation , 2017, Nanotechnology.
[83] Sheng Xu,et al. Electroplating lithium transition metal oxides , 2017, Science Advances.
[84] Prashanth H. Jampani,et al. Pulsed Current Electrodeposition of Silicon Thin Films Anodes for Lithium Ion Battery Applications , 2017 .
[85] T. Zhao,et al. A stabilized high-energy Li-polyiodide semi-liquid battery with a dually-protected Li anode , 2017 .
[86] L. Wang,et al. Amorphous nanosized silicon with hierarchically porous structure for high-performance lithium ion batteries , 2017 .
[87] X. Tao,et al. High-content of sulfur uniformly embedded in mesoporous carbon: a new electrodeposition synthesis and an outstanding lithium–sulfur battery cathode , 2017 .
[88] C. Lee,et al. Agar templated electrodeposition of binary zinc-cobalt alloy and formation of zinc-cobalt-carbon nanocomposite for application in secondary lithium batteries , 2017 .
[89] Henghui Zhou,et al. SnO2@PANI Core-Shell Nanorod Arrays on 3D Graphite Foam: A High-Performance Integrated Electrode for Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.
[90] Y. Ein‐Eli,et al. Distinct Copper Electrodeposited Carbon Nanotubes (CNT) Tissues as Anode Current Collectors in Li-ion Battery , 2017 .
[91] Yayuan Liu,et al. Sulfiphilic Nickel Phosphosulfide Enabled Li2S Impregnation in 3D Graphene Cages for Li–S Batteries , 2017, Advanced materials.
[92] Yi Cui,et al. Reviving the lithium metal anode for high-energy batteries. , 2017, Nature nanotechnology.
[93] Liaoyong Wen,et al. Multiple nanostructures based on anodized aluminium oxide templates. , 2017, Nature nanotechnology.
[94] T. Yokoshima,et al. A pre-lithiation method for sulfur cathode used for future lithium metal free full battery , 2017 .
[95] Xin-Bing Cheng,et al. Advanced Micro/Nanostructures for Lithium Metal Anodes , 2017, Advanced science.
[96] Xin-Bing Cheng,et al. Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries , 2017 .
[97] S. Maria,et al. Electrodeposition of polymer electrolyte in nanostructured electrodes for enhanced electrochemical performance of thin-film Li-ion microbatteries , 2017 .
[98] Kun Fu,et al. Conformal, Nanoscale ZnO Surface Modification of Garnet-Based Solid-State Electrolyte for Lithium Metal Anodes. , 2017, Nano letters.
[99] David Rooney,et al. 3D nitrogen-doped graphene foam with encapsulated germanium/nitrogen-doped graphene yolk-shell nanoarchitecture for high-performance flexible Li-ion battery , 2017, Nature Communications.
[100] Peter Müller-Buschbaum,et al. Silicon based lithium-ion battery anodes: A chronicle perspective review , 2017 .
[101] F. Endres,et al. Review—Electrodeposition of Nanostructured Materials from Aqueous, Organic and Ionic Liquid Electrolytes for Li-Ion and Na-Ion Batteries: A Comparative Review , 2017 .
[102] Jiaqi Huang,et al. Calendering of free-standing electrode for lithium-sulfur batteries with high volumetric energy density , 2017 .
[103] T. Yokoshima,et al. Electrophoretically deposited carbon nanotube anchor layer to improve areal capacity of Si-O-C composite anode for lithium secondary batteries , 2016 .
[104] J. Tu,et al. Nitrogen-doped carbon shell on metal oxides core arrays as enhanced anode for lithium ion batteries , 2016 .
[105] S. Javadian,et al. Pulsed current electrodeposition parameters to control the Sn particle size to enhance electrochemical performance as anode material in lithium ion batteries , 2016 .
[106] Z. Ji,et al. Synthesis of porous nickel networks supported metal oxide nanowire arrays as binder-free anode for lithium-ion batteries , 2016 .
[107] Xinhua Xu,et al. Solid polymer electrolyte coating three-dimensional Sn/Ni bimetallic nanotube arrays for high performance lithium-ion battery anodes , 2016 .
[108] Huigang Zhang,et al. Structure design of NiCo2O4 electrodes for high performance pseudocapacitors and lithium-ion batteries , 2016 .
[109] F. L. Cras,et al. Fast deposition of conformal LiCoO2 thin film electrodes for high capacity 3D batteries , 2016 .
[110] S. Dou,et al. Silicon/Mesoporous Carbon/Crystalline TiO2 Nanoparticles for Highly Stable Lithium Storage. , 2016, ACS nano.
[111] Peng Long,et al. High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life. , 2016, Nano letters.
[112] Tao Chen,et al. Wearable fiber-shaped energy conversion and storage devices based on aligned carbon nanotubes , 2016 .
[113] E. D. Jackson,et al. Evaluation of the Electrochemical Properties of Crystalline Copper Antimonide Thin Film Anodes for Lithium Ion Batteries Produced by Single Step Electrodeposition , 2016 .
[114] H. Byon,et al. High Energy Efficiency and Stability for Photoassisted Aqueous Lithium–Iodine Redox Batteries , 2016 .
[115] K. Ng,et al. Enhanced Lithium–Oxygen Battery Performances with Pt Subnanocluster Decorated N-Doped Single-Walled Carbon Nanotube Cathodes , 2016 .
[116] Huigang Zhang,et al. Electrochemical Fabrication of Monolithic Electrodes with Core/Shell Sandwiched Transition Metal Oxide/Oxyhydroxide for High-Performance Energy Storage. , 2016, ACS applied materials & interfaces.
[117] Hong‐Jie Peng,et al. 3D Carbonaceous Current Collectors: The Origin of Enhanced Cycling Stability for High‐Sulfur‐Loading Lithium–Sulfur Batteries , 2016 .
[118] Shuangyin Wang,et al. The enhancement of polysulfide absorbsion in LiS batteries by hierarchically porous CoS2/carbon paper interlayer , 2016 .
[119] Matthew D. Goodman,et al. Graphene Sandwiched Mesostructured Li‐Ion Battery Electrodes , 2016, Advanced materials.
[120] J. Janek,et al. Facile synthesis of micrometer-long antimony nanowires by template-free electrodeposition for next generation Li-ion batteries , 2016 .
[121] Heon-Cheol Shin,et al. Electrochemical Synthesis of Iron Phosphides as Anode Materials for Lithium Secondary Batteries , 2016 .
[122] Heng‐guo Wang,et al. Template-free electrodeposition of AlFe alloy nanowires from a room-temperature ionic liquid as an anode material for Li-ion batteries. , 2016, Faraday discussions.
[123] Yayuan Liu,et al. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. , 2016, Nature nanotechnology.
[124] Yang-Kook Sun,et al. Silver nanowires as catalytic cathodes for stabilizing lithium-oxygen batteries , 2016 .
[125] Joon Kyo Seo,et al. Self-standing porous LiMn2O4 nanowall arrays as promising cathodes for advanced 3D microbatteries and flexible lithium-ion batteries , 2016 .
[126] Jinghua Yin,et al. Construction of cobalt sulfide/nickel core-branch arrays and their application as advanced electrodes for electrochemical energy storage , 2016 .
[127] P. Liu,et al. Three-dimensional Fe3O4 Nanotube Array on Carbon Cloth Prepared from A Facile Route for Lithium ion Batteries , 2016 .
[128] T. Zhao,et al. MnO 2-x nanosheets on stainless steel felt as a carbon- and binder-free cathode for non-aqueous lithium-oxygen batteries , 2016 .
[129] Hyun-Wook Lee,et al. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth , 2016, Nature Energy.
[130] A. Mohraz,et al. Microstructural tunability of co-continuous bijel-derived electrodes to provide high energy and power densities , 2016 .
[131] Ralph G Nuzzo,et al. 3D Scaffolded Nickel–Tin Li‐Ion Anodes with Enhanced Cyclability , 2015, Advanced materials.
[132] Suojiang Zhang,et al. Ternary nanoarray electrode with corn-inspired hierarchical design for synergistic lithium storage , 2016, Nano Research.
[133] Jinyun Liu,et al. Three-dimensionally scaffolded Co3O4 nanosheet anodes with high rate performance , 2015 .
[134] Guangyu Zhao,et al. Cuprous oxide as Cathode Catalysts of Lithium Oxygen Batteries , 2015 .
[135] Imanol Landa-Medrano,et al. Carbon-Free Cathodes: A Step Forward in the Development of Stable Lithium-Oxygen Batteries. , 2015, ChemSusChem.
[136] C. O’Dwyer,et al. Electrodeposited Structurally Stable V2O5 Inverse Opal Networks as High Performance Thin Film Lithium Batteries. , 2015, ACS applied materials & interfaces.
[137] Jun Chen,et al. Nanocomposite of Fe2 O3 @C@MnO2 as an Efficient Cathode Catalyst for Rechargeable Lithium-Oxygen Batteries. , 2015, Small.
[138] Xiang Ding,et al. Improved electrochemical performances of CuO nanotube array prepared via electrodeposition as anode for lithium ion battery , 2015 .
[139] Tetsuo Sakai,et al. Development of lithium ion battery using fiber-type lithium-rich cathode and carbon anode materials , 2015 .
[140] Jinghua Yin,et al. Free-standing three-dimensional continuous multilayer V2O5 hollow sphere arrays as high-performance cathode for lithium batteries , 2015 .
[141] X. Tao,et al. Sulfur synchronously electrodeposited onto exfoliated graphene sheets as a cathode material for advanced lithium–sulfur batteries , 2015 .
[142] Limin Leng,et al. Pd nanoparticles decorating flower-like Co3O4 nanowire clusters to form an efficient, carbon/binder-free cathode for Li–O2 batteries , 2015 .
[143] Stefania Ferrari,et al. Latest advances in the manufacturing of 3D rechargeable lithium microbatteries , 2015 .
[144] A. Bund,et al. Electrochemical lithiation of thin silicon based layers potentiostatically deposited from ionic liquid , 2015 .
[145] G. Cui,et al. A Carbon‐ and Binder‐Free Nanostructured Cathode for High‐Performance Nonaqueous Li‐O2 Battery , 2015, Advanced science.
[146] Guangyuan Zheng,et al. The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth , 2015, Nature Communications.
[147] Huaping Zhao,et al. Highly Ordered Three-Dimensional Ni-TiO2 Nanoarrays as Sodium Ion Battery Anodes , 2015 .
[148] T. Hang,et al. High-performance Si-based 3D Cu nanostructured electrode assembly for rechargeable lithium batteries , 2015 .
[149] John A Rogers,et al. Holographic patterning of high-performance on-chip 3D lithium-ion microbatteries , 2015, Proceedings of the National Academy of Sciences.
[150] Kaixue Wang,et al. Co₃O₄-based binder-free cathodes for lithium-oxygen batteries with improved cycling stability. , 2015, Dalton transactions.
[151] P. Braun,et al. Three-dimensionally mesostructured Fe2O3 electrodes with good rate performance and reduced voltage hysteresis , 2015 .
[152] F. L. Cras,et al. Direct fabrication of LiCoO2 thin-films in water–ethanol solutions by electrochemical–hydrothermal method , 2015 .
[153] L. Mai,et al. Integrated SnO2 nanorod array with polypyrrole coverage for high-rate and long-life lithium batteries. , 2015, Physical chemistry chemical physics : PCCP.
[154] Soo-Jin Park,et al. Optimization of Carbon‐ and Binder‐Free Au Nanoparticle‐Coated Ni Nanowire Electrodes for Lithium‐Oxygen Batteries , 2015 .
[155] F. Endres,et al. Preparation of Ge nanotube arrays from an ionic liquid for lithium ion battery anodes with improved cycling stability. , 2015, Chemical communications.
[156] Shaomin Li,et al. Coating of α-MoO3 on nitrogen-doped carbon nanotubes by electrodeposition as a high-performance cathode material for lithium-ion batteries , 2015 .
[157] Jun Chen,et al. Sulfur nanodots electrodeposited on ni foam as high-performance cathode for Li-S batteries. , 2015, Nano letters.
[158] Colm O'Dwyer,et al. 3D vanadium oxide inverse opal growth by electrodeposition , 2015 .
[159] Yiming Zhu,et al. Properties and electrochemical behaviors of AuPt alloys prepared by direct-current electrodeposition for lithium air batteries , 2015 .
[160] T. Yokoshima,et al. Electrodeposited three-dimensional porous Si–O–C/Ni thick film as high performance anode for lithium-ion batteries , 2014 .
[161] Xinhua Xu,et al. One-step electrochemical growth of a three-dimensional Sn-Ni@PEO nanotube array as a high performance lithium-ion battery anode. , 2014, ACS applied materials & interfaces.
[162] Ji‐Guang Zhang,et al. Dendrimer‐Encapsulated Ruthenium Oxide Nanoparticles as Catalysts in Lithium‐Oxygen Batteries , 2014 .
[163] R. Nuzzo,et al. Batteries: Knowing when small is better. , 2014, Nature nanotechnology.
[164] S. Xie,et al. A strategy to overcome the limits of carbon-based materials as lithium-ion battery anodes , 2014 .
[165] Xingjiu Huang,et al. Hydrothermal Fabrication of Three‐Dimensional Secondary Battery Anodes , 2014, Advanced materials.
[166] Chaojiang Niu,et al. Heterogeneous branched core–shell SnO2–PANI nanorod arrays with mechanical integrity and three dimentional electron transport for lithium batteries , 2014 .
[167] Bing Sun,et al. Electrodeposition of thin poly(propylene glycol) acrylate electrolytes on 3D-nanopillar electrodes , 2014 .
[168] B. Liu,et al. Flexible Energy‐Storage Devices: Design Consideration and Recent Progress , 2014, Advanced materials.
[169] Yuhai Hu,et al. Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies , 2014 .
[170] Soojin Park,et al. Flexible high-energy Li-ion batteries with fast-charging capability. , 2014, Nano letters.
[171] Yi Cui,et al. Improving lithium–sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface , 2014, Nature Communications.
[172] N. Lewis,et al. Photoelectrochemical behavior of hierarchically structured Si/WO3 core-shell tandem photoanodes. , 2014, Nano letters.
[173] Haihui Wang,et al. Ultrathin and highly-ordered CoO nanosheet arrays for lithium-ion batteries with high cycle stability and rate capability , 2014 .
[174] Guangmin Zhou,et al. Progress in flexible lithium batteries and future prospects , 2014 .
[175] Xiaofei Hu,et al. ε-MnO2 nanostructures directly grown on Ni foam: a cathode catalyst for rechargeable Li-O2 batteries. , 2014, Nanoscale.
[176] K. Nishimura,et al. X-ray Diffraction Characterization and Battery Performances of Fiber-type Li-Mn-O Electrode for Li-ion Battery , 2014 .
[177] Dong Wook Kim,et al. Electrodeposited 3D porous silicon/copper films with excellent stability and high rate performance for lithium-ion batteries , 2014 .
[178] T. Yokoshima,et al. New Si–O–C composite film anode materials for LIB by electrodeposition , 2014 .
[179] Changwei Su,et al. Electrodeposition of Nis3S2/Ni Composites as High-Performance Cathodes for Lithium Batteries , 2014 .
[180] N. Sonoyama,et al. Preparation of nanocrystalline LiMn2O4 thin film by electrodeposition method and its electrochemical performance for lithium battery , 2013 .
[181] Y. Li,et al. 3D ordered macroporous germanium fabricated by electrodeposition from an ionic liquid and its lithium storage properties , 2013 .
[182] T. Yokoshima,et al. Structural analysis of highly-durable SiOC composite anode prepared by electrodeposition for lithium secondary batteries , 2013 .
[183] Liangbing Hu,et al. Electrodeposited three-dimensional Ni-Si nanocable arrays as high performance anodes for lithium ion batteries. , 2013, Nanoscale.
[184] Ling Huang,et al. Nanoscale tin-based intermetallic electrodes encapsulated in microporous copper substrate as the negative electrode with a high rate capacity and a long cycleability for lithium-ion batteries , 2013 .
[185] Heon-Cheol Shin,et al. Amorphous FePy (0.1 < y < 0.7) thin film anode for rechargeable lithium battery , 2013 .
[186] C. Lee,et al. Brush electroplated CoSn2 alloy film for application in lithium-ion batteries , 2013 .
[187] J. Tarascon,et al. Exploring sulfur solubility in ionic liquids for the electrodeposition of sulfide films with their electrochemical reactivity toward lithium , 2013 .
[188] O. Stadnik,et al. Thin film nonstoichiometric chromium oxide-based cathode material for rechargeable and primary lithium batteries , 2013, Journal of Solid State Electrochemistry.
[189] Paul V Braun,et al. High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes , 2013, Nature Communications.
[190] S. Mitra,et al. Thin copper phosphide films as conversion anode for lithium-ion battery applications , 2013 .
[191] Chen Chen,et al. Twisting Carbon Nanotube Fibers for Both Wire‐Shaped Micro‐Supercapacitor and Micro‐Battery , 2013, Advanced materials.
[192] Jeng-Yu Lin,et al. Cathodic Deposition of Flaky Nickel Sulfide Nanostructure as an Electroactive Material for High-Performance Supercapacitors , 2013 .
[193] S. Yen,et al. Electrochemical Synthesis of Lithium Dicobalt Tetraoxide for Thin Film Lithium-Ion Batteries , 2013 .
[194] Heon-Cheol Shin,et al. Cable‐Type Flexible Lithium Ion Battery Based on Hollow Multi‐Helix Electrodes , 2012, Advanced materials.
[195] Zhen He,et al. Electrodeposition of Crystalline Co3O4—A Catalyst for the Oxygen Evolution Reaction , 2012 .
[196] J. Tu,et al. Three-dimensional porous nano-Ni supported silicon composite film for high-performance lithium-ion batteries , 2012 .
[197] Ayyakkannu Manivannan,et al. Electrodeposition of amorphous silicon anode for lithium ion batteries , 2012 .
[198] B. Zhang,et al. Three-dimensional nanoarchitecture of Sn–Sb–Co alloy as an anode of lithium-ion batteries with excellent lithium storage performance , 2012 .
[199] R. Inguanta,et al. High-performing Sn–Co nanowire electrodes as anodes for lithium-ion batteries , 2012 .
[200] F. Dumur,et al. Highly conformal electrodeposition of copolymer electrolytes into titania nanotubes for 3D Li-ion batteries , 2012, Nanoscale Research Letters.
[201] Ke-ning Sun,et al. Electrodeposited Si film with excellent stability and high rate performance for lithium-ion battery anodes , 2012 .
[202] Paul V Braun,et al. Three-dimensional metal scaffold supported bicontinuous silicon battery anodes. , 2012, Nano letters.
[203] G. Jerkiewicz,et al. Surface science and electrochemical analysis of nickel foams. , 2012, ACS applied materials & interfaces.
[204] T. Yokoshima,et al. Highly durable SiOC composite anode prepared by electrodeposition for lithium secondary batteries , 2012 .
[205] J. Tarascon,et al. Growth of single-crystal copper sulfide thin films viaelectrodeposition in ionic liquid media for lithium ion batteries , 2012 .
[206] P. Ajayan,et al. 3D nanoporous nanowire current collectors for thin film microbatteries. , 2012, Nano letters.
[207] G. Wallace,et al. Electrochemically Synthesized Polypyrrole/Graphene Composite Film for Lithium Batteries , 2012 .
[208] Yung-Cheng Lee,et al. Three-dimensional Ni/TiO2 nanowire network for high areal capacity lithium ion microbattery applications. , 2012, Nano letters.
[209] Jean-Marie Tarascon,et al. Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.
[210] B. Dunn,et al. Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.
[211] Z. Du,et al. Enhanced Electrochemical Performance of Sn–Co Nanoarchitectured Electrode for Lithium Ion Batteries , 2011 .
[212] Y. Bando,et al. Coaxial Cu-Si@C array electrodes for high-performance lithium ion batteries. , 2011, Chemical communications.
[213] J. Pereira‐Ramos,et al. One step synthesis of lamellar R-3m LiCoO2 thin films by an electrochemical-hydrothermal method , 2011 .
[214] Mohammad M. Shahjamali,et al. Template free electrochemical deposition of ZnSb nanotubes for Li ion battery anodes. , 2011, Chemical communications.
[215] P. Ajayan,et al. Building energy storage device on a single nanowire. , 2011, Nano letters.
[216] Li Li,et al. Preparation of LiCoO2 films from spent lithium-ion batteries by a combined recycling process , 2011 .
[217] D. He,et al. NiO nanocone array electrode with high capacity and rate capability for Li-ion batteries , 2011 .
[218] P. Ajayan,et al. Flexible carbon nanotube--Cu2O hybrid electrodes for li-ion batteries. , 2011, Small.
[219] Paul V. Braun,et al. Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. , 2011, Nature nanotechnology.
[220] E. Asselin,et al. Electrodeposition and Growth Mechanism of Copper Sulfide Nanowires , 2011 .
[221] N. Kumagai,et al. Preparation of Co–Sn alloy film as negative electrode for lithium secondary batteries by pulse electrodeposition method , 2011 .
[222] K. Edström,et al. Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors , 2011 .
[223] Jun Liu,et al. V2O5 Nano‐Electrodes with High Power and Energy Densities for Thin Film Li‐Ion Batteries , 2011 .
[224] Dunmin Lin,et al. Room-temperature synthesis of crystallized LiCoO2 thin films by electrochemical technique , 2011 .
[225] Chunsheng Wang,et al. A Patterned 3D Silicon Anode Fabricated by Electrodeposition on a Virus‐Structured Current Collector , 2011 .
[226] T. Gustafsson,et al. Electrodeposition as a Tool for 3D Microbattery Fabrication , 2011 .
[227] W. Cho,et al. Electrochemical preparation and characterization of V2O5/polyaniline composite film cathodes for Li battery , 2010 .
[228] P. Taberna,et al. MnO2-coated Ni nanorods: Enhanced High Rate Behavior in Pseudo-Capacitive Supercapacitor , 2010 .
[229] Dawei Liu,et al. Engineering nanostructured electrodes and fabrication of film electrodes for efficient lithium ion intercalation , 2010 .
[230] Reza Ghodssi,et al. Virus-enabled silicon anode for lithium-ion batteries. , 2010, ACS nano.
[231] Jae-Hun Kim,et al. Li-alloy based anode materials for Li secondary batteries. , 2010, Chemical Society reviews.
[232] Xueliang Li,et al. Controllable solvo-hydrothermal electrodeposition of lithium vanadate uniform carnation-like nanostructure and their electrochemical performance , 2010 .
[233] J. Tarascon,et al. Al Current Collectors for Li-Ion Batteries Made via a Template-Free Electrodeposition Process in Ionic Liquids , 2010 .
[234] J. Tu,et al. Hierarchical porous cobalt oxide array films prepared by electrodeposition through polystyrene sphere template and their applications for lithium ion batteries , 2010 .
[235] Jaephil Cho,et al. A critical size of silicon nano-anodes for lithium rechargeable batteries. , 2010, Angewandte Chemie.
[236] T. Gustafsson,et al. Self-supported three-dimensional nanoelectrodes for microbattery applications. , 2009, Nano letters.
[237] G. Zangari,et al. Dendritic Growth and Morphology Selection in Copper Electrodeposition from Acidic Sulfate Solutions Containing Chlorides , 2009 .
[238] Pierre-Louis Taberna,et al. High rate capability pure Sn-based nano-architectured electrode assembly for rechargeable lithium batteries , 2009 .
[239] Ling Huang,et al. One-step electrodeposition synthesis and electrochemical properties of Cu6Sn5 alloy anodes for lithium-ion batteries , 2009 .
[240] Jaephil Cho,et al. Three-dimensional porous silicon particles for use in high-performance lithium secondary batteries. , 2008, Angewandte Chemie.
[241] T. Gustafsson,et al. Direct electrodeposition of aluminium nano-rods , 2008 .
[242] M. Itagaki,et al. Development of non-flammable lithium secondary battery with room-temperature ionic liquid electrolyte: Performance of electroplated Al film negative electrode , 2008 .
[243] Chunlei Wang,et al. Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery , 2008 .
[244] J. Tarascon,et al. Electrochemical method for direct deposition of nanometric bismuth and its electrochemical properties vs Li , 2008 .
[245] Hiroyuki Nishide,et al. Toward Flexible Batteries , 2008, Science.
[246] Zhen-hua Chen,et al. Synthesis mechanisms of lithium cobalt oxide prepared by hydrothermal–electrochemical method , 2007 .
[247] I. Uchida,et al. Structure and electron density analysis of electrochemically and chemically delithiated LiCoO2 single crystals , 2007 .
[248] Yunhui Huang,et al. Improving Lithium Batteries by Tethering Carbon-Coated LiFePO4 to Polypyrrole , 2006 .
[249] Menachem Nathan,et al. Progress in three-dimensional (3D) Li-ion microbatteries , 2006 .
[250] Zhen-hua Chen,et al. Studies on the morphologies of LiCoO2 films prepared by soft solution processing , 2006 .
[251] J. Tarascon,et al. High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications , 2006, Nature materials.
[252] U. Landau,et al. Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents A Theoretical Analysis , 2006 .
[253] M. Nathan,et al. Three-dimensional thin-film Li-ion microbatteries for autonomous MEMS , 2005, Journal of Microelectromechanical Systems.
[254] G. Wallace,et al. A highly flexible polymer fibre battery , 2005 .
[255] T. Osaka,et al. Changes of electro-deposited Sn–Ni alloy thin film for lithium ion battery anodes during charge discharge cycling , 2005 .
[256] S. Tobishima,et al. Anode behavior of electroplated rough surface Sn thin films for lithium-ion batteries , 2005 .
[257] Heon-Cheol Shin,et al. Three‐Dimensional Porous Copper–Tin Alloy Electrodes for Rechargeable Lithium Batteries , 2005 .
[258] V. Paserin,et al. CVD Technique for Inco Nickel Foam Production , 2004 .
[259] T. Yokoshima,et al. Electrodeposited Sn-Ni alloy film as a high capacity anode material for lithium-ion secondary batteries , 2003 .
[260] Christopher S. Johnson,et al. Structural considerations of intermetallic electrodes for lithium batteries , 2003 .
[261] J. Besenhard,et al. Anodic materials for rechargeable Li-batteries , 2002 .
[262] J. Tarascon,et al. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries , 2000, Nature.
[263] J. Dahn,et al. In Situ X‐Ray Study of the Electrochemical Reaction of Li with η ′ ‐ Cu6Sn5 , 2000 .
[264] D. Guyomard,et al. Electrochemically synthesized vanadium oxides as lithium insertion hosts , 1999 .