Repair of Reinforced Concrete Bridge Columns via Plastic Hinge Relocation Project: Volume 1: Repair Using Conventional Materials

[1]  James K. Wight,et al.  Study of Moving Beam Plastic Hinging Zones for Earthquake-Resistant Design of Reinforced Concrete Buildings , 1987 .

[2]  Ian G. Buckle,et al.  Seismic Retrofitting Manual for Highway Structures: Part 1 - Bridges , 2006 .

[3]  Sarah L. Billington,et al.  Modeling Residual Displacements of Concrete Bridge Columns under Earthquake Loads Using Fiber Elements , 2010 .

[4]  Edward Cohen,et al.  Minimum Design Loads for Buildings and Other Structures , 1990 .

[5]  M S Saiidi,et al.  Seismic Damage States and Response Parameters for Bridge Columns , 2010, SP-271: Structural Concrete in Performance-Based Seismic Design of Bridges.

[6]  Yang Yang,et al.  Seismic Repair of Reinforced Concrete Bridge Columns: Review of Research Findings , 2015 .

[7]  P. Gergely,et al.  Behavior and Design of Noncontact Lap Splices Subjected to Repeated Inelastic tensile loading , 1991 .

[8]  Mervyn J. Kowalsky,et al.  Repair of Reinforced Concrete Bridge Columns Containing Buckled and Fractured Reinforcement by Plastic Hinge Relocation , 2014 .

[9]  Michael E. Kreger,et al.  Development of a Precast Bent Cap System , 2001 .

[10]  Mervyn J. Kowalsky,et al.  Grouted shear stud connection for steel bridge substructures , 2015 .

[11]  Barbara Pfeffer,et al.  Seismic Design Of Reinforced Concrete And Masonry Buildings , 2016 .

[12]  J. Ingham,et al.  Rehabilitation of earthquake damaged external RC beam‐column joints by joint enlargement using prestressed steel angles , 2014 .

[13]  B. Stojadinović,et al.  RESIDUAL DISPLACEMENT AND POST EARTHQUAKE CAPACITY OF HIGHWAY BRIDGES , 2002 .

[14]  Mervyn J. Kowalsky,et al.  Displacement-based seismic design of structures , 2007 .

[15]  Jack P. Moehle,et al.  A framework methodology for performance-based earthquake engineering , 2004 .

[16]  James K. Wight,et al.  Relocating Beam Plastic Hinging Zones for Earthquake Resistant Design of Reinforced Concrete Buildings , 1988 .

[17]  J. Mander,et al.  Theoretical stress strain model for confined concrete , 1988 .

[18]  Jack W. Baker,et al.  Efficient Analytical Fragility Function Fitting Using Dynamic Structural Analysis , 2015 .

[19]  K. Kawashima,et al.  Seismic design and retrofit of bridges , 2000 .

[20]  Sarah L. Billington,et al.  Performance‐based earthquake engineering assessment of a self‐centering, post‐tensioned concrete bridge system , 2011 .

[21]  Rejane Martins Fernandes Canha,et al.  Analysing the base of precast column in socket foundations with smooth interfaces , 2009 .

[22]  Gregory A. MacRae,et al.  Residual Displacement Response Spectrum , 1998 .

[23]  Jason C. Goodnight,et al.  The Effects of Load History and Design Variables on Performance Limit States of Circular Bridge Columns , 2014 .

[24]  Rejane Martins Fernandes Canha,et al.  Analysis of the behavior of transverse walls of socket base connections , 2009 .

[25]  M. Saiid Saiidi,et al.  Design Guidelines for Rapid Repair of Earthquake-Damaged Circular RC Bridge Columns Using CFRP , 2013 .

[26]  James E McDonald,et al.  Evaluation and Repair of Concrete Structures: Annotated Bibliography 1978 - 1988. Volume 1. (Repair, Evaluation, Maintenance and Rehabilitation Research Program) , 1991 .

[27]  F. J. Vecchio,et al.  Analysis of Repaired Reinforced Concrete Structures , 1999 .

[28]  Frieder Seible,et al.  STRATEGIC RELOCATION OF PLASTIC HINGES IN BRIDGE COLUMNS , 1997 .

[29]  Helmut Krawinkler,et al.  Guidelines for the Seismic Rehabilitation of Buildings: New Analysis Procedures Developed Specifically for Application with Existing Buildings , 1997 .

[30]  DuarteP.,et al.  Experimental and numerical study on the effect of repairing reinforced concrete cracked beams strengthened with carbon fibre reinforced polymer laminates , 2014 .

[31]  Hamid R. Ronagh,et al.  Web-bonded FRPs for relocation of plastic hinges away from the column face in exterior RC joints , 2011 .

[32]  Michael H. Scott,et al.  Plastic Hinge Integration Methods for Force-Based Beam¿Column Elements , 2006 .

[33]  G. Antaki.  Seismic Design and Retrofit , 2003 .

[34]  Mervyn J. Kowalsky,et al.  Effect of Load History on Performance Limit States of Circular Bridge Columns , 2013 .

[35]  Rui Pinho,et al.  Numerical Issues in Distributed Inelasticity Modeling of RC Frame Elements for Seismic Analysis , 2010 .

[36]  Kevin R. Mackie,et al.  Seismic Demands for Performance-Based Design of Bridges , 2003 .

[37]  Rejane Martins Fernandes Canha,et al.  Behavior of Socket Base Connections Emphasizing Pedestal Walls , 2009 .

[38]  M. Kowalsky,et al.  Stress-strain response of A706 grade 80 reinforcing steel , 2017 .

[39]  Chris P. Pantelides,et al.  Seismic Repair of Severely Damaged Precast Reinforced Concrete Bridge Columns Connected with Grouted Splice Sleeves , 2016 .