State of health estimation for lithium ion batteries based on an equivalent-hydraulic model: An iron phosphate application
暂无分享,去创建一个
Michel Kinnaert | Julien Schorsch | Alexandre Léonard | Luis D. Couto | Nathalie Job | M. Kinnaert | N. Job | J. Schorsch | Alexandre F. Léonard
[1] Karen E. Thomas-Alyea. Modeling Resistive-Reactant and Phase-Change Materials in Battery Electrodes , 2008 .
[2] P. Pisu,et al. Nonlinear Adaptive Observer for a Lithium-Ion Battery Cell Based on Coupled Electrochemical–Thermal Model , 2015 .
[3] T. Jacobsen,et al. Diffusion impedance in planar, cylindrical and spherical symmetry , 1995 .
[4] Wolfgang Dreyer,et al. The thermodynamic origin of hysteresis in insertion batteries. , 2010, Nature materials.
[5] D. Sauer,et al. Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries , 2014 .
[6] M. Safari,et al. Mathematical Modeling of Lithium Iron Phosphate Electrode: Galvanostatic Charge/Discharge and Path Dependence , 2011 .
[7] Christopher D. Rahn,et al. Model based identification of aging parameters in lithium ion batteries , 2013 .
[8] Giorgio Rizzoni,et al. Design and parametrization analysis of a reduced-order electrochemical model of graphite/LiFePO4 cells for SOC/SOH estimation , 2013 .
[9] Richard D. Braatz,et al. Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models , 2011 .
[10] M. Doyle,et al. Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .
[11] M. Krstić,et al. Adaptive Partial Differential Equation Observer for Battery State-of-Charge/State-of-Health Estimation Via an Electrochemical Model , 2014 .
[12] Taeyoung Han,et al. Full-Range Simulation of a Commercial LiFePO4 Electrode Accounting for Bulk and Surface Effects: A Comparative Analysis , 2014 .
[13] Siamak Farhad,et al. Simplified Electrochemical Multi-Particle Model for LiFePO4 Cathodes in Lithium-Ion Batteries , 2015 .
[14] Delphine Riu,et al. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications , 2013 .
[15] Peter C. Young,et al. Recursive Estimation and Time-Series Analysis: An Introduction , 1984 .
[16] V. Subramanian,et al. Towards real-time (milliseconds) parameter estimation of lithium-ion batteries using reformulated physics-based models , 2008 .
[17] Pallab Barai,et al. Mechano-Electrochemical Model for Acoustic Emission Characterization in Intercalation Electrodes , 2014 .
[18] Jianqiu Li,et al. A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .
[19] H. Fathy,et al. Reduction of an Electrochemistry-Based Li-Ion Battery Model via Quasi-Linearization and Padé Approximation , 2011 .
[20] Jake Christensen,et al. Modeling Diffusion-Induced Stress in Li-Ion Cells with Porous Electrodes , 2010 .
[21] I. Villarreal,et al. Critical review of state of health estimation methods of Li-ion batteries for real applications , 2016 .
[22] Chaoyang Wang,et al. Control oriented 1D electrochemical model of lithium ion battery , 2007 .
[23] Huazhen Fang,et al. Improved adaptive state-of-charge estimation for batteries using a multi-model approach , 2014 .
[24] Dong Zhang,et al. Remaining useful life estimation of Lithium-ion batteries based on thermal dynamics , 2017, 2017 American Control Conference (ACC).
[25] Michel Kinnaert,et al. SOC and SOH estimation for Li-ion battery based on an equivalent hydraulic model. Part II: SOH power fade estimation , 2016, 2016 American Control Conference (ACC).
[26] Pierluigi Pisu,et al. Combined estimation of State-of-Charge and State-of-Health of Li-ion battery cells using SMO on electrochemical model , 2014, 2014 13th International Workshop on Variable Structure Systems (VSS).
[27] Steven Dargaville,et al. Predicting Active Material Utilization in LiFePO4 Electrodes Using a Multiscale Mathematical Model , 2010 .
[28] Jay Lee,et al. Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility , 2014 .
[29] Gregory L. Plett,et al. Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 3. State and parameter estimation , 2004 .
[30] Ralph E. White,et al. Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries , 2006 .
[31] M. Safari,et al. Multimodal Physics-Based Aging Model for Life Prediction of Li-Ion Batteries , 2009 .
[32] Venkat Srinivasan,et al. Existence of path-dependence in the LiFePO4 electrode , 2006 .
[33] M. Wohlfahrt‐Mehrens,et al. Ageing mechanisms in lithium-ion batteries , 2005 .
[34] Huazhen Fang,et al. Adaptive Estimation of the State of Charge for Lithium-Ion Batteries: Nonlinear Geometric Observer Approach , 2015, IEEE Transactions on Control Systems Technology.
[35] James F. Manwell,et al. LEAD-ACID-BATTERY STORAGE MODEL FOR HYBRID ENERGY-SYSTEMS , 1993 .
[36] Pedro E. Arce,et al. Discharge Model for LiFePO4 Accounting for the Solid Solution Range , 2008 .
[37] Daniel A. Cogswell,et al. Coherency strain and the kinetics of phase separation in LiFePO4 nanoparticles. , 2011, ACS nano.
[38] Mehrdad Saif,et al. Online state and parameter estimation of the Li-ion battery in a Bayesian framework , 2013, 2013 American Control Conference.
[39] John Newman,et al. Effect of Anode Film Resistance on the Charge/Discharge Capacity of a Lithium-Ion Battery , 2003 .
[40] Long Cai,et al. Capacity Fade Model for Spinel LiMn2O4 Electrode , 2013 .
[41] Jason B. Siegel,et al. A lumped-parameter electro-thermal model for cylindrical batteries , 2014 .
[42] Hugues Garnier,et al. Direct continuous-time approaches to system identification. Overview and benefits for practical applications , 2015, Eur. J. Control.
[43] A. Stefanopoulou,et al. Lithium-Ion Battery State of Charge and Critical Surface Charge Estimation Using an Electrochemical Model-Based Extended Kalman Filter , 2010 .
[44] Ralph E. White,et al. Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries , 1998 .
[45] Christian Fleischer,et al. Critical review of the methods for monitoring of lithium-ion batteries in electric and hybrid vehicles , 2014 .
[46] Mohammadhosein Safari,et al. Mesoscopic modeling of Li insertion in phase-separating electrode materials: application to lithium iron phosphate. , 2014, Physical chemistry chemical physics : PCCP.
[47] James Marco,et al. Characterising Lithium-Ion Battery Degradation through the Identification and Tracking of Electrochemical Battery Model Parameters , 2016 .
[48] Mattia Ricco,et al. Overview of Lithium-Ion battery modeling methods for state-of-charge estimation in electrical vehicles , 2018 .
[49] Chris Manzie,et al. PDE battery model simplification for SOC and SOH estimator design , 2015, 2015 54th IEEE Conference on Decision and Control (CDC).
[50] Daniel A. Cogswell,et al. Suppression of phase separation in LiFePO₄ nanoparticles during battery discharge. , 2011, Nano letters.
[51] Ralph E. White,et al. Parameter Estimation and Life Modeling of Lithium-Ion Cells , 2008 .
[52] Charles Delacourt,et al. Mathematical Modeling of Commercial LiFePO4 Electrodes Based on Variable Solid-State Diffusivity , 2011 .
[53] L. Guzzella,et al. Model-based distinction and quantification of capacity loss and rate capability fade in Li-ion batteries , 2010 .
[54] Michel Kinnaert,et al. SOC and SOH estimation for Li-ion batteries based on an equivalent hydraulic model. Part I: SOC and surface concentration estimation , 2016, 2016 American Control Conference (ACC).
[55] P. Young,et al. Refined instrumental variable methods of recursive time-series analysis Part III. Extensions , 1980 .
[56] Rolf Findeisen,et al. Electrochemical Model Based Observer Design for a Lithium-Ion Battery , 2013, IEEE Transactions on Control Systems Technology.
[57] Peter C. Young,et al. Instrumental variable methods for identifying partial differential equation models of distributed parameter systems , 2012 .
[58] M. Doyle,et al. Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .
[59] Simona Onori,et al. Electrochemical Model-Based State of Charge and Capacity Estimation for a Composite Electrode Lithium-Ion Battery , 2016, IEEE Transactions on Control Systems Technology.
[60] Jasim Ahmed,et al. Algorithms for Advanced Battery-Management Systems , 2010, IEEE Control Systems.
[61] Pedro E. Arce,et al. A Discharge Model for Phase Transformation Electrodes: Formulation, Experimental Validation, and Analysis , 2007 .
[62] Ruben H. Milocco,et al. Generic dynamic model of rechargeable batteries , 2014 .
[63] Mohammadhosein Safari,et al. Modeling of a Commercial Graphite/LiFePO4 Cell , 2011 .
[64] Ralph E. White,et al. Mathematical modeling of the capacity fade of Li-ion cells , 2003 .
[65] Xiaosong Hu,et al. A comparative study of equivalent circuit models for Li-ion batteries , 2012 .
[66] Chao Lyu,et al. Non-Destructive Analysis of Degradation Mechanisms in Cycle-Aged Graphite/LiCoO 2 Batteries , 2014 .
[67] Huazhen Fang,et al. State of charge estimation for lithium-ion batteries: An adaptive approach , 2014 .
[68] Yi-Jun He,et al. State of health estimation of lithium‐ion batteries: A multiscale Gaussian process regression modeling approach , 2015 .
[69] Beshah Ayalew,et al. A Diagnostic Scheme for Detection, Isolation and Estimation of Electrochemical Faults in Lithium-Ion Cells , 2015 .
[70] D. Simon. Kalman filtering with state constraints: a survey of linear and nonlinear algorithms , 2010 .
[71] Mohammadhosein Safari,et al. Analysis of lithium deinsertion/insertion in LiyFePO4 with a simple mathematical model , 2010 .
[72] Danijel Pavković,et al. Dual EKF-based State and Parameter Estimator for a LiFePO4 Battery Cell , 2017 .
[73] Venkat Srinivasan,et al. Discharge Model for the Lithium Iron-Phosphate Electrode , 2004 .
[74] Lei Zhang,et al. Co-estimation of state-of-charge, capacity and resistance for lithium-ion batteries based on a high-fidelity electrochemical model , 2016 .
[75] Ralph E. White,et al. State of Charge and Loss of Active Material Estimation of a Lithium Ion Cell under Low Earth Orbit Condition Using Kalman Filtering Approaches , 2012 .
[76] V. Subramanian,et al. Mathematical Model Reformulation for Lithium-Ion Battery Simulations: Galvanostatic Boundary Conditions , 2009 .
[77] K. S. Nanjundaswamy,et al. Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .