Computer simulation of tooth contact analysis of mismatched spiral bevel gears

[1]  J. J. Coy,et al.  Surface Geometry of Circular Cut Spiral Bevel Gears , 1982 .

[2]  Yi Zhang,et al.  Local Synthesis and Tooth Contact Analysis of Face-Milled Spiral Bevel Gears , 1991 .

[3]  Vilmos Simon.  Load Distribution in Double Enveloping Worm Gears , 1993 .

[4]  Vilmos Simon,et al.  Tooth contact analysis of mismatched hypoid gears , 1996 .

[5]  Robert F. Handschuh.  Recent Advances in the Analysis of Spiral Bevel Gears , 1997 .

[6]  Chung-Biau Tsay,et al.  MATHEMATICAL MODEL OF SPIRAL BEVEL AND HYPOID GEARS MANUFACTURED BY THE MODIFIED ROLL METHOD , 1997 .

[7]  Chung-Biau Tsay,et al.  Computer-aided manufacturing of spiral bevel and hypoid gears with minimum surface-deviation , 1998 .

[8]  Louis Cloutier,et al.  Experimental and numerical investigation of the meshing cycle and contact ratio in spiral bevel gears , 1998 .

[9]  C. Gosselin,et al.  Corrective machine settings of spiral-bevel and hypoid gears with profile deviations , 1999 .

[10]  Hisashi Tamura,et al.  Klingelnberg spiral bevel gears with small spiral angles , 1999 .

[11]  Vilmos Simon,et al.  Load Distribution in Hypoid Gears , 2000 .

[12]  Vilmos Simon,et al.  Load Distribution in Cylindrical Worm Gears , 2000 .

[13]  Márk Lelkes,et al.  Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry , 2002 .

[14]  Alfonso Fuentes,et al.  Computerized integrated approach for design and stress analysis of spiral bevel gears , 2002 .

[15]  Faydor L. Litvin,et al.  Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears , 2002 .

[16]  Veniamin Goldfarb,et al.  Advanced Computer Modeling Technique in Gear Engineering , 2003 .